China original factory, open for visits
Cellphone/Whatsapp/Wechat: + 86 13928187729

6-axis desktop swiss lathe With Y-axis B0206TF-III 1

6-axis desktop swiss lathe With Y-axis B0206TF-III 2

6-axis desktop swiss lathe With Y-axis B0206TF-III 3

6-axis desktop swiss lathe With Y-axis B0206TF-III 4

6-axis desktop swiss lathe With Y-axis B0206TF-III

Simultaneous machining including milling such as oﬀ-center drilling, oﬀ-center tapping, end-milling, or cross drilling on back side is possible by adding Y2-axis on the back tool post.

Working bar stock diameter:

Ø3~Ø20mm

Main spindle hole diameter:

Ø32.5mm

Main spindle speed:

3.200~10,000r/min

Inquiry

Write a Review

Introduction

● Adopt TSUGAMI's proprietary chuck opening and closing structure to replace the traditional toggle and improve its true roundness

● Equipped with new software to shorten the processing cycle, improve processing accuracy and improve convenience.Maximum speed of live tool is 8000r/min and reduce cycle time in small hole drilling. Adding rapid feed rate override function is possible to debug part program at actual commanded cutting feed. Back spindle is positioned after retracting to a position not to interfere. (Back spindle positioning without retraction is also possible.)

GPYE9722

2 (2)

IMG_7120

characteristic

6-axis desktop swiss lathe With Y-axis B0206TF-III 8

The spindle adopts precision ceramic bearings, which ensures stable cutting at high speeds, extends tool service life, and improves surface accuracy.

6-axis desktop swiss lathe With Y-axis B0206TF-III 9

The processing plan is full, rich in options, and can correspond to various types of work.

6-axis desktop swiss lathe With Y-axis B0206TF-III 10

One piece casting base and slanting bed keep good stable machine performance.

Main Specification

Model		B0206TF-III
Machine capacity	Working bar stock diameter	Ø3~Ø20 mm
	Max. machining length	210mm-stationary guild; 135mm-rotary guide bushing; 170mm-electrical direct driving guild bush; 45/60-Guide bush less*2
	Main spindle hole diameter	Ø32.5mm
	Max. Main spindle drilling diameter	Ø10mm
	Max. Main spindle tapping diameter	M10mm
	Max. Back spindle chucking diameter	Ø20mm
	Max. Back spindle drilling diameter	Ø8mm
	Max. Back spindle tapping diameter	M8
	Max. Cross drilling diameter	Ø6mm(Option)
	Max. Cross tapping diameter	M5 x 0.8mm(Option)
	Max. Tool spindle slotting cutter dia.	Ø30mm(Option)
	Max. Back drilling diameter	Ø6mm(Option)
	Max. Back tapping diameter	M5(Option)
Mechanical ability	Main spindle speed	200~1,0000r/min
	Back spindle speed *4	200~1,2000r/min
	Rotary guide bushing speed	200~ 8,000r/min: carrier type rotary guide bushing; 200~10,000r/min: direct drive rotary guide bushing
	Tool spindle speed	200 to 8,000r/min (option)*1 (rated speed 7000r/min )
	Total tool storage capacity (Standard / Max. : Option)	25
	Tool size	12 mm x 12 mm x 85 mm
	Rapid traverse rate	32 m/min ( X 1:24 m/minY2:15m/min)
	Controlled axis ( linear axes )	6-axis
Motor	Main spindle	3.7/5.5 KW
	Back spindle	2.2/3.7kw
	Axis	1.0 KW (X1, X2, Y1,Y2 Z1, Z2)
	Cross drill	1.0 KW (option)
	Coolant pump	0.25 KW
	Lubricating oil pump	3 W
Power supply and others	Net weight	1,900 kg
	Power source requirement	12 kVA
	Compressed air requirement	0.4 MPa or above
	Air discharge rate	50 NL/min
	Coolant tank capacity	120 L
	Length x width x height	2,125 x 1,135 x 1,700mm

Note *1: Power head speed: When the common speed is above 7000r/min,please do not use it for a long time.

Note *2: Stationary guild, guide bushless, spindle rotary guide bushing,electrical direct driving guild bush is optional.

Note *3: Spindle rotary guide bushing,electrical direct driving guild bush is optional.

Note *4: There are restrictions depending on options such as front discharge etc.

Get in touch with us

To pursuit for modern enterprise management, pursuit for customer first service, pursuit for product excellence. Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!