Light Duty CNC Lathe for Machining Pipes/Sleeves High Precision Grade Line Rail CNC Machine
1.The machine tool base is optimization designed under the finite element analysis,so that it has a good rigid;
2.The spindle is the spindle with the Taiwan sleeve,it is high speed,good accuracy,good dynamic characteristics;
3.Use the Taiwan high precision grade line rail and ball screw,smooth transmission,low noise,high positioning accuracy;
4.X axis adopts pre-stretching structure,reduce the influence of thermal deformation on the X axis accuracy and improved the X axis rigidity;
5.There is an oil-water separation mechanism in Z direction designed,which can effectively reduce the pollution of lubricant into the water tank cooling fluid;
6.The machine is especially suitable for processing small axis,tube and sleeve parts,with high speed and precision,good finish,stable size consistency,etc.
Introduction
● Lathe bed slope 45°
● Max. diam. processing over the lathe 480mm
● Max. drilling diam.(axle and sleeve) 290mm
● Max .diameter of the bar Ø52mm
● The machine tool base is optimization designed under the finite element analysis,so that it has a good rigid;
● The spindle is the spindle with the Taiwan sleeve,it is high speed,good accuracy,good dynamic characteristics;
characteristic
Main Specification
| Model of lathe | CN-X52 | CN-X52L | |
| Main specifications | Max. swing diam. over lathe | 500mm | |
| Lathe bed slope | 45° | ||
| Processing range | Max. diam. processing over the lathe | 480mm | |
| Max. drilling diam.(axle and sleeve) | 290mm | ||
| Max.length of processing (Collet chuck) | 275mm | 405mm | |
| Max. length of processing(hydraulic chuck) | 275mm | 405mm | |
| Max. length of processing(hydraulic chuck) | 215mm | 325mm | |
| Max .diameter of the bar | Ø52mm | ||
| Height of the centre(from slide plate to the centre of the spindle) | 80mm(150mm special order) | ||
| Spindle | Spindle bore | Ø62mm | |
| Type of the spindle head | A2-6 | ||
| Spindle head collect taper | Diameter 68,1:20 | ||
| Max. speed of spindle | 3500r/min | ||
| Clamp | The hydraulic clamp | A2-6 | |
| Turret | Type of the turret | Row tool | |
| Size of the turret | 20 x 20mm | ||
| Size of the turret | Ø25mm | ||
| Feed shaft | Max. X direction travel | 970mm | |
| Max. Z direction travel | 395mm | 520mm | |
| X/Z. axis rapid movement speed | 24/24m/min | ||
| Max. feeding speed of cutting | 8000mm/min | ||
| The Z axis screw backlash | 0.01 | ||
| The X axis screw backlash | 0.01 | ||
| Processing accuracy | Roundness | 0.003 | |
| Taper | 0.005/100 | ||
| Coaxiality | 0.004/100 | ||
| Position accuracy | ±0.005 | ||
| Repeat position accuracy | ±0.0025 | ||
| Motor | Main motor power(standard configuration) | 7.5KW | |
| Power of X / Z axis drive motor | 1.3KW | ||
| The longitudinal(Z direction)servo motor torque | 8.34N.m(YASKAWAI),7.5N.m(GKS/Kanedi | ||
| The transverse(X direction)servo motor torque | 8.34N.m(YASKAWAI),7.5N.m(GKS/Kanedi | ||
| Type of cooling pump | AYB-20 0.115KW | ||
| Total power | 15KW | ||
| Machine dimension(L x W x H) | 2170mm X 1700mm X 1850mm | 2400mm x 1900mm x 2100mm | |
| Weight | 2800 kg | 3000kg | |
SOUTH lathe is a professional CNC machine manufacturer of turning-milling drilling, tapping and carving combined machine tool.
Contact Us
+86 13928187729
+86 13928187729
manager@southlathe.com/ js_john@vip.163.com
No.3 Huafu Road, Bianjiaojuweihui, Ronggui town Shunde Foshan City, Guangdong Pronvice China.