Gang type cnc lathe machine J46+2, J52+2, J76+2
Main performance
• Swing over lathe diameter 400mm
• Max. turning length 380mm
• Maximum turning diameter 160mm
• Taiwan SYNTEC controller
• It can be equipped with turrets, fly cutter heads, power heads, etc. The power head can be selected to be oscillating, with any oscillation angle from 0° to 90°, to realize integrated turning and milling machining.
• Enlarged tool holder for improved rigidity
• Suitable for machining materials such as stainless steel, titanium alloys, and carbon steel
• The integral casting undergoes aging processes such as annealing and vibration to ensure long-term stability during machining and extend the service life of the machine tool.
• Swing over lathe diameter 400mm
• Max. turning length 380mm
• Maximum turning diameter 160mm
• Taiwan SYNTEC controller
• It can be equipped with turrets, fly cutter heads, power heads, etc. The power head can be selected to be oscillating, with any oscillation angle from 0° to 90°, to realize integrated turning and milling machining.
• Enlarged tool holder for improved rigidity
• Suitable for machining materials such as stainless steel, titanium alloys, and carbon steel
• The integral casting undergoes aging processes such as annealing and vibration to ensure long-term stability during machining and extend the service life of the machine tool.
5.0
design customization
Please fill out the form below to request a quote or to request more information about us. Please be sure to upload customized requirement documents or pictures, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Machine detail
11 (6)
8 (4)
6 (5)
Main Specification
| Model of lathe | J46+2 | J52+2 | J76+2 | |
| Machining capacity | Max. swing diam. over lathe | Ø400mm | Ø400mm | Ø400mm |
| Maximum turning diameter | Ø160mm | Ø160mm | Ø160mm | |
| Max. turning length | 380mm | 380mm | 380mm | |
| Main Spindle | Spindle center height from ground | 1080mm | 1080mm | 1080mm |
| Spindle nose | A2-5 | A2-6 | A2-8 | |
| Spindle bore diameter | Ø56mm | Ø66mm | Ø86mm | |
| Maximum bar material diameter | Ø45mm | Ø51mm | Ø72mm | |
| Maximum spindle speed | Max.4500r/min | Max.4000r/min | Max.2000r/min | |
| Spindle motor power/torque | 7.5KW/47 N.m | 11KW/72 N.m | 15KW/143 N.m | |
| Servo Turret | Servo turret MK-63RSV-8T | Optional | Optional | Optional |
| X/Z/Y axis feeding | Maximum fast travel speed | 24m/min | 24m/min | |
| X/Z/Y-axis motor power/torque | Yaskawa 1.3kW/8.34Nm | Yaskawa 1.3kW/8.34Nm | Yaskawa 1.3kW/8.34Nm | |
| Or SYNTEC 1.8kW/11.5Nm | Or SYNTEC 1.8kW/11.5Nm | Or SYNTEC 1.8kW/11.5Nm | ||
| X/Z-axis C3-grade ball screws | 32/32 | 32/32 | 32/32 | |
| X/Z-axis roller guide rails | 35/35 | 35/35 | 35/35 | |
| X-axis maximum travel | 1000mm | 1000mm | 1000mm | |
| Z-axis maximum travel | 400mm | 400mm | 400mm | |
| Equipment specifications | Machine net weight | 2600 kg | 2700 kg | 2800 kg |
| Total machine power | 11.5 KW | 15 KW | 19 KW | |
| Machine L x W x H | 2100x1580x1800 | 2100x1580x1800 | 2100x1580x1800 | |
Optional items
| Configuration item | J46+2, J52+2, J76+2 | |
| Spindle | Mechanical spindle | ● |
| Electric spindle | ○ | |
| Control system | SYNTEC CNC system | ● |
| FANUC CNC system | ○ | |
| Feed axis | Yaskawa | ● |
| SYNTEC | ○ | |
| Clamping | Back-pull chuck | ● |
| Push-up chuck | ○ | |
| Chuck | ○ | |
| Auxiliary equipment | Parts collect device | ○ |
| Feeding device | ○ | |
| Chip conveyor | ○ | |
| Automated robot | ○ | |
| Oil mist separator | ○ | |
Standard ● Optional ○
Machine tool accuracy
| Main inspection items | Detection method | Factory Standards |
| X-axis repeated positioning | Checking the X-Axis Re-position accuracy | ±0.003 |
| Note: Perform a preliminary run approximately 50 times to offset errors from cooling and warming up, then test the Re-position accuracy | ||
| Z axis repeated positioning | Checking the Z-Axis Fixed-Point Re-position accuracy | ±0.003 |
| Note: Perform a preliminary run approximately 50 times to offset errors from cooling and warming up, then test the Re-position accuracy | ||
| If the customer wants to test the ISO or VDI accuracy of the X/Z/Y axis, it must be determined when writing the contract. The customer must also test this item during the initial acceptance at the Jingfusi factory. | ||
Main configuration
| Name | Brand |
| NC System | Taiwan SYNTEC 22TA system, crystal panel, 10.4-inch screen. |
| X/Z axis servo | Japan YASKAWAI or Taiwan SYNTEC |
| Spindle | Taiwan-made Posa spindle (Or custom-made Jingfusi tail-mounted direct-drive electric spindle for an additional 3, 000 yuan). The 76 series machine generally uses the original Taiwanese Chien Chun A2-8 spindle (the Pusen A2-8 spindle for the 76 series machine is generally not in stock). |
| Fully closed-loop indexing | Taiwan produces SYNTEC magnetic ring encoder |
| Spindle Motor | Taiwan SYNTEC |
| X/Z axis screw | Taiwan-made PMI or Hiwin C3-grade futures-ground lead screw with double nut. One end has a blind thread. |
| X/Z axis guide rails | Taiwan-made PMI or Hiwin P-grade roller guide rails with extended slides for increased load capacity and enhanced rigidity. |
| Lubrication System | Japan HERG lubricating oil pump (joint venture). |
| Electrical Components | German-made Schneider electrics. |
| Hydraulic Station | Customized hydraulic station. User-provided 46# genuine Great Wall anti-wear hydraulic oil. |
| Cast Iron One-Piece Bed | In-house development. |
| Power head | Radial ER25 power 2-end, (long and short shaft heads) |
| Includes New Features | SYNTEC system G174 (CNC lathe slot) V01. |
| Includes New Features | SYNTEC system G183 (face drilling cycle) V01. |
| Post-Processing File | Provide complete Mastercam2022/2021/2017/ X9/ X6 computer software turning and milling compound programming post-processing files to Party A |
Machine tool accessories list
(The following accessories are included in a single device)
| No. | Contents | Specification | Unit | Remark |
| 1 | Power head ER25 collet | 1set | Installed in accessory box or on turret | |
| 2 | Power head wrench | 2set | Packed in accessory box | |
| 3 | Spring chuck | One piece as standard | 1set | Optional specifications |
| 4 | Machine pad | 8set | ||
| 5 | Foot switch | 4 pcs | ||
| 6 | Hexagon wrench | 1set | Packed in accessory box | |
| 7 | Machine tool maintenance and repair manual | Includes M code, G code, circuit diagram | １PCS | |
| 8 | SYNTEC user manual | USB flash drive | 1 pcs | Packed in accessory box |
| 9 | Turret manual | 1 copy | Packed in accessory box | |
| 10 | Servo drive manual | 1 copy | Packed in accessory box |
{{item.score}} Stars
{{item.pre}}%
{{item.nickname ? (item.nickname.slice(0, 2) + '*****') : item.source === 1 ? 'mall buyer' : '--'}}
{{item.comment_time}}
Review in the {{item.country}}
{{itemAttr.params_key}}: {{itemAttr.params_value}}
contact us
Get in touch with us
To pursuit for modern enterprise management, pursuit for customer first service, pursuit for product excellence. Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!
SOUTH lathe is a professional CNC machine manufacturer of turning-milling drilling, tapping and carving combined machine tool.
Contact Us
+86 13928187729
+86 13928187729
manager@southlathe.com/ js_john@vip.163.com
No.3 Huafu Road, Bianjiaojuweihui, Ronggui town Shunde Foshan City, Guangdong Pronvice China.
Copyright © 2026 South Cnc Machine Tools Company Limited - southlathe.com | Sitemap