5-axis Swiss lathe milling operation on back side B0205-V
1. Working bar stock diameter: Ø3~Ø20mm
2. Main spindle hole diameter: Ø32.5mm
3. Main spindle speed : 200~10,000r/min
4. 5-axis Swiss type CNC lathe
Introduction
This Swiss lathe has the following features:
●The tool holder structure is further optimized and the rigidity is increased by more
than 20%;
● The spindle clamping force has been further improved to meet heavy cutting
processing;
● The structure on the side of the secondary shaft is further strengthened to further
improve the tool life; the screw rod is thickened to 25mm;
● The X2 and Z2 axis rapid traverse speeds are increased from 32 to 36m/s, making
the efficiency higher.
Basic machines provide maximum profits by the minimal investment
Ø20mm 5-axis control
| Front & back simultaneous machining | ○ | |
| Back spindle | ○ | |
| Cross rotary tool | Option | |
| Back rotary tool | Option | |
| Guide-bush-less kit | Option | |
| Direct-drive guide bushing | Option | |
| C-axis | Option | |
| Cross rigid tap | Option | |
| Back rigid tapping | Option | |
| Number of tools | ||
| OD tool storage capacity | 9 | |
| Cross-rotary | Option | |
| Front | Fixed | 4 |
| Rotary | — | |
| Back | Fixed | 8,Option(6) |
| Rotary | Option(2) | |
| Total tool storage capacity | 21 | |
Tooling zone
Appearances
CNC machining parts
Collect chucks and guide bushing for Tsugami’s standard specification
| B0205-V | ||
| Main spindle collect chuck | 2601-1192 | |
| Back spindle collect chuck | 2601-1147 | |
| Guide bushing | Carrier type | 2621-1147 |
| Direct drive type | 2621-1226（exclusive) | |
Selection of live tool (option)
| B0205-V | |||||
| Cross drill | 2 spindles parallel(Cross drill:2,Turning(Front):3,Turning(Rear):3,Frontal drilling holder:Ø20 x 4) | 3220-Y5130 | |||
| 2 spindles shifted(Cross drill:2,Turning(Front):3,Turning(Rear):3,Frontal drilling holder:Ø20 x 4) | 3220-Y5140 | ||||
| 3 spindles (Cross drill:3,Turning(Front):2,Turning(Rear):3,Frontal drilling holder:Ø20 x 4) | 3220-Y5150 | ||||
| 4 spindles (Cross drill:4,Turning(Front):2,Turning(Rear):3,Frontal drilling holder:Ø20 x 4) | 3220-Y5160 | ||||
| Thread whirling head | Thread whirling head | (Turning(Front):2,Turning(Rear)
:4,Frontal drilling holde:-) |
3220-Y6540 | ||
| Cross: one spindle | |||||
| Front live tool | Front live tools: 3 (Modular type:1) | 3220-Y7060 | |||
| Tool spindle | In conjunction with back live tools(3220-Y7060) | 3281-T051 | |||
| Double face spindle | 3220-Y7065 | ||||
| Back live tools | Live tool on back tool post(Modular type:2 holes) | 3220-Y7070 | |||
| Double face spindle | In conjunction with back live tools(3220-Y7070) | 3220-Y7072 | |||
| Back tool adapter | 3220-Y7073 | ||||
| Back cross tool spindle | 3220-Y7074 | ||||
| Fixed tools | 2 tools | 3220-Y7070 | |||
| Y2 axis tool post | Live tools | Front : 2/Cross : 2 |
— |
||
| Fixed drill holders | 4 tools | ||||
Main Specification
| Model | B0205-V | |
|
Machine capacity |
Working bar stock diameter | Ø3~Ø20 mm |
| Max. machining length |
Guide bushless device: 45mm (package configuration), rotary guide bushing device: 80mm (package configuration)/135mm (quick matching) Electric guide bushing device: 170mm (Option) Stationary guide bushing device: 210mm (Option) |
|
| Main spindle hole diameter | Ø32.5 | |
| Max. Main spindle drilling diameter | Ø10mm | |
| Max. Main spindle tapping diameter | M10 | |
| Max. Back spindle drilling diameter | Ø8mm | |
| Max. Back spindle tapping diameter | M8 | |
| Max. Cross drilling diameter |
Ø6mm(4-axis transverse power head）/rear drive device (Option) |
|
| Max. Cross tapping diameter |
M5(4-axis transverse power head）/rear drive device (Option) |
|
| Machine | Main spindle speed | 200-10,000 r/min |
| Back spindle speed | 200 to 12000r/min | |
| Rotary guide bushing speed | 200 to 8000 r/min carrier type rotary guide bushing/ 200-10000 r/min direct drive rotary guide bushing | |
| Tool spindle speed |
4-axis transverse power head：200 to 8,000 r/min(rated speed 7,000r/min) ；rear drive：200 to 8,000 r/min(rated speed 6,400r/min) |
|
| Total tool storage capacity (Standard / Max. : Option) | 21 | |
| Tool size | 12 mm x 12 mm x 85 mm | |
| Rapid traverse rate |
36 m/min ( X 2，Z2)，32 m/min （Y1,Z1) 24 m/min (X1） |
|
|
Motor speed |
Main spindle | 2.2/3.7 KW |
| Back spindle | 2.2/3.7KW | |
| Axis | 0.5KW (X1, X2, Y1, Z1, Z2) | |
| Cross drill |
1.0 KW 4-axis transverse power head), 0.75Kw (/rear drive device (option) |
|
| Coolant pump | 0.25 KW | |
| Lubricating oil pump | 3 W | |
| Power supply and others | Net weight | 1950 kgs |
| Power source requirement | 6 kVA | |
| Compressed air requirement | 0.4 MPa or above | |
| Air discharge rate | 100 NL/min | |
| Coolant tank capacity | 120 L | |
| Width x depth x height | 2015 x 1175 x 1730mm | |
NC specifications
| item | B0205-V |
| NC unit | FANUC 0i-TD |
| Controlled axes | X1, Z1, Y1,X2,Z2 |
| Least input increment | 0.001 mm (X in diameter) |
| Least command increment | X: 0.0005 mm, other axes: 0.001 mm |
| Maximum programmable value | ±8 digits |
| Interpolation method | Linear , circular |
| Feed rate | 1 to 6,000 mm/min |
| Feed rate override | 0 to 150 % in 10% increments |
| Dwell | G04 0 to 99999.99 |
|
ABS / INC command |
X,Y,Z : absolute , U, V , W : Incremental |
| Tool offset pairs | Main : 64, back 64 ( BO073-III, BO123-III, BO203-III main only) |
| LCD / MDI | 8.4 inches color LCD |
| Display language | Japanese / English |
| Part program storage size | 1Mbyte(equivalent to 2560m tape length)*sum of main and back spindle NCs |
| Registerable programs | 800 * sum of main and back spindle NCs |
| Miscellaneous function | M5-digits |
| Spindle function | S5-digits |
| Tool function | T4-digits |
Standard accessories
| item | B0205-V |
| Automatic programming system | ○ |
| Tool height compensation | ○ |
| Tool life counter | ○ |
| Periodic maintenance screen | ○ |
| Main spindle adapter | ○ |
| Back spindle adapter | ○ |
| Guide bushing adapter | ー(B075-III standard) |
| Door interlock | ○ |
| Coolant level detector | ○ |
| Spindle cooling unit | ○ |
| Standard tools | ○ |
| Transit clamps | ○ |
| 4-hole drill bracket | ○ |
| Retractable coolant nozzle | ○ |
| Automatic power shut off | ○ |
| Front tool post: 4-spindle cross drill | ー |
| Deep hole drill holder（ φ25mm×2) | ー |
| Automatic cut-off function/Automatic facing function | ○ |
| Main spindle/back spindle air purge | ー |
| Cross drill air purge | ー |
| Main spindle brake | ー |
| C-axis control for main/back spindles | ー |
| Drill holder (Single head) | ○（7） |
| Double heads drill holder（Adjustable drill holder） | ○（1） |
| Illumination light | ○ |
NC standard accessories
| Item | B0205-V |
| Chasing function | ○ |
| Continuous thread cutting | ○ |
| Manual pulse generator | ○ |
| Memory card input/output interface | ○ |
| Back ground editing | ○ |
| Run time & parts number display | ○ |
| Custom macro | ○ |
| Constant surface speed control | ○ |
| Spindle synchronous control (rotation/phase/tracing) | ○ |
| Tool geometry/wear off set | ○ |
| Programmable data input | ○ |
| Chamfering & corner R | ○ |
| Tool nose radius compensation | ○ |
| ＨＲＶ control | ○ |
| Multiple repetitive cycle | ○ |
| Extended program editing | ○ |
| Canned drilling cycle | ○ |
| Rigid tap (Main spindle, back spindle) | ○ |
| Spindle speed fluctuation detection | ○ |
| Cut-off detection (Speed Differential type) | ○ |
| Manual handle retrace function | ー |
| Stored stroke check 2,3 | ー |
| Part program storage size | 1Mbyte (sum of main and back spindle NCs) |
| Registerable programs | 800(sum of main and back spindle NCs) |
Options
| No. | Item | B0205-V | |
| Guide busing | Stationary guide bushing | ○ | |
| Carrier type rotary guide bushing | ○ | ||
| Direct-drive guide bushing | ○＊6 | ||
| Guide-bushing-less kit | ○ | ||
|
Advanced function system
|
Main spindle C axis control | ○ | |
| Back spindle C axis control (Brake is optional) | ○＊1 | ||
| Spindle 1° index | ○ | ||
| Spindle 15° index | ○ | ||
| Main spindle brake | ○ | ||
| Back spindle 15° index | ○＊1 | ||
| Back spindle 1° index | ○＊1 | ||
| Back spindle brake | ○＊1 | ||
| Live tool beside the back spindle | ー | ||
| Cross drill（Modular type:1） | ○ | ||
| 2-spindle cross drill | ○ | ||
| 3-spindle cross drill | ○ | ||
| 4-spindle cross drill | ○ | ||
| High precision system
|
0.1 μm resolution | ○ | |
| Coolant oil temperature controller | ○ | ||
| X2-axis touch switch | ○＊3 | ||
|
Live tools (Rear tool post)
|
Rear drive | ー | |
| Tool spindle | ー | ||
| Double face spindle | ー | ||
| Angular drilling head | ー | ||
| Thread whirling head | ー | ||
| Hobbing head | ー | ||
| Live tools
(Back tool post)
|
Back drive | ○＊3 | |
| Tool spindle | ○＊3 | ||
| Back cross tool spindle | ○＊3 | ||
| Back tool adapter | ○＊3 | ||
| Coolant related
|
Mist collector | ○ | |
| High pressure pump unit | ○ | ||
| M code oil blow | ○ | ||
| WAVY coolant nozzle | ○ | ||
|
Workpiece discharge system
|
Work catcher | ○＊2 | |
| Work conveyor | ○＊1 | ||
| Front discharge | ○＊1 | ||
| Rear discharge | ○＊1 | ||
| Chip disposal | Chip conveyor | ○＊1 | |
| Machine maintenance and
monitoring functions |
Cut-off detection (Touch switch type) | ○ | |
| Signal indicator | ○ | ||
|
Tooling related
|
Adapter for non-round bar (main spindle) | ○ | |
| Adapter for non-round bar (back spindle) | ○＊1 | ||
| Collect chuck with carbide lining | ○ | ||
| Tool set gauge | ○ | ||
| Spindle liner | ○ | ||
| Drill holder | standard | ||
|
NC functions
|
Part program storage size 128 kbytes | ー | |
| Part program storage size 256 kbytes | ー | ||
| Part program storage size 512 kbytes | ー | ||
| Part program storage size 1 Mbyte | ー | ||
| Number of registerabele programs expansion #1 | Storage size 64 kbyte (Registerable programs: 120) | ー | |
| Storage size 128 kbyte (Registerable programs: 250) | ー | ||
| Storage size 256 kbyte (Registerable programs: 500) | ー | ||
| Storage size 512 kbyte (Registerable programs: 1000) | ー | ||
| Direct drawing dimension program | standard | ||
| Variable-lead thread cutting | standard | ||
| Thread cutting cycle retract | standard | ||
| Polar coordinate interpolation | standard＊5 | ||
| Cylindrical interpolation | standard＊5 | ||
| Display language | ○ | ||
|
Safety and other
|
Coolant flow switch | ○ | |
| Automatic fire extinguisher | ○ | ||
| Illumination lamp | standard | ||
| Bar feeder interface | ○ | ||
| Manual handle retrace function | ○＊6 | ||
| Live tool rigid tapping | ○ | ||
| RS232C input/output interface | ○ | ||
| Inch/metric conversion | ○ | ||
| Abnormal load detection | ○ | ||
| Correspondence for water soluble coolant | ○ | ||
Technical date:
| 1. | Operating instruction manual | 1 set |
| 2. | System appendix specification | 1 set |
| 3. | Quality testing report | 1 set |
| 4. | Packing list | 1 set |
Machine selection guidance
SOUTH lathe is a professional CNC machine manufacturer of turning-milling drilling, tapping and carving combined machine tool.
Contact Us
+86 13928187729
+86 13928187729
manager@southlathe.com/ js_john@vip.163.com
No.3 Huafu Road, Bianjiaojuweihui, Ronggui town Shunde Foshan City, Guangdong Pronvice China.