China original factory, open for visits
Cellphone/Whatsapp/Wechat: + 86 13928187729

cnc lathe machining center J46-46S,J36-36S,J25-25S

Main performance
• Swing over lathe diameter 500mm
• Max. turning length 220mm
• Taiwan SYNTEC controller
• Twin-spindle machine tools are highly efficient and suitable for mass production.The machine has good performance high precision, low noise, new style, etc
• A vertical axis makes chip removal easier and reduces manual labor.
• Machinable materials include stainless steel, titanium alloys, and carbon steel.
• The integral casting undergoes aging processes such as annealing and vibration to ensure long-term stability during machining and extend the service life of the machine tool.

Inquiry

Write a Review

Machine detail

b1 (21)

Main performance

• Programming vertical Y is easier than programming interpolated Y

• The 0° power head can reach 8000 RPM under normal use, and the 90° power head can reach 6500 RPM under normal use

• The gearless module transmission within the turret eliminates the heat source and ensures machining accuracy

• The milling and turning function can process complex materials such as stainless steel, titanium alloy, and carbon steel

• Chip removal method: Side chip removal and rear chip removal are integrated, allowing for arbitrary installation

• The integral casting undergoes aging processes such as annealing and vibration to ensure long-term stability during machining and extend the service life of the machine tool

b1 (9)

Main Specification

Model of lathe		unit	J46-46S	J36-36S	J25-25S
Machining capacity	Max. swing diameter over lathe	mm	Ø500	Ø500	Ø500
	Max. Swing Diameter Over Cross Slide	mm	Ø170	Ø170	Ø170
	Maximum turning diameter	mm	Ø360	Ø360	Ø360
	Max. turning length	mm	220	220	220
Main Spindle	Spindle center height from ground	mm	1150	1150	1150
	Spindle nose	-	A2-5	A2-4	A2-4
	Spindle bore diameter	mm	Ø56	Ø43	Ø38
	Maximum bar material diameter	mm	Ø45	Ø35	Ø27
	Maximum spindle speed	r/min	4500	7000	8000
	Spindle motor power/torque	Kw / N.m	7.5KW/47 N.m	5.5KW/35N.m	3.7KW/23 N.m
Sub-spindle	Sub-spindle nose	-	A2-5	A2-4	A2-4
	Sub-spindle bore diameter	mm	Ø56	Ø43	Ø38
	Maximum bar material diameter	mm	Ø45	Ø35	Ø27
	Maximum Sub-spindle speed	r/min	4500	7000	8000
	Sub-spindle motor power/torque	Kw / N.m	7.5KW/47 N.m	7.5KW/29 N.m	5.5KW/22 N.m
X1/Z1/X2/Z2 axis feeding	Maximum fast travel speed	m/min	22	22	22
	X1/Z1/X2/Z2-axis motor power/torque	Kw / N.m	SYNTEC 1.8KW/ 11.5N.m	SYNTEC 1.8KW/ 11.5N.m	SYNTEC 1.8KW/ 11.5N.m
	X1/Z1/X2/Z2-Axis Ball Screws	-	32/32/32/32	32/32/32/32	32/32/32/32
	X1/Z1/X2/Z2-Axis Roller Linear Guides	-	35/35/35/35	35/35/35/35	35/35/35/35
	X1/X2-axis maximum travel	mm	1050/1050	1050/1050	1050/1050
	X1/X2-axis maximum travel	mm	380/380	380/380	380/380
Equipment specifications	Machine net weight	kg	4500	4400	4300
	Total machine power	KW	18	17	16
	Machine L x W x H	mm	2200x1700x1600	2200x1700x1600	2200x1700x1600

Optional items

Configuration item		,J46-46S,J36-36S,J25-25S
Main Spindle	Mechanical spindle	○
Main Spindle	Electric spindle	●
counter system	SYNTEC controller	●
	FANUC controller	○
Feed axis	Yaskawa	●
	SYNTEC	●
	Push-up chuck	●
	Chuck	○
Auxiliary equipment	Parts collect device	○
	Feeding device	○
	Chip conveyor	○
	Automated robot	○
	Oil mist separator	○

Standard ● Optional ○

Machine tool accuracy

Main inspection items	Detection method	Factory Standards
X-axis repeated positioning	Checking the X-Axis Re-position accuracy Note: Perform a preliminary run approximately 50 times to offset errors from cooling and warming up, then test the Re-position accuracy	±0.003
Z axis repeated positioning	Checking the Z-Axis Fixed-Point Re-position accuracy Note: Perform a preliminary run approximately 50 times to offset errors from cooling and warming up, then test the Re-position accuracy	±0.003
If the customer wants to test the ISO or VDI accuracy of the X/Z/Y axis, it must be determined when writing the contract. The customer must also test this item during the initial acceptance at the Jingfusi factory.

Main configuration

Name	Brand
NC System	Taiwan SYNTEC 22TB system
X/Z-axis Servo	Japan YASKAWA or Taiwan SYNTEC
Spindle	Taiwan-made POSA spindle (or custom-made Jingfusi tail-mounted direct-drive electric spindle for an additional 3,000 yuan).
Spindle Motor	Taiwan SYNTEC or Beijing CTB
X/Z Screws	Taiwan-made HIWIN or PMI
X/Z Linear Guides	Taiwan-made HIWIN or PMI
Power Head Motor	Taiwan SYNTEC motor
Lubrication System	Japan HERG lubrication pump (joint venture).
Electrical Components	German-made Schneider electrics.
Hydraulic Station	Customized hydraulic station. User-provided 46# genuine Great Wall anti-wear hydraulic oil.
Cast Iron One-Piece Bed	In-house development.
Includes New Features	SYNTEC System G183 (Face Drilling Cycle) V01

Get in touch with us

To pursuit for modern enterprise management, pursuit for customer first service, pursuit for product excellence. Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!

input must not exceed 280 in length!

name

Please enter a valid email address!

input must not exceed 280 in length!

textarea must not exceed 65530 in length!

content