Leading CNC machine manufacturer of precise CNC lathe for all Industry - SOUTH Lathe
Cellphone/Whatsapp/Wechat: + 86 13928187729

CNC Mill Turn Center With 4+4 Power Heads, 4-Axis CNC Machining Center 1

CNC Mill Turn Center With 4+4 Power Heads, 4-Axis CNC Machining Center 2

CNC Mill Turn Center With 4+4 Power Heads, 4-Axis CNC Machining Center 3

CNC Mill Turn Center With 4+4 Power Heads, 4-Axis CNC Machining Center 4

CNC Mill Turn Center With 4+4 Power Heads, 4-Axis CNC Machining Center

This machine tool uses 4+4 power heads, the distance between the power head shafts is 65mm, and the power head passes the spindle center by 60mm, making processing easy. Plug-in tool holder, easy to install and remove.

Spindle bore diameter:

Ø56 mm

Spindle model:

A2-5

Max.bar material diameter:

Ø45

Max. turning length:

320mm

Swing over lathe diameter:

500mm

Main spindle speed:

Max6000r/min

Inquiry

Write a Review

Introduction

● This machine tool uses 4+4 power heads, the distance between the power head shafts is 65mm, and the power head passes the spindle center by 60mm, making processing easy. Plug-in tool holder, easy to install and remove.

● This machine tool has high dimensional accuracy in milling processing, shortens the tool change time, and has a long service life. It is suitable for processing small parts or products with particularly high requirements and high precision.

CK46-4+4+Y+T-7

CK46-4+4+Y+T-70

characteristic

CNC Mill Turn Center With 4+4 Power Heads, 4-Axis CNC Machining Center 7

The diameter of the heating and cooling machine changes by 0.01 mm, and the stable diameter changes within 0.005 mm.

CNC Mill Turn Center With 4+4 Power Heads, 4-Axis CNC Machining Center 8

The 4+4 power part of this machine tool (including the power head) is integral and has high dimensional accuracy in milling.

Main Specification

Model of lathe		CK46-4+4+Y
Machining capacity	Max. swing diam. over lathe	Ø500mm
	Max. turning length	320mm
	Maximum bar material diameter	Ø45
Spindle	Spindle model	A2-5
	Spindle bore diameter	Ø56 mm
	Max. Spindle speed	Max6000r/min
	Setting spindle speed	1-4500 rpm
X/Z/Y axis feeding	X-axis maximum travel	800 mm
	Z-axis maximum travel	470mm
	Y-axis maximum travel	310mm
	X/Z/Y axis max. fast travel speed	24(setting 18)/24(setting18)/15 (setting 8)m/min
	X/Z/Y -axis C3 grade screw	32/32/25 mm
	X/Z/Y axis roller P-level linear rail, extended slider	Ball35/Ball35/Roller25 mm，Lengthen the skateboard, increase the load and enhance rigidity
Turret	Eight-station turret	8 stations,It can be equipped with a double-hole tool holder, and 12 stations are optional.
Tttt Power Head	Power head tool support form	ER25
	Power head cutting tools	Z axis 4 + X axis 4, equipped with 4 fixed tool holders
	Maximum speed of power head	6000（setting 4000),Products that can be commonly processed at 4000 rpm
	The distance between the power head shaft and the shaft	65mm
MOMOTO Motor	Main motor power /torque	SYNTEC 7.5kw,47.75N.m,Optional 11KW, 70.03N.m for processing steel parts over Ø80mm
	X/Z /Y axis motor power	YASKAWAI1.3KW or SYNTEC 2.4 KW
	X/Z/Y axis motor torque	YASKAWAI 8.39N.M or SYNTEC 11.5 N.M
	X/Z axis Power head motor power / torque	SYNTEC 1.7KW/8 N.M
	Power head motor maximum speed	5000r/min,
Other items	Spindle positioning brake device	Hydraulic
	Slanting bed degree	35 degrees
	Machine L x W x H	2200 x1580 x 1900 mm
	Machine net weight	3430 kg
	Total horse	13 KW
	average power consumption	2kw/h

Machine precision specification

Main inspection items	Detection method	factory standard
Spindle radial run-out	Detect run-out of outer cone	0.0025
X-axis repeat position	Detect repeated positioning of the X-axis. Note: First predict about 50 times to offset the error of the cold engine and hot engine, and then detect the repeated positioning.	0.0025
Z-axis repeat position	Detect repeated positioning on the Z axis. Note: First predict about 50 times to offset the error of the cold engine and hot engine, and then detect the repeated positioning.	0.0025
Y-axis repeat position	Detect repeated positioning on the Y axis. Note: First predict about 50 times to offset the error of the cold engine and hot engine, and then detect the repeated positioning.	0.004
Power head clamping run-out	Cone beat	0.004
If the customer wants to test the ISO or VD1 accuracy of X/Z/Y axis, it shall be determined at the time of writing the contract. The customer must test this item at the same time of the initial acceptance of South Factory.

Configuration standard accessories

Name	Specification	Brand
NC controller	SYNTEC 22TB ,crystal panel10.4inches	Taiwan SYNTEC
X/Y axis servo driver	Standard setting SYNTEC 2.4KW (optional：YASKAWAI1.8kw),X-axis motor with brake	China
Spindle	Standard, Taiwan POSA	Taiwan POSA
Spindle brake	The main shaft is equipped with a hydraulic 4-cylinder disc brake to increase braking strength.	Made in China
Fully closed loop indexing	The spindle is equipped with Taiwan SYNTEC magnetic ring encoder	Taiwan SYNTEC
Rotary cylinder	High speed rotary cylinder	Taiwan
Spindle motor	SYNTEC 7.5KW servo motor	Taiwan
X/Y-axis screw	C3 grade futures grinding screw with double nut. One end is blind threaded.	Taiwan PMI or Hiwin
X/Y-axis linear guild way	Roller P-level linear rail	Taiwan HIWIN OR PMI
One piece casting base	The bed and base are all made of resin sand and cast in one piece, without adding cement. The internal stress removal method of the cast iron is completely vibrated/fully annealed/insulated/aging, and then placed for a period of time after finishing and then tested to pass the test.	Made in china
Lubrication	Japan Valley brand lubricating oil pump (joint venture)	Made in China Foshan
Hydraulic unit	Guangzhou ZhanPing hydraulic station.The user should prepare his own 46# original Great Wall anti-wear hydraulic oil 46#/30kg	Made in China
Cooling pump	Water pump power 370W high pressure water pump. Spindle wall panel ejection	Made in China
Machine metal cover	The outer cover is made of national standard thick 2.0-0.03mm cold plate	Made in China
Processing blow valve	Install 2 Air TAC solenoid valves to prepare for air blowing. The system controls the air blowing to realize the processing air blowing function.	Taiwan
Electrical distribution box cooling	Use copper tubes (durable) to install environmentally friendly heat transfer media heat exchanges to cool down the circulation in the electrical box and keep it clean.	Made in China
Electrical components	Schneider Electrical components	Made in China
power cable	5 meters cable, high temperature resistance, wear resistance and corrosion resistance	Made in China

Main configuration/parameters/

accuracy of power head

The main functional configuration and specifications of the turn-milling compound machine tool installation		The main technical parameters
Ling's high rigidity power head	1.Dual motor power head: ER25 radial power 5 heads + ER25 axial power 5 heads + ER25 axial and radial (non-rotating) 5 heads (boring tool holder)	Power head wheelbase	65mm
	Power head motor: equipped with axial and radial directions - Taiwan SYNTEC 2.4KW motor（≤4000r/min), using bus	Maximum speed of power head/Normal speed	≤6000r/min ≤4000r/min
	Note: Finished with one-time clamping of Japanese OKUMA pentahedron	Power head cone run-out accuracy	≤0.003mm
Oil cooler	In order to reduce the temperature of the power head, an oil cooler is required to extend the service life.	Power head measuring rod run-out accuracy at 30mm overhang	≤0.08mm
		Y-axis effective travel	260mm
Y axis screw	Taiwan PMI,(R25-5-fddc-0.008) C3 grade,Use double nuts	Y-axis repeat positioning accuracy	≤0.08mm
Y axis motor	Standard,SYNTEC2.4kw or YASKAWAI 1.3kw,With brake	Y-axis screw accuracy grade	C3 grade
Y axis rail	25 roller linear rail, P grade	Y-axis guide rail accuracy grade	C3 grade

Standard Accessories with machine

Item	Name	Specification	Quantity	Remark
1	Spring collet	Standard	1PCS	Installed on accessories or on the end face of machine tool spindle
2	Enamel tool holder	Ø25	1PCS
3	Enamel tool holder	Ø20	2PCS
4	Tool handle combination pressing block		8set	Mounted in accessory box or on turret
5	Machine mattress iron		4 sets	Packed in accessory box
6	Foot switch		1PCS	Packed in accessory box
7	Power head ER 25 collet		1SET	Mounted in accessory box or on turret
7	Power head wrench		2PCS	Choose one according to the power head
8	Allen wrench		1 set	Packed in accessory box
9	Internal support chuck flange		1 PCS	1 piece for every two machines

Technical data with the machine

item	name	specification	quantity	remark
1	Machine tool maintenance and repair manual	Including M code, G code, circuit diagram	1 set
2	SYNTEC User Manual	Ｕ disk	1 pcs	in accessories box
3	Turret user manual		1 set	in accessories box
4	Servo driver user manual		1 set	in accessories box

Get in touch with us

To pursuit for modern enterprise management, pursuit for customer first service, pursuit for product excellence. Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!