350mm copie i nia i te roi puaahorofenua buka lathe–1000mm machining
Main performance(C6232D-1000)
1. Swing over bed diameter 350mm
2. Max. machining length up to 1000mm
3. Max. swing over bed diameter 520mm on saddle place
4. Strong performance for the casting base
5. Distance between the hard rails up 320mm
6. Machining precision is IT8
7. Machining work piece roundness is not exceeding 0.01mm,
8. Machining work piece plainness is not exceeding 0.013mm/Ø200mm
9. Surfaceness(Ra) is not exceeding 2.8um
10. Machining diameter consistency is not exceeding 0.018mm/300mm
11. The machine has high precision, low noise, good rigidity, new style, etc
Main Specification
Model | C6232D-1000 | |
Swinging over bed | 350mm | |
E mea machining roa o Max i te ohipa | 1000mm | |
Width of guide on bed | 320mm | |
Max machining diameter on tool carrier | 190mm | |
Max. Z-axis travel of tools supporter | 880mm | |
Max. X-axis travel of tools supporter | 220mm | |
Bore through material diameter | Ø45mm | |
Max. swinging diameter on saddle | 520mm | |
Max. machining Length with transition plate | 200mm | |
Spindle | Spindle Center height | 175mm |
Spindle connection | C6 | |
Spindle sa diameter | Ø46mm | |
Taper o spindle i faaite | MT6 | |
Ua vitiviti te spindle | 25-1600r/min 12 grades | |
Tailstock | Taper of top sleeve | MT4 |
Tail stock sleeve max travel | 130mm | |
Tail stock horizontal max travel | ±10mm | |
Screw threads | Threads metric pitches | 0.45-20mm/r 30 models |
Threads inch pitches | 80-1-3/4n/1” 35 models | |
Threads modulo pitches | 0.25-10mm 25 models | |
Threads diametral pitches | 160-3-1/2 DP 30 models | |
Spindle motor model | YD132M-8/4-B5 3/4.5 kw | |
Main drive belt model & spec | 4-A-1900mm, 4-A-2000mm | |
Motor | Main motor | 3 / 4.5 KW |
Main motor speed 50Hz | 1500 r/min | |
Cooler pump motor | 90W | |
Overall dimension(L x W x H) | 1000 mm | 2200mmx950mmx1200mm |
Te mau nota | 1450 kg |
Precision standard
Unit:mm
Hiopoaraa materia | China standard | Fare hamaniraa ture |
Machining precision | IT8 | IT8 |
Precision of machining work piece roundness | 0.007mm | 0.006mm |
Precision of machining work piece cylindricity | 0.015mm/Ф300mm | 0.013mm/Ф200mm |
Machining te ohipa surfaceness | Ra3.2μm | Ra2.8μm |
Machining te ohipa planeness | 0.02mm / 300mm | 0.018mm / 300mm |
Configuration standard accessories
Name | Specification | Brand | Remark |
Main motor | 3 KW Three-phase asynchronous motor | Made in china | |
Spindle te faaiteraa | Precision grade5 | Made in china | |
X -axis ball screw | Made in china | ||
Z- axis ball screw | |||
Manual chuck | 8 inches(3 Jaws chuck 200mm) | Made in china | |
Electrical components | Made in china |
Standard accessories:
No. | Name | Specification | QTY |
1 | A set of lighting | 1 set | |
2 | Cooling system | 32A-10001 | 1 set |
3 | Adjustable mount | 3# | 6 set |
4 | 3 Jaws chuck | KZ200 | 1 set |
5 | 3 Jaws chuck transit plate | 32D-09701 | 1 set |
6 | Tailstock | D114 | 1 set |
7 | Tailstock quill | P326*4 | 1 set |
8 | Double head spanner | 12×14 S91-1 | 1 set |
9 | Double head spanner | 17×19 S91-1 | 1 set |
10 | Double head spanner | 12×24 S91-1 | 1 set |
11 | Single head spanner | 30 S91-2 | 1 set |
12 | Square box spanner | 12 S92-3 | 1 set |
13 | Slotted nut single-end spanner | 38-42 S93-1 | 1 set |
14 | Slotted nut single-end spanner | 45-52 S93-1 | 1 set |
15 | Slotted nut single-end spanner | 100-110 S93-1 | 1 set |
16 | Slotted nut single-end spanner | 115-130 S93-1 | 1 set |
17 | inner hexagon spanner | 5 S91-7 | 1 set |
18 | inner hexagon spanner | 6 S91-7 | 1 set |
19 | inner hexagon spanner | 8 S91-7 | 1 set |
20 | inner hexagon spanner | 10 S91-7 | 1 set |
21 | Screwdriver | 150 | 1 set |
22 | Oil gun | YQ100 | 1 set |
23 | Foot bolt | M16×400;GB799-76 | 8 set |
24 | Nut | M16;GB52-76 | 8 set |
25 | Washer | 16;GB97-76 | 8 set |
26 | Triangle belt | 32A a model 1900 | 4 set |
27 | Brake block | 32A-01041 | 2 set |
29 | Brake wire | Ø2.8*1250 | 1 set |
Technical date:
1. | Machine user manual | 1 set |
2. | Machine certification | 1 set |
3. | Packing list | 1 set |
Send your message to us:

-
500mm copie i nia i te roi buka lathe –1000mm machining
-
400mm copie i nia i te roi buka lathe –1500mm machining
-
800mm copie i nia i te roi buka lathe –1000mm machining
-
500mm copie i nia i te roi puaahorofenua buka lathe –3000mm machining
-
500mm copie i nia i te roi puaahorofenua buka lathe –2000mm machining
-
500mm copie i nia i te roi puaahorofenua buka lathe –1500mm machining
-
500mm copie i nia i te roi puaahorofenua buka lathe –1000mm machining
-
420mm copie i nia i te roi puaahorofenua buka lathe –3000mm machining