As a leading CNC machine supplier, SOUTH Lathe offers a wide range of lathe machine products, include swiss lathe, heavy duty CNC lathe, CNC machining center, etc.

This lathe can rough and finish machining of internal and external cylinders, cones and other forms of rotational surfaces of ferrous metals, non-ferrous metals and non-metallic workpieces; it can turn various commonly used metric, inch, module, diameter pitch threads and multi-start threads; Carry out processing work such as drilling, reaming and oil groove broaching. It can perform large-pitch thread turning, and the spindle aperture is φ82. It is also suitable for processing large-diameter pipe parts. When the machine tool is finished, its roundness error shall not be greater than 0.01mm, its cylindricity error shall not be greater than 0.01mm on a 100mm measuring length, its surface roughness (Ra) shall not be greater than 25μm, and the accuracy of the finely turned thread specimen shall be the pitch on a length of 300mm. The error is not greater than 0.06mm; it is driven by a fast motor, and the tool holder moves vertically and horizontally, saving processing auxiliary time. The t

1.Monolithic conjoined structure of lathe bed, large span guide rail.Z direction guide rail spans 420mm,while X direction spans 230mm High rigidity,small vibration,can with stand large cutting torque,and adapt to the strong cutting and fine finishing. 2.Separate transmission is used in the main drive system(independent spindle structure,three gear automatic shift gearbox,continuously speed regulation) to eliminate the influence to the precision machining parts caused by the motor vibration and heat.and the spindle system has the advantages of low thermal deformation, good accuracy stable. 3.Main transmission adopts the way that servo motor directly driving spindle,so the spindle system has the advantages of low noise,high response speed,less thermal deformation,good accuracy stable. 4.X,Z direction guide rail are in the way of slide guide.The sliding surface of the drag board,sliding plate is plastics sticking.The low friction coefficient makes the stiffness and the dynamic and static

1. The spindle box adopts the classic manual two-gear structure, which is silent and stable; 2.The sliding surface of the machine tool guide rail is coated with plastic, and the frictional damping is small; 3.The machine tool has good processing consistency, can stably reach IT7-IT6 level accuracy, and the processing surface roughness can reach Ra1.6; 4.The overall structure of the machine tool is economical and practical, and the price is pleasant.

1.Z axis of the machine tool adopts broaden double triangle sliding rail,guide rail width 380, ball screw of axis in the middle,foots of the lathe are integral foots,ensure the machine has enough rigidity and accuracy stability. 2.Front box adopts independent spindle structure,choose servo motor drive, low noise,big cutting power.there is an optional with automatic gear shift in the spindle box,effective for heavy cutting torque. 3.Z,X guide are through hardening processing,machine adopts the automatic centralized lubrication,guide rail uses the fully closed structure,raise the service life of the machine tool largely. 4.This lathe is specially suitable for processing plates and set of parts,the accuracy of CNC lathe machining is higher than traditional flat rail one and processing high precision and good stable accuracy.

1.Reduce the number of fixtures and improve the accuracy of processing.The reduction of the number of installing chuck avoids the accumulation of errors caused by the transformation of the positioning benchmark.At the same time, most of the turning and milling composite processing equipment have the function of online detection, which can realize the reign detection and accuracy control of key data of the manufacturing process, thereby improving the processing accuracy of the product. 2.The spindle adopts precision ceramic bearings, which ensures stable cutting at high speeds, extends tool service life, and improves surface accuracy. 3. Equipped with new software to shorten the processing cycle, improve processing accuracy and improve convenience. 4.Optional 4-spindle cross drill.This device is used for drilling, tapping or milling from cross side with the combination of the main spindle indexing. The slitting cutter of φ30 mm can be mounted on the tool position T03 and T05.

1.Basic machines provide maximum profits by the minimal investment. 2.Optional direct-drive rotary guide bushing provides high speed and accurate machining. 3.Guide-bush type or guide-bush less type is selectable according to work pieces. 4.Optional modular live tool provides frontal or back off-center drilling. 5.Pursuing operability, improving machining accuracy and reducing cycle time thanks to the newly developed software. Maximum speed of the live tool is increased⇒Maximum speed of the live tool is 8,000 min-1 and reduces cycle time in small hole drilling. Adding rapid feed rate override function⇒It is possible to debug part program at actual commanded cutting feed. 10.Tool post interference prevention⇒Back spindle is positioned after retracting to a position not to interfere. (Back spindle positioning without retraction is also possible.) 6.Automatic programming system prepared as standard. 7.More rigid bed and tool post realize more improving cutting ability.