Manual Lathe Machine - SOUTH Lathe

500mm swing over bed manual lathe –1000mm machining length

400mm swing over bed manual lathe –1500mm machining length

800mm swing over bed manual lathe –1000mm machining length

Manual lathe C6132D/6232D

Manual lathe –3000mm machining length CN6150B,6250B

This lathe can rough and finish machining of internal and external cylinders, cones and other forms of rotational surfaces of ferrous metals, non-ferrous metals and non-metallic workpieces; it can turn various commonly used metric, inch, module, diameter pitch threads and multi-start threads; Carry out processing work such as drilling, reaming and oil groove broaching.
It can perform large-pitch thread turning, and the spindle aperture is φ82. It is also suitable for processing large-diameter pipe parts.
When the machine tool is finished, its roundness error shall not be greater than 0.01mm, its cylindricity error shall not be greater than 0.01mm on a 100mm measuring length, its surface roughness (Ra) shall not be greater than 25μm, and the accuracy of the finely turned thread specimen shall be the pitch on a length of 300mm. The error is not greater than 0.06mm; it is driven by a fast motor, and the tool holder moves vertically and horizontally, saving processing auxiliary time. The t

500mm swing over bed saddle manual lathe –2000mm machining length

500mm swing over bed saddle manual lathe –1500mm machining length

500mm swing over bed saddle manual lathe –1000mm machining length

420mm swing over bed saddle manual lathe –3000mm machining length

420mm swing over bed saddle manual lathe –2000mm machining length

420mm swing over bed saddle manual lathe –1500mm machining length

420mm swing over bed saddle manual lathe CN6150B,6240B

This lathe can rough and finish machining of internal and external cylinders, cones and other forms of rotational surfaces of ferrous metals, non-ferrous metals and non-metallic workpieces; it can turn various commonly used metric, inch, module, diameter pitch threads and multi-start threads; Carry out processing work such as drilling, reaming and oil groove broaching.
It can perform large-pitch thread turning, and the spindle aperture is φ82. It is also suitable for processing large-diameter pipe parts.
When the machine tool is finished, its roundness error shall not be greater than 0.01mm, its cylindricity error shall not be greater than 0.01mm on a 100mm measuring length, its surface roughness (Ra) shall not be greater than 25μm, and the accuracy of the finely turned thread specimen shall be the pitch on a length of 300mm. The error is not greater than 0.06mm; it is driven by a fast motor, and the tool holder moves vertically and horizontally, saving processing auxiliary time.