6-axis dual spindle Swiss lathe SZ-256EN
The spindle adopts a high-speed electric spindle, whose electromagnetic energy is directly converted into mechanical energy without transmission power loss, and the high speed of the spindle is achieved. The power curve at both ends realizes low-speed and high-torque output.
Introduction
● The spindle adopts a high-speed electric spindle, whose electromagnetic energy is directly converted into mechanical energy without transmission power loss, and the high speed of the spindle is achieved. The power curve at both ends realizes low-speed and high-torque output.
● Adopt a new heat source cooling scheme, use centralized cooling for the electric spindle and power head, and use a heat exchange in the electrical cabinet to reduce temperature rise.
characteristic
Main Specification
| Model of lathe | Unit | SZ-256EN | ||
| NC device | FANUC Oi-TF Plus | |||
| Power source | 200AVC | |||
| Lathe rated power | KW | 11 | ||
| Machining range | Machining range dia. | mm | Ø25 | |
| Main spindle max clamping dia. | mm | Ø25 | ||
| Max feed length (once) | mm | 240 | ||
| Main/sub spindle | Main spindle power | Kw | 2.2/3.7 | |
| Sub spindle power | Kw | 1.5/2.2 | ||
| Main spindle max through hole dia. | mm | Ø 27 | ||
| C axis resolution | ° | C1/C2 0.001 | ||
| Main/sub spindle rev speed | rpm |
Max10000/12000 |
||
| Sub spindle max clamping dia. | mm | Ø 20 | ||
| Sub spindle max through hole dia. | mm | Ø 27 | ||
| Main spindle max travel | With guide bush | mm | 240 | |
| Non guide bush | mm | 355 | ||
| Max tool installed qty. | pcs | 26 | ||
|
OD Turning tool |
Qty.×Model | 6×□12 | ||
| Cross live tool | Qty.×Model | 4×ER16 | ||
| Drilling dia. | mm | Max Φ10 | ||
| Tapping/Threading die dia. | rpm | Max M8 | ||
| Live tool rev speed | KW | Max 5000 | ||
| Live tool power | 0.75 | |||
| End-face tool(Main spindle) | Fixed | Qty.×Model | 4×ER16 | |
| Drilling dia. | mm | Max φ10 | ||
| Tapping/Threading die dia. | Max M8 | |||
| Live tool rev speed | rpm | -- | ||
| Live tool power | KW | -- | ||
| Live | Qty.×Model | -- | ||
| Drilling dia. | mm | -- | ||
| Tapping/Threading die dia. | -- | |||
| Live tool rev speed | rpm | -- | ||
| Live tool power | KW | -- | ||
| Back end-face tool(Sub spindle) | Fixed | Qty.×Model | 4×ER16 | |
| Drilling dia. | mm | Max φ10 | ||
| Tapping/Threading die dia. | Max M8 | |||
| live | Qty.×Model | 4×ER16 | ||
| Drilling dia. | mm | Max φ10 | ||
| Tapping/Threading die dia. | Max M6 | |||
| Live tool rev speed | RPM | Max.4000 | ||
| Live tool power | KW | 0.75 | ||
| Rapid feed speed | m/min | '30(Z1/Z2/X2/Y) 24(X1)15(Y2) | ||
| Feed motor power | KW | '1(Z1/Z2/X1/X2/Y1)0.4(Y2) | ||
| OD Turning tool | 4ר12 | |||
| Electronic rotary guide bush | KW | 1 | ||
| Rapid feed speed | m/min | 24(Z1/Z2/X1/X2/Y1/Y2) | ||
| Feed motor power | KW | 1.5(Z1/Z2/X1/X2/Y1/Y2) | ||
| Cutting oil pump power | KW | 0.4 | ||
| Main/sub spindle cooling oil pump power | KW | 0.7 | ||
| Lubricating oil pump power | KW | 0.035 | ||
| Max collecting length of workpieces collect box | mm | 100 | ||
| Main/sub spindle center to the bottom of lathe body | mm | 1100 | ||
| Cutting oil tank volume | L | 300 | ||
| Air pressure | Mpa | ≥0.5 | ||
| Net weight | kg | 5000 | ||
| Dimensions(L×W×H) | mm | 2850×1906×2060 | ||
| Cutting oil pump power | KW | 0.4 | ||
| Main/sub spindle cooling oil pump power | KW | 1.2 | ||
| Lubricating oil pump power | KW | 0.35 | ||
| Max collecting length of workpieces collect box | MM mm | 80 | ||
| Main/sub spindle center to the bottom of lathe body | mm | 1050 | ||
| Cutting oil tank volume | L | 180 | ||
| Net weight | kg | 2700 | ||
| Dimensions(L×W×H) | mm | '2178×1278×1780 | ||
Standard configuration
1. Taiwan Syntec control system
2. 10.4 inch Color LCD display
3. Main/sub spindle cooling system
4. Lubrication system
5. Rotatory guide bush
6. Main/sub spindle air blowing device
7. LED working light
8. Electric leakage protection
9. Transformer
10. External light connector
11. 3-colour tower light
12. HIWIN/PMI screw/guide rail, Class 3
13. Main/sub spindle collet 1pcs; guide bush 1 pcs
14. Tool cabinet
15. Cutting oil tank
Optional configuration
1. Automatic bar feeder
2. Chip conveyor
3. Oil mist collector
4. High pressure pump
5. Long workpiece collector
6. Workpiece belt conveyor
7. External working light
8. Tap breakage detector
9. Cut-off tool breakage detector
10. Special shaped material clamping device
11. Automatic fire extinguisher
SOUTH lathe is a professional CNC machine manufacturer of turning-milling drilling, tapping and carving combined machine tool.
Contact Us
+86 13928187729
+86 13928187729
manager@jeasoncnc.com / js_john@vip.163.com
No.3 Huafu Road, Bianjiaojuweihui, Ronggui town Shunde Foshan City, Guangdong Pronvice China.
