1.Swing over bed 800mm 2.Spindle center height 400mm 3.Max length of machining workpiece 2000mm,3522mm 4.Guild way cover width on bed 510mm 5.Spindle bore diameter 82mm

This lathe can rough and finish machining of internal and external cylinders, cones and other forms of rotational surfaces of ferrous metals, non-ferrous metals and non-metallic workpieces; it can turn various commonly used metric, inch, module, diameter pitch threads and multi-start threads; Carry out processing work such as drilling, reaming and oil groove broaching. It can perform large-pitch thread turning, and the spindle aperture is φ82. It is also suitable for processing large-diameter pipe parts. When the machine tool is finished, its roundness error shall not be greater than 0.01mm, its cylindricity error shall not be greater than 0.01mm on a 100mm measuring length, its surface roughness (Ra) shall not be greater than 25μm, and the accuracy of the finely turned thread specimen shall be the pitch on a length of 300mm. The error is not greater than 0.06mm; it is driven by a fast motor, and the tool holder moves vertically and horizontally, saving processing auxiliary time. The t

This lathe can rough and finish machining of internal and external cylinders, cones and other forms of rotational surfaces of ferrous metals, non-ferrous metals and non-metallic workpieces; it can turn various commonly used metric, inch, module, diameter pitch threads and multi-start threads; Carry out processing work such as drilling, reaming and oil groove broaching. It can perform large-pitch thread turning, and the spindle aperture is φ82. It is also suitable for processing large-diameter pipe parts. When the machine tool is finished, its roundness error shall not be greater than 0.01mm, its cylindricity error shall not be greater than 0.01mm on a 100mm measuring length, its surface roughness (Ra) shall not be greater than 25μm, and the accuracy of the finely turned thread specimen shall be the pitch on a length of 300mm. The error is not greater than 0.06mm; it is driven by a fast motor, and the tool holder moves vertically and horizontally, saving processing auxiliary time.

This machine is a light reinforced forming machine. The maximum processing length is 350mm and the through hole diameter is 46mm. It is a horizontal lathe.

It is mainly used for turning the outer circle, inner circle, end face, taper, and grooving of various parts, as well as metric threads, inch threads, module threads, and radial pitch threads. The saddle lathe is a variant of the horizontal lathe and is suitable for processing larger diameter disc parts. The lathe has a wide working range, high rotation speed and strong rigidity. It is suitable for high-speed and powerful cutting of various ferrous and non-ferrous metals using carbide.