500מם מאַך איבער בעט קנק לייד מאַשינינג צענטער-350 מם מאַשינינג לענג
Main performance(ZY-46)
1. Swing over lathe diameter 500mm
2. Slanting bed is 45 degree
3. One piece casting base and slanting bed
4. Automatic bar feeder for work piece and workpiece conveyor.
5. Roundness is not exceeding 0.003mm,
6. The x-axis re-position accuracy is ±025mm
7. The z-axis re-position accuracy is ±005mm
8. speed of spindle 6000r/min
9. The machine adopts the integral structure of body
10. די מאַשין האט גוט פאָרשטעלונג און הויך פּינטלעכקייַט, נידעריק ראַש, נייַע סטיל, עטק
הויפּט באַשרייַבונג
מאָדעל פון לייד | ZY-46 | ||
Main specifications | מאַקס. מאַך דיאַם. איבער לייד | 500mm | |
Lathe bed slope | 45 degree | ||
Processing range | מאַקס. drilling diam.(shaft and sleeve) | 158mm | |
מאַקס. length of processing(self-produce chuck) | 350mm | ||
מאַקס. length of processing(hydraulic chuck) | 300mm | ||
מאַקס. diameter of the bar | diameter 45mm | ||
Processing accuracy | Roundness | ≦0.003 | |
Taper | ≦0.005/100 | ||
Coaxiality | ≦0.004/100 | ||
X-axis position accuracy | ±0.005mm | ||
Z-axis position accuracy | ±0.01mm | ||
X-axis repeat position accuracy | ±0.025mm | ||
Z-axis repeat position accuracy | ±0.005mm | ||
The spindle performance | שפּינדל נודניק | Diameter 56mm | |
Type of the spindle head | A2-5 | ||
מאַקס. speed of spindle | 6000r/mm | ||
The motor performance | הויפּט מאָטאָר מאַכט(standard configuration) | 5.5kw | |
The longitudinal (Z direction)servo motor torque | 7.2N.m | ||
The transverse(X direction)servo motor torque | 7.2N.m | ||
Hydraulic clamping | Standard collect | Collect specifications | A2-5 adapter |
Feed performance | מאַקס. X direction travel | 970mm diameter | |
מאַקס. Z direction travel | 395mm | ||
מאַקס. feeding speed of cutting | 8000מם / מין | ||
X/Z direction rapid movement speed | 24/24ם / מין | ||
טיפּ פון טערט | Gang type | ||
Turret performance | Size of the turret | 20 x 20 mm | |
מאַקס. size of the turret | Diameter 25mm | ||
Robot machine performance | רייזע פון רענטגענ אַקס | 2000mm | |
רייזע פון י אַקס | 800mm | ||
רייזע פון ז אַקס | 150mm | ||
מאַקס. weight for Single claw | 1קג | ||
Number of claw | 2 | ||
Tray performance | Tray size | 800 x 800 mm | |
Workpiece size of the tray can support | Max outside diameter 50mm, height 100mm | ||
Workpiece number of the tray can support | 80-100 | ||
Maximum weight of loading | 100קג | ||
Workpiece positioning mode | Formation of the claw positions | ||
מאַשין ויסמעסטונג(L x W x H) | 3300mm x 1700mm x 2000mm | ||
וואָג | 2800 קג | ||
פּינטלעכקייַט נאָרמאַל
אַפּאַראַט:mm
דורכקוק נומער | טשיינאַ נאָרמאַל | פאַבריק נאָרמאַל |
מאַשינינג פּינטלעכקייַט | IT8 | IT8 |
פּינטלעכקייַט מאַשינינג אַרבעט שטיק ראָונדנעסס | 0.007mm | 0.006mm |
פּינטלעכקייַט מאַשינינג אַרבעט שטיק סילינדריקיטי | 0.015מם / -300 מם | 0.013מם / Ф200 מם |
מאַשינינג אַרבעט סורפאַסענעסס | Ra3.2μm | Ra2.8μm |
מאַשינינג אַרבעט שטיק פּלאַנענעסס | 0.02mm / 300mm | 0.018mm / 300mm |
קאַנפיגיעריישאַן נאָרמאַל אַקסעסעריז
נאָמען | ספּעציפיקאַציע | סאָרט | באַמערקונג |
הויפּט מאָטאָר | 5.5 קוו סערוואָ מאָטאָר | געמאכט אין כינע | |
שפּינדל שייַכעס | P4 | געמאכט אין כינע | |
רענטגענ -אַקס פּילקע שרויף | C3 | געמאכט אין כינע | |
מיט- אַקס פּילקע שרויף | C3 | ||
טשאַק | 6”אַפּשאַנאַל | געמאכט אין כינע | |
עלעקטריקאַל קאַמפּאָונאַנץ | אַלע | געמאכט אין כינע |
נאָרמאַל אַקסעסעריז:
ניין. | נאָמען | ספּעציפיקאַציע | קטי |
1 | שליסל שליסל שליסל | 1 שטעלן | |
2 | עפענען שפּענער | 1 שטעלן | |
3 | באַרס מוטער-שליסל | 1 שטעלן | |
4 | שפּינדל ציען רוט | 1 שטעלן | |
5 | שפּינדל פלאַנדזש | 1 שטעלן | |
6 | לאנג געצייַג פּאָסטן | 4 שטעלן | |
7 | Positive און נעגאַטיוו לאַנג פּאָסטן | 1 שטעלן | |
8 | דרילינג געצייַג פּאָסטן | 2 שטעלן | |
9 | Spring collet chuck | 2 שטעלן | |
10 | Toolbox | 1 שטעלן |
טעכניש דאַטע:
1. | אַפּערייטינג ינסטרוקטיאָן מאַנואַל | 1 שטעלן |
2. | סיסטעם אַפּפּענדיקס באַשרייַבונג | 1 שטעלן |
3. | קוואַליטעט טעסטינג באַריכט | 1 שטעלן |
4. | פּאַקינג רשימה | 1 שטעלן |