Leading CNC machine manufacturer of precise CNC lathe for all Industry - SOUTH Lathe

CNC Vertical Machining Center, Tailstock CNC Lathe Machine CK52T-600 1

CNC Vertical Machining Center, Tailstock CNC Lathe Machine CK52T-600 2

CNC Vertical Machining Center, Tailstock CNC Lathe Machine CK52T-600 3

CNC Vertical Machining Center, Tailstock CNC Lathe Machine CK52T-600 4

CNC Vertical Machining Center, Tailstock CNC Lathe Machine CK52T-600

The bed and base are all made of resin sand and cast in one piece, without adding cement. The internal stress removal method of the cast iron is completely vibrated/fully annealed/insulated/aging, and then placed for a period of time after finishing and then tested to pass the test.

Spindle bore diameter:

Ø66 mm

Spindle model:

A2-6

Max.bar material diameter:

Ø51-55

Max. turning length:

560mm

Swing over lathe diameter:

800mm

Inquiry

Write a Review

Introduction

● This machine tool is designed to process stainless steel, titanium alloy, and high-temperature alloy materials.

● The bed and base are all made of resin sand and cast in one piece, without adding cement. The internal stress removal method of the cast iron is completely vibrated/fully annealed/insulated/aging, and then placed for a period of time after finishing and then tested to pass the test.

1 (4)

3 (4)

4 (2)

characteristic

CNC Vertical Machining Center, Tailstock CNC Lathe Machine CK52T-600 8

Fully automatic feeder (servo feeding)

CNC Vertical Machining Center, Tailstock CNC Lathe Machine CK52T-600 9

Automatic material receiving hand + conveyor belt

Chain plate chip conveyor.

Main Specification

Model of lathe		CK52T-600
Machining capacity	Max. swing diam. over lathe	Ø800mm
	Maximum turning diameter	Ø180--400mm
	Max. turning length	560mm
	Maximum bar material diameter	Ø51-55
Spindle	Spindle model	A2-6
	Spindle bore diameter	Ø66 mm
	Max. Spindle speed	max.4200r/min
	Setting spindle speed	1-3500 rpm
X/Z axis feeding	X-axis maximum travel	230 mm
	Z-axis maximum travel	600mm
	X/Z axis screw specifications	40 mm
	X/Z axis max. fast travel speed	24 m/min
	X/Z axis setting rapid movement	16/18
	X/Z axis roller rail specifications	35/45 mm
Tttt Turret tools	Servo turret center height	100mm
	Turret center height	100mm
	Static Tools dimension	25x25 mm
	Boring tools	Ø25
MOMOTO Motor	Main motor power	11kw
	Spindle motor torque	Rated 72 N.M
	X/Z axis motor power	SYNTEC2.4KW or YASKAWAI1.8KW
	X/Z axis motor torque	SYNTEC 11.5 N.M or YASKAWAI 11.5 N.M
	Turret tool change motor power/torque	SYNTEC1.0KW/3.1 N.M
	Cooling system motor power	0.3KW
	High pressure cooling system motor power	3KW
Tailstock	Tailstock travel	420 mm
	Tailstock hydraulic unit maximum travel	100 mm
	Tailstock ejector pin drive type	Hydraulic, strong rigidity
	Tailstock thimble taper taper	Morse #5
	Distance between thimble and chuck	690 mm
Other items	Slanting bed degree	15 degrees
	Machine L x W x H	2500 x1600 x 1700 mm
	Machine net weight	4500 kg
	Total horse	20 KW
	average power consumption	3kw/h

Machine precision specification

Main inspection items	Detection method	factory standard
Spindle radial run-out	Detect run-out of outer cone	0.0025
X-axis repeat position	Detect repeated positioning of the X-axis. Note: First predict about 50 times to offset the error of the cold engine and hot engine, and then detect the repeated positioning.	0.0025
Z-axis repeat position	Detect repeated positioning on the Z axis. Note: First predict about 50 times to offset the error of the cold engine and hot engine, and then detect the repeated positioning.	0.0025
If the customer wants to test the ISO or VD1 accuracy of X/Z/Y axis, it shall be determined at the time of writing the contract. The customer must test this item at the same time of the initial acceptance of South Factory.

Configuration standard accessories

Name	Specification	Brand
NC controller	SYNTEC 22TA ,crystal panel10.4inches	Taiwan SYNTEC
X/Y axis servo driver	Standard setting SYNTEC2.4KW (optional：YASKAWAI 1.8kw),X-axis motor with brake	China
X/Y/Z-axis screw	C3 grade futures grinding screw with double nut. One end is blind threaded.	Taiwan PMI or Hiwin
X/Y-axis linear guild way	Roller P-level linear rail	Taiwan HIWIN OR PMI
Spindle	Standard, Taiwan POSA	Taiwan POSA
Spindle motor	SYNTEC 11kw,torque72N.m	Beijing CBT
Servo type turret	12-station turret, center height 100mm	Made in Taiwan
Rotary cylinder	High speed rotary cylinder	Made in China
One piece casting base	The bed and base are all made of resin sand and cast in one piece, without adding cement. The internal stress removal method of the cast iron is completely vibrated/fully annealed/insulated/aging, and then placed for a period of time after finishing and then tested to pass the test.	Made in china
Lubrication	Japan Valley brand lubricating oil pump (joint venture)	Made in China Foshan
Hydraulic unit	Guangzhou ZhanPing hydraulic station	Made in China
Machine metal cover	The outer cover is made of national standard thick 2mm cold plate	Made in China
Processing blow valve	Install 2 Air TAC solenoid valves to prepare for air blowing. The system controls the air blowing to realize the processing air blowing function.	Taiwan
Electrical distribution box cooling	Use copper tubes (durable) to install environmentally friendly heat transfer media heat exchanges to cool down the circulation in the electrical box and keep it clean.	Made in China
Electrical components	Schneider Electrical components	Made in China
power cable	5 meters cable, high temperature resistance, wear resistance and corrosion resistance	Made in China
Cooling pump	Water pump power 370W high pressure water pump. Spindle wall panel ejection	Made in China
High pressure pumps	3000W high pressure water pump,Hmax130M,2900r/min, turret ejection, programmable	Made in China

Standard Accessories with machine

Item	Name	Specification	Quantity	Remark
1	Spring collet	Standard	1 pcs
2	Enamel tool holder	Ø32	2PCS
3	Tool handle combination pressing block		8 pcs
8	Machine mattress iron		4 sets
9	Foot switch		1PCS
12	Allen wrench		1 set

Technical data with the machine

item	name	specification	quantity	remark
1	Machine tool maintenance and repair manual	Including M code, G code, circuit diagram	1set
2	SYNTEC User Manual	Ｕdisk	1 pcs	in accessories box
3	Turret user manual		1set	in accessories box
4	Servo driver user manual		1set	in accessories box

Get in touch with us

To pursuit for modern enterprise management, pursuit for customer first service, pursuit for product excellence. Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!