Guangzhou South CNC 大號athe 中號achine Tool Company Limited
Ëxport company: ZHONGSHAN SAQIANG IMPORT AND EXPORT TRADING CO., 有限公司
CN6250B/2000 手冊 Lathe
主要表現
1. Machining length up to 2000mm
2. Swing over bed diameter 500mm
3. Swing over bed diameter 630mm on saddle place
4. Casting base and 2 pieces with working bed
5. Spindle bore diameter is 82mm
6. Roundness is not exceeding 0.01mm
7. Cylindricity is not exceeding 100mm
8. Measure Length is not exceeding 0.01mm
9. 表面度(出去) is not exceeding 25um
10. New design for fast moving for Z axis.
11. 該機精度高, 低噪聲, 剛性好, 新風格, 等等
主要規格
模型 | CN6250B | |
主要規格 | 主軸中心高 | 250 毫米 |
在床上搖擺 | 500毫米 | |
最高. length of work piece | 2000 毫米 | |
Tools travel on Z-axis | 2000 毫米 | |
max. machining diameter on tool carrier | 300 毫米 | |
Bar material diameter | 80毫米 | |
主軸 | 主軸孔徑 | Φ82 |
主軸孔錐度 | φ90/1:2 | |
Range of Spindle speed | 9~1600 r/min , 24 grade for both rotations | |
Tools supporter | 最高. X軸刀具支架 | 360 毫米 |
最高. travel of small tools supporter | 145 毫米 | |
precision on Z axis | 1 mm/step. 300 毫米/轉 | |
Precision on X axis | 0.05 mm/step. 5 毫米/轉 | |
precsion on small tool supporter | 0.05 mm/step 5 毫米/轉 | |
Rotation angle range on turret | 1°/step | |
Center height to the supporter side | Approx-28 mm | |
Dimension of tool(H x W) | 25 mm×25 mm | |
Feeds rate for Z axis | 0.028~6.43 mm/r 93 成績 | |
Feeds rate for X axis | 0.012~2.73 mm/r 93 grade | |
尾座 | Taper of tailstock sleeve | MT5 |
Max travel of tailstock sleeve | 150 毫米 | |
Max travel of tailstock on X axis | ±15毫米 | |
Screw Thread | 螺紋公制螺距 | 0.5~224 48 成績 |
螺紋 英寸 螺距 | 72~1/8 t/ in 48 成績 | |
螺紋模距 | 0.5~112 mm 42 成績 | |
螺紋徑節 | 56~1/4 DP 45 成績 | |
發動機 | 主馬達 | 7.5 千瓦 |
主電機轉速 50Hz | 1500 轉/分 | |
冷卻泵電機 | 90寬 | |
外形尺寸(長 x 寬 x 高) | 2000 毫米 | 3625×1077×1315 mm |
淨重 | 2650 公斤 | |
Belt | Main drive belt specification | B-2260 mm |
精密標準
單元:毫米
檢驗項目 | 中國標準 | 工廠標準 |
加工精度 | IT8 | IT8 |
加工工件圓度精度 | 0.007毫米 | 0.006毫米 |
加工工件圓柱度精度 | 0.015毫米/Ф300毫米 | 0.013毫米/Ф200毫米 |
加工工件的表面度 | Ra3.2微米 | Ra2.8微米 |
加工工件平面度 | 0.02毫米 / 300毫米 | 0.018毫米 / 300毫米 |
配置標準配件
名稱 | 規格 | 牌 | 備註 |
主馬達 | 7.5 KW 三相異步電動機 | 中國製造 | |
主軸軸承 | 精度等級5 | 中國製造 | |
X軸滾珠絲槓 | 中國製造 | ||
與- 軸滾珠絲槓 | |||
手動夾頭 | 3 Jaws chuck 250mm | 中國製造 | |
電氣元件 | 中國製造 |
標準配件:
沒有. | 名稱 | 規格 | 數量 |
1 | 一組燈光 | 1 組 | |
2 | 冷卻系統 | 1 組 | |
3 | 3 顎夾頭 | 250 | 1 組 |
4 | 3 爪夾頭運輸板 | φ250 | 1 組 |
5 | 尾座 | MT5 | 2 組 |
6 | 尾座套筒 | 1 : 20/M.T5 | 1 組 |
7 | 雙頭扳手 | 10×12 S91-1 | 1 組 |
8 | 雙頭扳手 | 14×17 S91-1 | 1 組 |
9 | 雙頭扳手 | 19×22 S91-1 | 1 組 |
10 | 雙頭扳手 | 27×30 S91-1 | 1 組 |
11 | 方盒扳手 | 22 S92-3 | 1 組 |
12 | 開槽螺母單頭扳手 | 45-52 S93-1 | 1 組 |
13 | 開槽螺母單頭扳手 | 115-130 S93-1 | 1 組 |
14 | 開槽螺母單頭扳手 | 145-160 S93-1 | 1 組 |
15 | 內六角扳手 | 5 S91-7 | 1 組 |
16 | 內六角扳手 | 6 S91-7 | 1 組 |
17 | 內六角扳手 | 8 S91-7 | 1 組 |
18 | 內六角扳手 | 10 S91-7 | 1 組 |
19 | 內六角扳手 | 12 S91-7 | 1 組 |
20 | 螺絲刀 | 150 | 1 組 |
21 | 油槍 | YQ100 | 1 組 |
22 | 腳螺栓 | M16×400;GB799-76 | 6 組 |
23 | 堅果 | M16;GB52-76 | 6 組 |
24 | 墊圈 | 16;GB97-76 | 6 組 |
25 | 三角帶 | 40 series manual B2260 (89″) | 4 組 |
50 series manual B2330 (92″) | 4 組 | ||
26 | Change gear | Z=84(for 50 series machine) | 1 |
27 | Change gear | Z=69 (for 40 series machine) | 1 |
28 | Change gear | Z=56;60 | 1 |
29 | Change gear | Z=57 | 1 |
技術日期:
1. | 機器使用手冊 | 1 組 |
2. | 機器認證 | 1 組 |
3. | 打包清單 | 1 組 |