cnc lathe machining center J46Y+4,J52Y+4
Main performance
• Swing over lathe diameter 480mm
• Max. turning length 320mm
• One piece casting base and slanting bed keep good stable machine performance
• Taiwan SYNTEC controller
• This machine tool offers faster speed, higher precision, and better surface finish for machining small to medium-sized parts compared to a power turret.
• The power head comes standard with a 65mm wheelbase and is a pluggable type, facilitating power head or bearing replacement and simplifying maintenance,The machine has good performance high precision, low noise, new style, etc
• Significantly reducing after-sales costs.
• The milling and turning functions can machine complex materials such as stainless steel, titanium alloys, and carbon steel.
• The integral casting undergoes annealing, vibration time, and other aging processes to ensure long-term stability and extend the machine tool's lifespan.
• Swing over lathe diameter 480mm
• Max. turning length 320mm
• One piece casting base and slanting bed keep good stable machine performance
• Taiwan SYNTEC controller
• This machine tool offers faster speed, higher precision, and better surface finish for machining small to medium-sized parts compared to a power turret.
• The power head comes standard with a 65mm wheelbase and is a pluggable type, facilitating power head or bearing replacement and simplifying maintenance,The machine has good performance high precision, low noise, new style, etc
• Significantly reducing after-sales costs.
• The milling and turning functions can machine complex materials such as stainless steel, titanium alloys, and carbon steel.
• The integral casting undergoes annealing, vibration time, and other aging processes to ensure long-term stability and extend the machine tool's lifespan.
5.0
design customization
Please fill out the form below to request a quote or to request more information about us. Please be sure to upload customized requirement documents or pictures, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Machine detail
b1 (14)
b2 (14)
b3 (13)
Main Specification
| Model of lathe | J46Y+4 | J52Y+4 | |
| Machining capacity | Max. swing diam. over lathe | Ø480mm | Ø480mm |
| Maximum turning diameter | Ø80mm | Ø80mm | |
| Max. turning length | 320mm | 320mm | |
| Main Spindle ( electrical motor spindle) | Spindle center height from ground | 1150mm | 1150mm |
| Spindle nose | A2-5 | A2-6 | |
| Spindle bore diameter | Ø56mm | Ø66mm | |
| Maximum bar material diameter | Ø45mm | Ø51mm | |
| Maximum spindle speed | 4500r/min | 4000r/min | |
| Spindle motor power/torque | 7.5KW/47 N.m | 11KW/72N.m | |
| Power turret | Power head assembly model | diameter 4 | diameter 4 |
| Power head motor | SYNTEC 1.7 kW/8.34 Nm | SYNTEC 1.7 kW/8.34 Nm | |
| Distance between adjacent living tools | 65mm | 65mm | |
| Maximum power head speed | 5000 r/min | 5000 r/min | |
| Tool support type | ER25 | ER25 | |
| Servo Turret | Servo turret model | -- | -- |
| X/Z/Y axis feeding | Maximum fast travel speed | 24m/min | 24m/min |
| X/Z-axis motor power/torque | Yaskawa 1.3kW/8.34Nm or SYNTEC 1.8kw/11.5 | Yaskawa 1.3kW/8.34Nm or SYNTEC 1.8kw/11.5 | |
| Y-axis motor power/torque | Yaskawa 0.85kW/5.39Nm or SYNTEC 1.7kw/5.4 | Yaskawa 0.85kW/5.39Nm or SYNTEC 1.7kw/5.4 | |
| X/Z/Y-axis C3-grade ball screws | 32/32/25 | 32/32/25 | |
| X/Z/Y-axis roller guide rails | 35/35/25 | 35/35/25 | |
| X-axis maximum travel | 800mm | 800mm | |
| Z-axis maximum travel | 470mm | 470mm | |
| Y-axis maximum travel | 190mm | 190mm | |
| Axial power head through the spindle center | 70mm | 70mm | |
| Equipment specifications | Machine net weight | 2900 kg | 2900 kg |
| Total machine power | 10 KW | 13.5 KW | |
| Machine L x W x H | 2200x1580x1900 | 2200x1580x1900 | |
Optional items
| Configuration item | J46Y+4,J52Y+4 | |
| Spindle | Mechanical spindle | ● |
| Electric spindle | ○ | |
| Control system | SYNTEC CNC system | ● |
| FANUC CNC system | ○ | |
| Feed axis | Yaskawa | ● |
| SYNTEC | ○ | |
| Turret | Back-pull chuck | ● |
| Push-up chuck | ○ | |
| Chuck | ○ | |
| Clamping | 8 workstations | ● |
| 12 workstations | ○ | |
| Auxiliary equipment | Parts collect device | ○ |
| Feeding device | ○ | |
| Chip conveyor | ○ | |
| Automated robot | ○ | |
| Oil mist separator | ○ | |
Standard ● Optional ○
Machine tool accuracy
| Main inspection items | Detection method | Factory Standards |
| X-axis repeated positioning | Checking the X-Axis Re-position accuracy Note: Perform a preliminary run approximately 50 times to offset errors from cooling and warming up, then test the Re-position accuracy |
±0.003 |
| Z1 axis repeated positioning | Checking the Z-Axis Fixed-Point Re-position accuracy Note: Perform a preliminary run approximately 50 times to offset errors from cooling and warming up, then test the Re-position accuracy |
±0.003 |
| Y-axis repeated positioning | Checking the Y-Axis Fixed-Point Re-position accuracy Note: Perform a preliminary run approximately 50 times to offset errors from cooling and warming up, then test the Re-position accuracy |
±0.004 |
| If the customer wants to test the ISO or VDI accuracy of the X/Z/Y axis, it must be determined when writing the contract. The customer must also test this item during the initial acceptance at the factory. | ||
Main configuration
| #005dc4 | Brand |
| NC System | Taiwan SYNTEC 22TB system, crystal panel |
| X/Z axis servo | Japan YASKAWAI or Taiwan SYNTEC |
| Spindle | Taiwan-made POSA spindle (or custom-made Jingfusi tail-mounted direct-drive electric spindle for an additional 3,000 yuan). |
| Fully closed-loop indexing | Taiwan produces SYNTEC magnetic ring encoder |
| Spindle Motor | Taiwan SYNTEC |
| X/Z/Y axis screw | Taiwan-made PMI or Hiwin C3-grade futures-ground lead screw with double nut. One end has a blind thread. |
| X/Z/Y axis guide rails | Taiwan-made PMI or Hiwin P-grade roller guide rails with extended slides for increased load capacity and enhanced rigidity. |
| Lubrication System | Japanese HERG lubricating oil pump (joint venture).。 |
| Electrical Components | German-made Schneider electrics. |
| Hydraulic Station | Customized hydraulic station. User-provided 46# genuine Great Wall anti-wear hydraulic oil. |
| Cast Iron One-Piece Bed | In-house development. |
| Oil Cooler | Constant temperature oil cooler. |
| Includes New Features | SYNTEC system G174 (CNC lathe slot) V01. |
| Includes New Features | SYNTEC system G183 (face drilling cycle) V01. |
| Post-Processing File | Provide complete Mastercam2022/2021/2017/ X9/ X6 computer software turning and milling compound programming post-processing files to Party A |
Machine tool accessories list
(the following accessories are included in a single device)
| No. | Contents | Specification | Unit | Remark |
| 1 | Spring chuck | One piece as standard, optional specifications | 1set | Installed in the accessory box or on the spindle end face of the machine tool |
| 2 | ER25 collet for power unit | 2 set | Packed in accessory box | |
| 3 | Power unit wrench | 2set | ||
| 4 | Hexagonal wrench | 1Set | ||
| 5 | Machine tool maintenance and repair manual | Includes M code, G code, circuit diagram | １PCS | |
| 6 | SYNTEC user manual | USB flash drive | 1 pcs | Packed in accessory box |
| 7 | Servo drive manual | 1 copy | Packed in accessory box |
{{item.score}} Stars
{{item.pre}}%
{{item.nickname ? (item.nickname.slice(0, 2) + '*****') : item.source === 1 ? 'mall buyer' : '--'}}
{{item.comment_time}}
Review in the {{item.country}}
{{itemAttr.params_key}}: {{itemAttr.params_value}}
contact us
Get in touch with us
To pursuit for modern enterprise management, pursuit for customer first service, pursuit for product excellence. Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!
Related Products
SOUTH lathe is a professional CNC machine manufacturer of turning-milling drilling, tapping and carving combined machine tool.
Contact Us
+86 13928187729
+86 13928187729
manager@southlathe.com/ js_john@vip.163.com
No.3 Huafu Road, Bianjiaojuweihui, Ronggui town Shunde Foshan City, Guangdong Pronvice China.
Copyright © 2026 South Cnc Machine Tools Company Limited - southlathe.com | Sitemap