China original factory, open for visits
Cellphone/Whatsapp/Wechat: + 86 13928187729

CNC lathe machining center J46-36S, J36-36S, J25-25S 90° dual-spindle CNC lathe 1

CNC lathe machining center J46-36S, J36-36S, J25-25S 90° dual-spindle CNC lathe 2

CNC lathe machining center J46-36S, J36-36S, J25-25S 90° dual-spindle CNC lathe 3

CNC lathe machining center J46-36S, J36-36S, J25-25S 90° dual-spindle CNC lathe 4

CNC lathe machining center J46-36S, J36-36S, J25-25S 90° dual-spindle CNC lathe

Advantages

Primarily focused on bar stock processing, with pellet processing as a secondary function.

Main performance
• Swing over lathe diameter 400mm
• Max. turning length 380mm
• One piece casting base and slanting bed keep good stable machine performance
• Taiwan SYNTEC controller
• Twin-spindle machine tools are highly efficient and suitable for mass production.
• A vertical axis makes chip removal easier and reduces manual labor.
• Machinable materials include stainless steel, titanium alloys, and carbon steel.
• The integral casting undergoes aging processes such as annealing and vibration to ensure long-term stability during machining and extend the service life of the machine tool.

Inquiry

Write a Review

Machine detail

5 - 副本 (2)

图片 2 (2)

Main Specification

Model of lathe		unit	J46-36S	J36-36S	J25-25S
Machining capacity	Max. swing diameter over lathe	mm	Ø400	Ø400	Ø400
	Maximum turning diameter	mm	Ø160	Ø160	Ø160
	Max. turning length	mm	380	380	380
	Spindle center height from ground	mm	1080	1080	1080
	Spindle nose	-	A2-4	A2-4	A2-4
	Spindle bore diameter	mm	Ø56	Ø43	Ø38
	Maximum bar material diameter	mm	Ø45	Ø35	Ø27
	Maximum spindle speed	r/min	4500	7000	8000
	Spindle motor power/torque	Kw / N.m	7.5KW/47 N.m	5.5KW/35N.m	3.7KW/23 N.m
Auxiliary Spindle	Subspindle end specifications		A2-4	A2-4	A2-4
	Subspindle inner diameter bore	mm	Ø56	Ø43	Ø38
	Maximum passable bar stock	mm	Ø35	Ø35	Ø27
	Maximum set speed of subspindle	r/min	7000	7000	8000
	Subspindle motor power/torque	Kw / N.m	7.5KW/29Nm	5.5KW/29Nm	5.5KW/22Nm
X/Z/Y axis feeding	Maximum fast travel speed	m/min	24	24	24
	X/Z/X1/Z2-axis motor power/torque	Kw / N.m	SYNTEC 2.4KW / 11.5Nm	SYNTEC 2.4KW / 11.5Nm	SYNTEC 2.4KW / 11.5Nm
	X/Z/X1/Z2-axis C3-grade ball screws	-	32/32/32/32	32/32/32/32	32/32/32/32
	X/Z/X1/Z1-axis roller guide rails	-	35/35/35/35	32/32/32/32	32/32/32/32
	X1-axis maximum travel	mm	400	400	400
	Z1-axis maximum travel	mm	230	400	400
	X2-axis maximum travel		320	400	400
	Z2-axis maximum travel	mm	260	260	260
Equipment specifications	Machine net weight	kg	3800	3700	3600
	Total machine power	KW	20	19	18
	Machine L x W x H	mm	2200x1700x1790	2200x1700x1790	2200x1700x1790

Optional items

Configuration item		J46-36S, J36-36S, J25-25S
Main Spindle	Mechanical spindle	○
Main Spindle	Electric spindle	●
counter system	SYNTEC controller	●
	FANUC controller	○
Feed axis	Yaskawa	●
Feed axis	SYNTEC	●
Clamping	Push-up chuck	●
Clamping	Chuck	○
Auxiliary equipment	Parts collect device	○
	Feeding device	○
	Chip conveyor	○
	Automated robot	○
	Oil mist separator	○

Standard ● Optional ○

Machine tool accuracy

Main inspection items	Detection method	Factory Standards
X-axis repeated positioning	Checking the X-Axis Re-position accuracy Note: Perform a preliminary run approximately 50 times to offset errors from cooling and warming up, then test the Re-position accuracy	±0.003

Z1 axis repeated positioning	Checking the Z-Axis Fixed-Point Re-position accuracy Note: Perform a preliminary run approximately 50 times to offset errors from cooling and warming up, then test the Re-position accuracy	±0.003

If the customer wants to test the ISO or VDI accuracy of the X/Z/Y axis, it must be determined when writing the contract. The customer must also test this item during the initial acceptance at the Jingfusi factory.

Main configuration

Name	Brand
NC System	Taiwan SYNTEC 22TA system, crystal panel,10.4-inch screen
X/Z axis servo	Japan Yaskawai or Taiwan SYNTEC
Spindle	Taiwan-made POSA spindle (or custom-made Jingfusi tail-mounted direct-drive electric spindle for an additional 3,000 yuan).
Spindle motor	Taiwan SYNTEC or Beijing CBT
X/Z Screws	Taiwan-made PMI or Hiwin C3-grade futures-ground lead screw with double nut. One end has a blind thread.
X/Z Linear Guides	Taiwan-made PMI or Hiwin P-grade roller guide rails with extended slides for increased load capacity and enhanced rigidity.
Lubrication System	Japanese HERG lubricating oil pump (joint venture).
Electrical Components	German-made Schneider electrics.
Hydraulic Station	Customized hydraulic station. User-provided 46# genuine Great Wall anti-wear hydraulic oil.
Cast Iron One-Piece Bed	In-house development.
Includes new features	SYNTEC System G183 (End Face Drilling Circulation) V01

Machine tool accessories list

(The following accessories are included in a single device)

No.	Contents	Specification	Unit	Remark
1	Push-up spring collet	Standard configuration: 2 pieces	2set	Specifications optional
2	tool holder		8set	Packed in accessory box
3	machine tool leveling pad		4 pcs	Packed in accessory box
4	foot switch		1set	Installed in accessory box or on turret
5	Allen wrench		1set	Packed in accessory box
6	Machine tool maintenance and repair manual	Includes M code, G code, circuit diagram	１PCS
7	SYNTEC user manual	USB flash drive	1 pcs	Packed in accessory box
8	Servo drive manual		1 copy	Packed in accessory box

Get in touch with us

To pursuit for modern enterprise management, pursuit for customer first service, pursuit for product excellence. Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!

input must not exceed 280 in length!

name

Please enter a valid email address!

input must not exceed 280 in length!

textarea must not exceed 65530 in length!

content