1.Stable good performance bar feeder
2.Small bar feeder, it is easy to install
3.Low noise for the whole unit
4.Customized bar feeder can be designed
5.It is easy to operate
6.PLC setting, it is easy to install and to do service
7.Simple I/0 manual, can be connected with NC and CNC machine

The saddle adopts rectangular guide rail structure with high rigidity,high strength and high abrasion resistance,which greatly meets the requirements of heavy cutting,stable grain and long service life;
Adopt gearbox automatic shifting structure,one person can operate 2-4 sets,saving cost and improving efficiency;
The gearbox and spindle are separated to separate the vibration and temperature rise so to improve the machining accuracy;
The lathe bed adopts the integrated casting technology high strength,high rigidity,guarantee the processing stability;
The chip collecting disc adopts the separated back and forth moving structure,and the operation is pleasant and efficient;
The machine is suitable for turning of long shaft,large diameter disc and high hardness parts,with outsanding heavy cutting ability.

1.Max.swing diam. Over lathe 500mm
2.Max.length of the work piece:1000mm,1500mm,2000mm
3.Guide span 420mm
4.Height of the centre 265mm
5.Monolithic conjoined structure of lathe bed, large span guide rail.Z direction guide rail spans 420mm,while X direction spans 230mm High rigidity,small vibration,can with stand large cutting torque,and adapt to the strong cutting and fine finishing.
6.Separate transmission is used in the main drive system(independent spindle structure,three gear automatic shift gearbox,continuously speed regulation) to eliminate the influence to the precision machining parts caused by the motor vibration and heat.and the spindle system has the advantages of low thermal deformation, good accuracy stable.

The main transmission adopts the structure of “large torque output + A11 independent spindle”,which can adapt to hard cutting,heavy cutting and other processing methods;
Adopt”Y-axis power knife tower + tail seat structure”,the size range of machining shaft parts(the maximum processing range diameter 580mm length 850mm),greatly improve the processing flexibility;the power shaft output can be selected 7.5KW, can achieve”strong milling,strong drilling”,greatly improve the composite processing beat efficiency;
The machine tool base is optimized by finite element analysis and has better rigidity;
The X and Z axes adopt the pre-streched structure,which reduces the influence of thermal deformation on the accuracy,and improves the rigidity;
This model is especially suitable for processing materials high hardness,large margin,heavy weight, with composite process and other disc,shaft parts;with high cutting efficiency,accuracy and stability advantages;
The X/Z axis of this model adopts 55/45 he

Adopt gearbox automatic shifting structure, one person can operate 2-4 sets, saving cost and improving efficiency;
The gearbox and spindle adopt the separated-structure to separate the vibration and temperature rising therefore can improve the machining accuracy;
The machine bed adopts the integrated casting technology high strength, high rigidity,guarantee the processing stability;
The chip collecting disc adopts the separated back and forth moving structure, and the operation is pleasant and efficient;
This machine is suitable for long shaft and large diameter disc parts, which need to be clamped once for turning, drilling and milling. It has the highly flexible process.

Adopt gearbox automatic shifting structure, one person can operate 2-4 sets, saving cost and improving efficiency;
The gearbox and spindle adopt the separated-structure to separate the vibration and temperature rising therefore can improve the machining accuracy;
The machine bed adopts the integrated casting technology high strength, high rigidity,guarantee the  processing stability;
The  chip  collecting  disc  adopts  the  separated  back  and forth  moving  structure,  and  the  operation  is pleasant and efficient;
This machine is suitable for long shaft and large diameter disc parts, which need to be clamped once for turning, drilling and milling. It has the highly flexible process.

1.Swing over lathe diameter 400mm
2.Max.length of the work piece:750mm,1000mm
3.Max. Diam. Processing over the lathe 400mm
4.Height of the centre 200mm
5.Monolithic conjoined structure of lathe bed.
6.The Sliding surface of the lathe rail is plastics sticking.the friction damping is low.
7.The machine tool has a good consistency that the precision can achieve stably level IT 7-IT6,and the processing surface roughness can reach Ra1.6.

The machine has high precision,low noise,good rigidity,etc.
It can be used to process automatically various parts of the cylindrical,round,end face,cone and arbitrary conic cylindrical turning processing, and can be used in drilling,reaming processing.
The machine drive by the motor,through the gears in the headstock,the spindle can make the speed regulation from high,medium and low-grade steplessly.
Due to large gear(i=21),makes the speed range is larger,with large torque in medium-low-speed machine,gear has higher strength,and it is able to bear the larger impact due to the positive and negative moving,abrupt stop,and variable speed,variable speed can be realize from high,medium to low by a handle and it is easy to operate.

1.Max.swing diam. Over lathe 630mm
2.Max.length of the workpiece:1000mm,1500mm,2000mm,3000mm
3.Machined max.diameter on the bed body 560mm
4.Height of the centre 315mm

TSUGAMI B0386LA-III CNC precision automatic lathe
Special spindle with guide bush-less-kit, high-precision machining of short work-pieces can be achieved
Equipped with a retractable spring chuck to ensure stable clamping of short work-pieces
No need to grind materials (cold drawn materials can be used to save costs)
Remaining materials can be shortened and raw material costs reduced.