500mm golifu lori ibusun CNC lathe –445mm machining ipari
Main performance(XN-X52L)
1. Swing over lathe diameter 500mm
2. Slanting bed slope 45 degree
3. One piece casting base and slanting bed
4. length of processing(self-produce chuck)445mm
5. length of processing(hydraulic chuck) 405mm
6. Roundness is not exceeding 0.003mm,
7. The Z axis screw backlash is not exceeding 0.01mm
8. The X axis screw backlash is not exceeding 0.01mm
9. Ball screw and guide lead rail uses the forced lubrication
10. The machine tool base is optimization designed under the finite element analysis.
11. Awọn ẹrọ ni o ni ti o dara išẹ ga konge, kekere ariwo, titun ara, ati be be lo
Ifilelẹ akọkọ
Awoṣe ti lathe | CN-X52L | |
Main specifications | Max. diam golifu. lori lathe | 500mm |
Lathe bed slope | 45 degree | |
Processing range | Max. diam. processing over the lathe | 480mm |
Max. drilling diam.(axle and sleeve) | 295mm | |
Max. length of processing(self-produce chuck) | 445mm | |
Max. length of processing(hydraulic chuck) | 405mm | |
Max .diameter of the bar | Ø52mm | |
Height of the centre(from slide plate to the centre of the spindle) | 150mm | |
Spindle | Spindle bíbo | Ø62mm |
Type of the spindle head | A2-6 | |
Spindle ori gba taper | Iwọn opin 68,1:20 | |
Max. speed of spindle | 3500r / min | |
Clamp | The hydraulic clamp | A2-6 |
Turret | Type of the turret | Gang type |
Size of the turret | 20 x 20mm | |
Max. size of the turret | 25mm | |
Feed shaft | Max. X direction travel | 970mm |
Max. Z direction travel | 520mm | |
X/Z. axle rapid movement speed | 24/24m/min | |
Max. feeding speed of cutting | 8000mm / mi | |
The Z axis screw backlash | ≦0.01 | |
The X axis screw backlash | ≦0.01 | |
Processing accuracy | Roundness | ≦0.003 |
Taper | ≦0.005/100 | |
Coaxiality | ≦0.004/100 | |
Position accuracy | ±0.005 | |
Repeat position accuracy | ±0.0025 | |
Lubrication | Lead screw and guide rail uses the forced lubrication | |
Moto | Agbara agbara akọkọ(standard configuration) | 7.5gb |
Power of X axle / Z axle drive motor | 1.3gb | |
The longitudinal(Z direction)servo motor torque | 8.34N.m | |
The transverse(X direction)servo motor torque | 8.34N.m | |
Type of cooling pump | AYB-20 0.115KW | |
Total power | 15KW | |
Iwọn ẹrọ(L x W x H) | 2400mm X 1900mm X 3000mm | |
Iwọn | 3000 kg |
Idiwọn konge
Ẹyọ:mm
Ohun ayẹwo | China bošewa | Boṣewa Factory |
Konge ẹrọ | IT8 | IT8 |
Konge ti machining iṣẹ nkan roundness | 0.007mm | 0.006mm |
Konge ti machining iṣẹ nkan cylindricity | 0.015mm / Ф300mm | 0.013mm/Ф200mm |
Ṣiṣẹ nkan iṣẹ surfaceness | Ra3.2μm | Ra2.8μm |
Ṣiṣẹ nkan iṣẹ ẹrọ | 0.02mm / 300mm | 0.018mm / 300mm |
Awọn ẹya ara ẹrọ boṣewa iṣeto ni
Oruko | Sipesifikesonu | Brand | Ifesi |
Motor akọkọ | 7.5 KW servo motor | Ṣe lati orilẹ-ede Ṣaina | |
Ti nso Spindle | P4 | Ṣe lati orilẹ-ede Ṣaina | |
X-apakan rogodo dabaru | C3 | Ṣe lati orilẹ-ede Ṣaina | |
Z- axis rogodo dabaru | C3 | ||
chuck | 8” iyan | Ṣe lati orilẹ-ede Ṣaina | |
Itanna irinše | All | Ṣe lati orilẹ-ede Ṣaina |
Standard ẹya ẹrọ:
Rara. | Oruko | Sipesifikesonu | QTY |
1 | Socket ori wrench | 1 ṣeto | |
2 | Ṣii spanner | 1 ṣeto | |
3 | Ifi wrench | 1 ṣeto | |
4 | Spindle fa ọpá | 1 ṣeto | |
5 | Spindle flange | 1 ṣeto | |
6 | Ifiranṣẹ ọpa gigun | 4 ṣeto | |
7 | Rere ati odi gun ọpa ifiweranṣẹ | 1 ṣeto | |
8 | Liluho ọpa post | 2 ṣeto | |
9 | Spring collet chuck | 2 ṣeto | |
10 | Apoti irinṣẹ | 1 ṣeto |
Ọjọ imọ-ẹrọ:
1. | Ilana itọnisọna iṣẹ | 1 ṣeto |
2. | System appendix sipesifikesonu | 1 ṣeto |
3. | Iroyin igbeyewo didara | 1 ṣeto |
4. | Atokọ ikojọpọ | 1 ṣeto |