loading

Leading CNC machine manufacturer of precise CNC lathe for all Industry - SOUTH Lathe

6-axis Swiss lathe with high precision  B0266A-III 1
6-axis Swiss lathe with high precision  B0266A-III 1

6-axis Swiss lathe with high precision B0266A-III

TSUGAMI B0266 model swiss type cnc lathe machine

Wide selection of Swiss type turn lathes best suited to your application

Completed BO series line-up and corresponding from 7mm to 38mm

Enhanced variation and rich options cover diversified workpieces

    oops...!

    no product data.

    Go to homepage

    Guangzhou South Lathe Machine Tools Company Limited B0266-Manual Lathe Machine, Economic CNC Lathe Machine,  Heavy Duty Flat Bed CNC Lathe Machining Center

    Main performance

    1. Working barstock diameter Ø8~Ø26 mm
    2. machining length:320mm(Direct-drive rotary guide bushing)50mm(Guide bush less)*4
    3. Main spindle drillingdiameter Ø12mm
    4. Main spindle tapping diameter M10mm
    5. Onepiece casting base and slanting bed keep good stable machine performance

    Front & back simultaneous machiningGuangzhou South Lathe Machine Tools Company Limited B0266-Manual Lathe Machine, Economic CNC Lathe Machine,  Heavy Duty Flat Bed CNC Lathe Machining Center

     

     

    Tooling zoneGuangzhou South Lathe Machine Tools Company Limited B0266-Manual Lathe Machine, Economic CNC Lathe Machine,  Heavy Duty Flat Bed CNC Lathe Machining Center

    AppearancesGuangzhou South Lathe Machine Tools Company Limited B0266-Manual Lathe Machine, Economic CNC Lathe Machine,  Heavy Duty Flat Bed CNC Lathe Machining Center

    CNC machining partsGuangzhou South Lathe Machine Tools Company Limited B0266-Manual Lathe Machine, Economic CNC Lathe Machine,  Heavy Duty Flat Bed CNC Lathe Machining Center

     

    Main Specification

    Model B0266A-III
     

     

     

     

     

    Machine capacity

    Working bar stock diameter Ø8~Ø26 mm
    Max. machining length 320mm-electrical direct driving guild bush; 90mm-rotary guide bushing;

    70mm-Guide bush less

    Main spindle hole diameter

    Ø33.6mm

    Back spindle hole diameter

    Ø32.5mm

    Max. Main spindle drilling diameter Ø14mm
    Max. Main spindle tapping diameter M14
    Max. Back spindle drilling diameter Ø13
    Max. Back spindle tapping diameter M12
    Max. spindle deep drilling diameter Ø10
    Max. Tool spindle drilling diameter

    Ø8m- front tool post; Ø10mm- Rear tool post/back tool post

    Max. Tool spindle  tapping diameter

    M6- front tool post; M8mm- Rear tool post/back tool post

    Max. Tool spindle slotting cutter dia. Ø45mm
     Machine Main spindle speed 200-10,000 r/min
    Back spindle speed 200 to 10000r/min
    Rotary guide bushing speed 200 to 10000 r/min
    Tool spindle speed 200 to 6000 r/min (option)*3 (rated speed 4800 r/min)
    Total tool storage capacity (Standard / Max. : Option) 36
    Tool size 16 mm x 16 mm 
    Rapid traverse rate 32 m/min ( X 1,Y1,Y2 :24 m/min )
    Controlled axis ( linear axes ) 6-axis

    Motor speed 

    Main spindle 3.7/5.5 KW
    Back spindle 3.7/5.5kw
    Axis X1,Y2;0.5KW Y1,Z1,X2,Z2;0.75kw
    Cross drill

    Front tool post: 1.0kW;                  Rear tool post: 1.4kW;                   Back tool post: 1.4kW

    Coolant pump 0.4 KW
    Lubricating oil pump 3 W
     

     

    Power supply and others

    Net weight 3700 kg
    Power source requirement 16.8 kVA
    Compressed air requirement 0.4 MPa or above
    Air discharge rate 100 NL/min
    Coolant tank capacity 180 L
    Width x depth x height 2630 x 1695 x 1970

     

    NC specifications

    item B0266A-IIII
    NC unit FANUC 32i-B
    Controlled axes X1, Z1, Y1,X2,Z2,C1,C2
    Least input increment 0.001 mm (X1/X2 axis in diameter)
    Least command increment X1,X2 axis 0.0005mm,other axes:0.001mm
    Maximum programmable value ±8 digits
    Interpolation method Linear , circular
    Feed rate 1 to 6,000 mm/min
    Feed rate override 0 to 150 % in 10% increments
    Dwell G04 0 to 99999.99
    ABS / INC command

    X,Y,Z ,C: absolute , U, V , W,H : Incremental

    Tool offset pairs 99
    LCD / MDI 10.4 inches color LCD
    Display language Japanese / English
    Part program storage size 64 kbyte(equivalent to 80m for each path system)
    Registerable programs 63 * sum of main and back spindle NCs
    Miscellaneous function M5-digits
    Spindle function S5-digits
    Tool function T4-digits

     

    Standard accessories

    item B0266A-III
    Automatic programming system
    Tool height compensation
    Tool life counter
    Periodic maintenance screen
    Main spindle adapter
    Back spindle adapter
    Guide bushing adapter
    Door interlock
    Coolant level detector
    Spindle cooling unit
    Standard tools
    Transit clamps
    4-hole drill bracket
    Retractable coolant nozzle
    Automatic power shut off
    Front tool post: 4-spindle cross drill
    Deep hole drill holder( φ25mm×2)
    Automatic cut-off function/Automatic facing function
    Main spindle/back spindle air purge
    Cross drill air purge
    Main spindle brake
    C-axis control for main/back spindles
    Drill holder (Single head)
    Double heads drill holder(Adjustable drill holder)
    Illumination light

     

    NC standard accessories

    Item B0266-II
    Chasing function
    Continuous thread cutting
    Manual pulse generator
    Memory card input/output interface
    Back ground editing
    Run time & parts number display
    Custom macro
    Constant surface speed control
    Spindle synchronous control (rotation/phase/tracing)
    Tool geometry/wear off set
    Programmable data input
    Chamfering & corner R
    Tool nose radius compensation
    HRV control
    Multiple repetitive cycle
    Extended program editing
    Canned drilling cycle
    Rigid tap (Main spindle, back spindle)
    Spindle speed fluctuation detection
    Cut-off detection (Speed Differential type)
    Manual handle retrace function
    Stored stroke check 2,3
    Part program storage size 64kbyte (sum of main and back spindle NCs)
    Registerable programs 63(sum of main and back spindle NCs)

     

    Options

    No. Item B0266-II
    Guide busing Stationary guide bushing
    Carrier type rotary guide bushing
    Direct-drive guide bushing
    Guide-bushing-less kit
     

     

     

    Advanced

    function system

     

    Main spindle C axis control standard
    Back spindle C axis control (Brake is optional) standard
    Spindle 1° index
    Spindle 15° index
    Main spindle brake standard
    Back spindle 15° index
    Back spindle 1° index
    Back spindle brake
    Live tool beside the back spindle
    Cross drill(Modular type:1)
    2-spindle cross drill
    3-spindle cross drill
    4-spindle cross drill standard
    High precision system

     

    0.1 μm resolution
    Coolant oil temperature controller
    X2-axis touch switch standard
     

     

    Live tools

    (Rear tool post)

     

    Rear drive
    Tool spindle
    Double face spindle
    Angular drilling head
    Thread whirling head
    Hobbing head standard
    Live tools

    (Back tool post)

     

    Back drive
    Tool spindle
    Back cross tool spindle
    Back tool adapter
    Coolant related

     

    Mist collector
    High pressure pump unit
    M code oil blow
    WAVY coolant nozzle
     

    Workpiece

    discharge system

     

    Work catcher
    Work conveyor
    Front discharge
    Rear discharge
    Chip disposal Chip conveyor
    Machine maintenance and

    monitoring functions

    Cut-off detection (Touch switch type)
    Signal indicator
     

     

     

     

    Tooling related

     

    Adapter for non-round bar (main spindle)
    Adapter for non-round bar (back spindle)
    Collect chuck with carbide lining
    Tool set gauge
    Spindle liner
    Drill holder
     

     

     

     

     

     

     

    NC functions

     

    Part program storage size 128 kbytes
    Part program storage size 256 kbytes
    Part program storage size 512 kbytes
    Part program storage size 1 Mbyte
    Number of registerabele programs expansion #1 Storage size 64 kbyte (Registerable programs: 120)
    Storage size 128 kbyte (Registerable programs: 250)
    Storage size 256 kbyte (Registerable programs: 500)
    Storage size 512 kbyte (Registerable programs: 1000)
    Direct drawing dimension program
    Variable-lead thread cutting
    Thread cutting cycle retract
    Polar coordinate interpolation
    Cylindrical interpolation
    Display language
     

     

    Safety and other

     

    Coolant flow switch
    Automatic fire extinguisher
    Illumination lamp
    Bar feeder interface
    Manual handle retrace function
    Live tool rigid tapping
    RS232C input/output interface
    Inch/metric conversion
    Abnormal load detection
    Correspondence for water soluble coolant

     

    Technical date:

    1. Operating instruction manual 1 set
    2. System appendix specification 1 set
    3. Quality testing report 1 set
    4. Packing list 1 set

     

    Machine selection guidanceGuangzhou South Lathe Machine Tools Company Limited B0266-Manual Lathe Machine, Economic CNC Lathe Machine,  Heavy Duty Flat Bed CNC Lathe Machining Center

    contact us
    Get in touch with us
    To pursuit for modern enterprise management, pursuit for customer first service, pursuit for product excellence. Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!
    Related Products
    no data

    SOUTH lathe is a professional CNC machine manufacturer of turning-milling drilling, tapping and carving combined machine tool.

     Contact Us

       +86 13928187729

      +86 13928187729

      manager@jeasoncnc.com / js_john@vip.163.com

     No.3 Huafu Road, Bianjiaojuweihui, Ronggui town Shunde Foshan City, Guangdong Pronvice China.

    no data
    Copyright © 2024 South Cnc Machine Tools Company Limited - lifisher.com | Sitemap
    Customer service
    detect