Leading CNC machine manufacturer of precise CNC lathe for all Industry - SOUTH Lathe

Heavy Duty Lathe Composite CNC Turn Mill Machine CN-DX50 1

Heavy Duty Lathe Composite CNC Turn Mill Machine CN-DX50 2

Heavy Duty Lathe Composite CNC Turn Mill Machine CN-DX50 3

Heavy Duty Lathe Composite CNC Turn Mill Machine CN-DX50 4

Heavy Duty Lathe Composite CNC Turn Mill Machine CN-DX50 5

Heavy Duty Lathe Composite CNC Turn Mill Machine CN-DX50 6

Heavy Duty Lathe Composite CNC Turn Mill Machine CN-DX50 7

Heavy Duty Lathe Composite CNC Turn Mill Machine CN-DX50

This machine is suitable for long -axis and large diameter disk parts to be equipped with a folder for car cutting, drilling, and baht composite processing. The craftsmanship is extremely flexible.

Max. Diam.processing over the lathe:

300mm

Max.length of the work piece:

2000mm

Height of the centre:

1030mm

Spindle speed:

Three gear automatic shift gearbox 34-2000r/min

Max.swing diam.over lathe:

500mm

Inquiry

Write a Review

Introduction

● The dandruff plate adopts a separate front and rear movement structure, and the operation is pleasant and efficient.

● The power head uses the side three axes with Y axis,the maximum rotate speed is over 3000r/min,it greatly improve production efficiency.

● This machine is suitable for long -axis and large diameter disk parts to be equipped with a folder for car cutting, drilling, and baht composite processing. The craftsmanship is extremely flexible.

CN-DX50F内视图~1

heavy duty cnc lathe machine CN-DX50-1~1

heavy duty cnc lathe machine CN-DX50-2~1

heavy duty cnc lathe machine CN-DX50-5~1

heavy duty cnc lathe machine CN-DX50-6~1

CN-DX50-2

characteristic

Heavy Duty Lathe Composite CNC Turn Mill Machine CN-DX50 14

Adopt the gear box automatic transformation structure, 1 person can operate 2-4 units, saving cost improvement efficiency.

Heavy Duty Lathe Composite CNC Turn Mill Machine CN-DX50 15

The gear box and the main axis implement the separation structure, which isolate the vibration and temperature rise to improve the processing accuracy.

The bed body adopts the one -type casting process -high strength and high rigidity to ensure the stability of processing.

Main Specification

Model of lathe				CN-DX50
Main specifications	Max. swing diam. over lathe			500mm
	Max.length of the work piece			1000mm		1500mm	2000mm
	Dimension of the tailstock			1050mm		1550mm	2050mm
Processing range	Max. Diam.processing over the lathe			300mm
	Max. Diam.processing on the slider plate			300mm
	Max. Processing length relative to turret (live center to jaw)			830mm	1330mm		1830mm
	Max.processing length relative to turret (live center to jaw)			680mm	1180mm		1680mm
	Max.diam.of the bar can through the spindle hole			80mm(option 120mm)
Processing accuracy	X axis repeat position accuracy			0..006
	Z axis repeat position accuracy			0.013mm	0.016mm		0.02mm
	X axis position accuracy			0.03mm
	Z axis position accuracy			0.032mm	0.04mm		0.045mm
Man-machine handling distance	Height of the center(from the centre of the spindle to the bottom of machine)			1030mm
The spindle performance	Spindle bore			82mm(option 122mm)
	Spindle head collect taper			1:20 /Ø90(option 1:20/Ø130)
	Spindle speed			Three gear automatic shift gearbox 34-2000r/min H: 215-2000r/min M:76-700r/min L:34-320r/min
Power head performance	Power head clamping range			ER25(Ø1-(Ø16mm)
	Dynamic form			Side three axis with Y axis
	Max.rotate speed			3000r/min
	Power head spacing			60mm
The motor performance	Main motor power			7.5KW
	Power of power head motor			1.5KW
	Power of power head Y axis motor			1.2KW
	Longitudinal ( Z direction)servo motor power			1.5KW
	Lateral(X direction) servo motor power			1.2KW
	Type of cooling pump			AYB-20 0.115KW
Clamping	Standard chuck		Diameter of chuck	8 inch ( Manual)
Feed shaft performance	X axis rapid movement speed			4m/min
	Z axis rapid movement speed			8m/min			6m/min
	Travel of X axis			310mm
	Travel of Z axis			1020mm	1520mm		2020mm
Tailstock performance	Cone of the tailstock quill			MT5
	Max.stroke of the tailstock quill			150mm
	Max.transverse movement			±15mm
Turret performance	Type of the turret			Horizontal 6 working station
	Turret transfer time:every workstation 45°/60°			2.8s/3s
	Size of the cutting tool	External circular cutting tool		25 x 25
		Boring blade diameter		Ø25mm
Center frame performance	Clamping range			≤200mm
Machine dimension(L x W x H)				3081.5mm x 1658mm x 1780mm	3581.5mm x 1658mm x 1780mm		4081.5mm x 1658mm x 1780mm
Weight				2600kg	3100kg		3600kg

Get in touch with us

To pursuit for modern enterprise management, pursuit for customer first service, pursuit for product excellence. Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!