1. The spindle box adopts the classic manual two-gear structure, which is silent and stable;
2.The sliding surface of the machine tool guide rail is coated with plastic, and the frictional damping is small;
3.The machine tool has good processing consistency, can stably reach IT7-IT6 level accuracy, and the processing surface roughness can reach Ra1.6;
4.The overall structure of the machine tool is economical and practical, and the price is pleasant.

1.Max.swing diam. Over lathe 500mm.

2.Max. length of the work piece:1000mm,1500mm,2000mm.

3.Guide span: 420mm.

4.Height of the center 265mm.

This lathe can rough and finish machining of internal and external cylinders, cones and other forms of rotational surfaces of ferrous metals, non-ferrous metals and non-metallic workpieces; it can turn various commonly used metric, inch, module, diameter pitch threads and multi-start threads; Carry out processing work such as drilling, reaming and oil groove broaching.
It can perform large-pitch thread turning, and the spindle aperture is φ82. It is also suitable for processing large-diameter pipe parts.
When the machine tool is finished, its roundness error shall not be greater than 0.01mm, its cylindricity error shall not be greater than 0.01mm on a 100mm measuring length, its surface roughness (Ra) shall not be greater than 25μm, and the accuracy of the finely turned thread specimen shall be the pitch on a length of 300mm. The error is not greater than 0.06mm; it is driven by a fast motor, and the tool holder moves vertically and horizontally, saving processing auxiliary time. The t

This lathe can rough and finish machining of internal and external cylinders, cones and other forms of rotational surfaces of ferrous metals, non-ferrous metals and non-metallic workpieces; it can turn various commonly used metric, inch, module, diameter pitch threads and multi-start threads; Carry out processing work such as drilling, reaming and oil groove broaching.
It can perform large-pitch thread turning, and the spindle aperture is φ82. It is also suitable for processing large-diameter pipe parts.
When the machine tool is finished, its roundness error shall not be greater than 0.01mm, its cylindricity error shall not be greater than 0.01mm on a 100mm measuring length, its surface roughness (Ra) shall not be greater than 25μm, and the accuracy of the finely turned thread specimen shall be the pitch on a length of 300mm. The error is not greater than 0.06mm; it is driven by a fast motor, and the tool holder moves vertically and horizontally, saving processing auxiliary time.

Simple I/0 manual, can be connected with NC and CNC machine

Our static tool holders are individually designed for each turning center and manufactured with the highest precision so that you are able to use the full capacity of your machine.

This machine is a light reinforced forming machine. The maximum processing length is 350mm and the through hole diameter is 46mm. It is a horizontal lathe.

It is mainly used for turning the outer circle, inner circle, end face, taper, and grooving of various parts, as well as metric threads, inch threads, module threads, and radial pitch threads. The saddle lathe is a variant of the horizontal lathe and is suitable for processing larger diameter disc parts. The lathe has a wide working range, high rotation speed and strong rigidity. It is suitable for high-speed and powerful cutting of various ferrous and non-ferrous metals using carbide.

The machine is especially suitable for processing small axis, tube and sleeve parts, with high speed and precision, good finish, stable size consistency, etc.