High Precision/Speed 5-axis Swiss Lathe B0265-III
Increasing the inner diameter of the main spindle does not need to cut off the end of the material to avoid waste.The main spindle oil -cooled electrical spindle, no dead ends at high speed, than ordinary wind cooling electric main shaft heat dissipation, stronger performance
Introduction
● Increasing the inner diameter of the main spindle does not need to cut off the end of the material to avoid waste.The main spindle oil -cooled electrical spindle, no dead ends at high speed, than ordinary wind cooling electric main shaft heat dissipation, stronger performance
● Optional guide bushing or guide-bush-less is available according to the work-piece.The replacement of the guide bush device can be used for multiple uses, and the length of the work piece is used for the most suitable processing.No grinding materials are required for guide-bush-less processing, and cold -pull rods can also be processed at high speed and high precision.
characteristic
Main Specification
|
Model |
B0265-III | |
| Machine capacity | Working bar stock diameter | Ø8~Ø26 mm |
| Max. Back spindle chucking diameter | Ø26 mm | |
| Max. machining length | 320mm-electrical direct driving guild bush*1; 90mm-rotary guide bushing; 70mm-Guide bush less |
|
| Main spindle hole diameter | Ø33.6mm | |
| Back spindle hole diameter | Ø32.5mm | |
| Max. Main spindle drilling diameter | Ø14mm | |
| Max. Main spindle tapping diameter | M14 | |
| Max. Back spindle drilling diameter | Ø13mm | |
| Max. Back spindle tapping diameter | M12 | |
| Max. Spindle deep drilling diameter | Ø10mm | |
| Max.Tool spindle drilling diameter | Ø8m- front tool post; Ø10mm- Rear tool post*1/back tool post*2 |
|
| Max.Tool spindle tapping diameter | M6- front tool post; M8mm- Rear tool post*1/back tool post*2 |
|
| Max. Tool spindle slotting cutter dia | Ø45mm（ front tool post) | |
|
Mechanical ability |
Main spindle speed | 200-10,000 r/min(rated speed 7,000r/min)*3 |
| Back spindle speed | 200- 10,000r/min(rated speed 7000r/min)*3*4 | |
| Rotary guide bushing speed | 200- 10,000r/min(rated speed 7,000r/min)*1*3 | |
| Tool spindle speed | 200 -6,000 r/min(rated speed 4,800r/min)*3 | |
| Total tool storage capacity (Standard / Max. : Option) | 32 | |
| Tool size | 16 mm x 16 mm | |
| Rapid traverse rate | 35 m/min ( X1,Y1:24m/min) | |
| Controlled axis ( linear axes ) | 5-axis | |
|
Motor |
Main spindle | 3.7/5.5 kW |
| Back spindle | 3.7/5.5 kW | |
| Axis | X1，Y2:0.5kW;Y1,Z1,X2,Z2:0.75kW | |
| Cross drill | Front tool post: 1.0kW; Rear tool post: 1.4kW*1 Back tool post: 1.4kW*2 |
|
| Coolant pump | 0.4 KW | |
| Lubricating oil pump | 3W | |
| Power supply and others | Net weight | 3,700 kg |
| Power source requirement | 16.8 kVA | |
| Compressed air requirement | 0.4 MPa or above | |
| Air discharge rate | 100 NL/min | |
| Coolant tank capacity | 180 L | |
| Length x Width x Height | 2,630 x 1,695 x 1,970mm | |
Note *1: Option.
Note *2: Option only for 5-axis machine.
Note *3: When exceeding the normal speed, please do not use it for a long time.
Note *4: When installing the power head on the side of the back shaft, the maximum speed of the back spindle is limited to 8,000r/min.
SOUTH lathe is a professional CNC machine manufacturer of turning-milling drilling, tapping and carving combined machine tool.
Contact Us
+86 13928187729
+86 13928187729
manager@jeasoncnc.com / js_john@vip.163.com
No.3 Huafu Road, Bianjiaojuweihui, Ronggui town Shunde Foshan City, Guangdong Pronvice China.
