420מם מאַך איבער בעט קנק לייד –285מם מאַשינינג לענג
Main performance(CN-X46P)
1. Swing over lathe diameter 420mm
2. Slanting bed 45 degree
3. length of processing(self-produce chuck)285mm
4. length of processing(hydraulic chuck) 215mm
5. One piece casting base and slanting bed
6. The Z axis screw backlash is not exceeding 0.01mm
7. The X axis screw backlash is not exceeding 0.01mm
8. Ball screw and guide lead rail with the forced lubrication
9. The machine tool base is optimization designed under the finite element analysis.
10. די מאַשין האט גוט פאָרשטעלונג און הויך פּינטלעכקייַט, נידעריק ראַש, נייַע סטיל, עטק
הויפּט באַשרייַבונג
מאָדעל פון לייד | CN-X46P | |
Main specifications | מאַקס. מאַך דיאַם. איבער לייד | 420mm |
Lathe bed slope | 45 degree | |
Processing range | מאַקס. diam. processing over the lathe | 420mm |
מאַקס. drilling diam.(axle and sleeve) | 158mm | |
מאַקס. length of processing(self-produce chuck) | 285mm | |
מאַקס. length of processing(hydraulic chuck) | 215mm | |
Max .diameter of the bar | Ø 45mm | |
Height of the centre(from slide plate to the centre of the spindle) | 80mm | |
שפּינדל | שפּינדל נודניק | 56mm |
Type of the spindle head | ØA2-5 | |
Spindle head collect taper | שישקע 6 | |
מאַקס. speed of spindle | 5000ר / מין | |
Clamp | The hydraulic clamp | A2-5 |
טערט | טיפּ פון טערט | Gang type |
Size of the turret | 20 רענטגענ 20 מם | |
מאַקס. size of the turret | Ø25mm | |
Feed shaft | מאַקס. X direction travel | 840mm |
מאַקס. Z direction travel | 300mm | |
X/Z. axle rapid movement speed | 24/24ם / מין | |
מאַקס. feeding speed of cutting | 8000מם / מין | |
The Z axis screw backlash | ≦0.01 | |
The X axis screw backlash | ≦0.01 | |
Processing accuracy | Roundness | ≦0.003 |
Taper | ≦0.005/100 | |
Coaxiality | ≦0.004/100 | |
Position accuracy | ±0.005 | |
Repeat position accuracy | ±0.0025 | |
Lubrication | Ball screw and guide lead rail with the forced lubrication | |
מאָטאָר | הויפּט מאָטאָר מאַכט(standard configuration) | 5.5kw |
Power of X axle / Z axle drive motor | 0.85 kw | |
The longitudinal(Z direction)servo motor torque | 6N.m | |
The transverse(X direction)servo motor torque | 6N.m | |
Type of cooling pump | AYB-20 0.125KW | |
Total power | 12KW | |
מאַשין ויסמעסטונג(L x W x H) | 2080mm X 1456mm X 1710mm | |
וואָג | 2200 קג |
פּינטלעכקייַט נאָרמאַל
אַפּאַראַט:mm
דורכקוק נומער | טשיינאַ נאָרמאַל | פאַבריק נאָרמאַל |
מאַשינינג פּינטלעכקייַט | IT8 | IT8 |
פּינטלעכקייַט מאַשינינג אַרבעט שטיק ראָונדנעסס | 0.007mm | 0.006mm |
פּינטלעכקייַט מאַשינינג אַרבעט שטיק סילינדריקיטי | 0.015מם / -300 מם | 0.013מם / Ф200 מם |
מאַשינינג אַרבעט סורפאַסענעסס | Ra3.2μm | Ra2.8μm |
מאַשינינג אַרבעט שטיק פּלאַנענעסס | 0.02mm / 300mm | 0.018mm / 300mm |
קאַנפיגיעריישאַן נאָרמאַל אַקסעסעריז
נאָמען | ספּעציפיקאַציע | סאָרט | באַמערקונג |
הויפּט מאָטאָר | 5.5 kw servo motor | געמאכט אין כינע | |
שפּינדל שייַכעס | P4 | געמאכט אין כינע | |
רענטגענ -אַקס פּילקע שרויף | C3 | געמאכט אין כינע | |
מיט- אַקס פּילקע שרויף | C3 | ||
Hydraulic chuck | 6”אַפּשאַנאַל | געמאכט אין כינע | |
עלעקטריקאַל קאַמפּאָונאַנץ | all | געמאכט אין כינע |
נאָרמאַל אַקסעסעריז:
ניין. | נאָמען | ספּעציפיקאַציע | קטי |
1 | שליסל שליסל שליסל | 1 שטעלן | |
2 | עפענען שפּענער | 1 שטעלן | |
3 | באַרס מוטער-שליסל | 1 שטעלן | |
4 | שפּינדל ציען רוט | 1 שטעלן | |
5 | שפּינדל פלאַנדזש | 1 שטעלן | |
6 | לאנג געצייַג פּאָסטן | 4 שטעלן | |
7 | Positive און נעגאַטיוו לאַנג פּאָסטן | 1 שטעלן | |
8 | דרילינג געצייַג פּאָסטן | 2 שטעלן | |
9 | Spring collet chuck | 2 שטעלן | |
10 | Toolbox | 1 שטעלן |
טעכניש דאַטע:
1. | אַפּערייטינג ינסטרוקטיאָן מאַנואַל | 1 שטעלן |
2. | סיסטעם אַפּפּענדיקס באַשרייַבונג | 1 שטעלן |
3. | קוואַליטעט טעסטינג באַריכט | 1 שטעלן |
4. | פּאַקינג רשימה | 1 שטעלן |