1. Swing over lathe diameter 600mm
2. Max. turning length 400mm
3. One piece casting base and slanting bed keep good stable machine performance
4. Spindle bore 79mm
Introduction
● .Taiwan SYNTEC22TB controller
● .Adopting the monolithic conjoined L structure of lathe bed
● Can process stainless steel, titanium alloy, high temperature alloy materials.
● The machine has good performance high precision, low noise, new style, etc
● This machine tool adopts a direct drive turret with a built-in 8.5KW power motor, a maximum speed of 12000r/min, and no bevel gear transmission mechanism, which greatly reduces the impact of thermal variables on processing dimensions.
Main Specification
Model of lathe | CK65DTY | |
Machining capacity | Max. swing diam. over lathe | Ø600mm |
Max. turning length | 400mm | |
Maximum bar material diameter | Ø45 | |
Spindle | Spindle model | A2-6 |
Spindle bore diameter | Ø56 mm | |
Max. Spindle speed | max.4200r/min | |
Setting spindle speed | 1-3500 rpm | |
X/Z/Y axis feeding | X-axis maximum travel |
Without tailstock: 175+80 (i.e. 90 degrees, the power head passes 80 degrees through the spindle center) |
Z-axis maximum travel | 400mm(optional 600mm) | |
Y-axis maximum travel | ±60 mm | |
X/Z/Y axis max. fast travel speed | 24/24/15 m/min | |
X/Z/Y axis C3 grade screw | 32/32/32mm | |
X axis Roller P4-level linear rail | 35/35/35 mm Lengthen the slider, increase the load and enhance rigidity | |
Turret tools |
Power turret model ( direct driving type ) |
BMT55/45 |
Power turret model (direct driving type) | ER25/32/45 | |
Static Tools dimension | 25x25 mm | |
Boring tools | Ø32/40 | |
Motor | Main motor power | SYNTEC 11kw |
Spindle motor torque | Rated 72 N.M | |
Maximum speed of turret power motor | 6000( settubg 4500)rmin | |
X/Y/Z axis motor power | SYNTEC2.4KW or YASKAWAI1.8KW |
|
Maximum speed of power motor of power tool turret | 8000 rpm (0° power head≤8000r,90° power head≤6500r) | |
Turret tool change motor power/torque | SYNTEC1.0KW/3.1 N.M | |
Spindle positioning brake device | Hydraulic | |
Other items | Slanting bed degree | 35 degrees |
Machine L x W x H | 2200 x1500 x 1900 mm | |
Machine net weight | 3900 kg | |
Total horse | 15 KW | |
average power consumption | 3kw/h |
Machine precision specification
Main inspection items | Detection method | factory standard |
Spindle radial run-out | Detect run-out of outer cone | 0.0025 |
X-axis repeat position | Detect repeated positioning of the X-axis. Note: First predict about 50 times to offset the error of the cold engine and hot engine, and then detect the repeated positioning. | 0.0025 |
Z-axis repeat position | Detect repeated positioning on the Z axis. Note: First predict about 50 times to offset the error of the cold engine and hot engine, and then detect the repeated positioning. | 0.0025 |
Y-axis repeat position |
Detect repeated positioning on the Y axis. Note: First predict about 50 times to offset the error of the cold engine and hot engine, and then detect the repeated positioning. |
0.003 |
Power head clamping run-out | Cone beat | 0.004 |
If the customer wants to test the ISO or VD1 accuracy of X/Z/Y axis, it shall be determined at the time of writing the contract. The customer must test this item at the same time of the initial acceptance of South Factory. |
Configuration standard accessories
Name | Specification | Brand |
NC controller | SYNTEC 22TB ,crystal panel10.4inches | Taiwan SYNTEC |
X/Y /Z axis servo driver | Standard setting SYNTEC2.4KW (optional:YASKAWAI 1.8kw),X-axis motor with brake | China |
Power head motor | Standard: SYSKAWAL motor | China |
X/Y/Z-axis screw | C3 grade futures grinding screw with double nut. One end is blind threaded. | Taiwan PMI or Hiwin |
X/Y/Z-axis linear guild way | Roller P-level linear rail | Taiwan HIWIN OR PMI |
Spindle | Standard, Taiwan POSA | Taiwan POSA |
Spindle motor | SYNTEC | Taiwan SYNTEC |
Sixteen-station direct drive turret | JFS direct drive turret: built-in direct drive 8000 rpm 8.5KW electric spindle, power gearless module transmission | Made in China |
Powered turret tool | Hydraulic brake | Made in China |
Fully closed loop indexing | The spindle is equipped with Taiwan SYNTEC magnetic ring encoder | Taiwan SYNTEC |
Rotary cylinder |
High speed rotary cylinder |
Taiwan |
One piece casting base | The bed and base are all made of resin sand and cast in one piece, without adding cement. The internal stress removal method of the cast iron is completely vibrated/fully annealed/insulated/aging, and then placed for a period of time after finishing and then tested to pass the test. | Made in china |
Lubrication | Japan Valley brand lubricating oil pump (joint venture) | Made in China Foshan |
Hydraulic unit | Guangzhou ZhanPing hydraulic station | Made in China |
Cooling pump | Water pump power 370W high pressure water pump.Spindle wall panel ejection | Made in china |
Machine metal cover | The outer cover is made of national standard thick 2mm cold plate | Made in China |
Processing blow valve | Install 2 Air TAC solenoid valves to prepare for air blowing. The system controls the air blowing to realize the processing air blowing function. | Taiwan |
Electrical distribution box cooling | Use copper tubes (durable) to install environmentally friendly heat transfer media heat exchanges to cool down the circulation in the electrical box and keep it clean. | Made in China |
Electrical distribution box cooling | Use copper tubes (durable) to install environmentally friendly heat transfer media heat exchanges to cool down the circulation in the electrical box and keep it clean. | Made in China |
Electrical components | Schneider Electrical components | Made in China |
Oil cooler | Customized constant temperature oil cooler | Made in China |
Oil mist separator | Separate part of the gas and liquid (or oil) in the mist | JFS |
power cable | 5 meters cable, high temperature resistance, wear resistance and corrosion resistance | Made in China |
Standard Accessories with machine
Item | Name | Specification | Quantity | Remark |
1 | Enamel tool holder | Ø25/32/45 | 3PCS | |
2 |
Outside diameter square tool holder (including pressure block) |
25 x 25 | 4 pcs | |
3 | Square end tool holder ( including pressure block) | 25 x 25 | 1 pcs | |
4 | 0° power head tool holder | Standard maximum speed≤4000r/min | 1 pcs | |
5 | 90° power head tool holder | Standard maximum speed≤4000r/min | 1pcs | |
6 | 0° power head tool holder | High quality surface maximum speed≤6000r/min | 1pcs | |
7 | 90° power head tool holder | 1pcs | ||
8 | Machine mattress iron | 4 sets | ||
9 | Foot switch | 1PCS | ||
10 |
Power head ER collet |
1 set | ||
11 |
Power head wrench |
2pcs |
Choose one according to the power head |
|
12 | Allen wrench | 1 set |
Technical data with the machine
item | name | specification | quantity | remark |
1 |
Machine tool maintenance and repair manual |
Including M code, G code, circuit diagram | 1set | in accessories box |
2 | SYNTEC User Manual | Udisk | 1 pcs | in accessories box |
3 | Turret user manual | 1set | in accessories box | |
4 | Servo driver user manual | 1set | in accessories box |
Contact Us
+86 13928187729
+86 13928187729
manager@jeasoncnc.com / js_john@vip.163.com
No.3 Huafu Road, Bianjiaojuweihui, Ronggui town Shunde Foshan City, Guangdong Pronvice China.