500ملی میٹر سے زائد CNC بستر سوئنگ خراد –325ملی میٹر مشینی لمبائی
Main performance(CN-X52)
1. Swing over lathe diameter 500mm
2. Slanting bed 45 degree
3. One piece casting base and slanting bed keep good stable performance for machine
4. length of processing(self-produce chuck)325ملی میٹر
5. length of processing(hydraulic chuck) 275ملی میٹر
6. Roundness is not exceeding 0.003mm,
7. The Z axis screw backlash is not exceeding 0.01mm
8. The X axis screw backlash is not exceeding 0.01mm
9. Ball screw and guide lead rail with the forced lubrication
10. The machine tool base is optimization designed under the finite element analysis.
11. The machine has good performance high precision, کم شور, نیا انداز, وغیرہ
اہم تفصیلات
Model of lathe | CN-X52 | |
Main specifications | زیادہ سے زیادہ. swing diam. over lathe | 500ملی میٹر |
Lathe bed slope | 45 degree | |
Processing range | زیادہ سے زیادہ. diam. processing over the lathe | 480ملی میٹر |
زیادہ سے زیادہ. drilling diam.(axle and sleeve) | 295ملی میٹر | |
زیادہ سے زیادہ. length of processing(self-produce chuck) | 325ملی میٹر | |
زیادہ سے زیادہ. length of processing(hydraulic chuck) | 275ملی میٹر | |
Max .diameter of the bar | تکلا سے ٹیل اسٹاک کے درمیان فاصلہ | |
Height of the centre(from slide plate to the centre of the spindle) | 150ملی میٹر | |
تکلا | Spindle bore | Ø62mm |
Type of the spindle head | A2-6 | |
Spindle head collet taper | Diameter 68,1:20 | |
زیادہ سے زیادہ. speed of spindle | 3500r/منٹ | |
Clamp | The hydraulic clamp | A2-6 |
جی ایس کے 980 | Type of the turret | Gang type |
Size of the turret | 20 x 20mm | |
زیادہ سے زیادہ. size of the turret | 25ملی میٹر | |
Feed shaft | زیادہ سے زیادہ. X direction travel | 970ملی میٹر |
زیادہ سے زیادہ. Z direction travel | 395ملی میٹر | |
X/Z. axle rapid movement speed | 24/24m/min | |
زیادہ سے زیادہ. feeding speed of cutting | 8000تکلا سے ٹیل اسٹاک کے درمیان فاصلہ | |
The Z axis screw backlash | ≦0.01 | |
The X axis screw backlash | ≦0.01 | |
Processing accuracy | Roundness | ≦0.003 |
Taper | ≦0.005/100 | |
Coaxiality | ≦0.004/100 | |
Position accuracy | ±0.005 | |
Repeat position accuracy | ±0.0025 | |
Lubrication | Ball screw and guide lead rail with the forced lubrication | |
موٹر | تکلا سے ٹیل اسٹاک کے درمیان فاصلہ(standard configuration) | 7.5کلو واٹ |
Power of X axle / Z axle drive motor | 1.3کلو واٹ | |
The longitudinal(Z direction)servo motor torque | 8.34تکلا سے ٹیل اسٹاک کے درمیان فاصلہ | |
The transverse(X direction)servo motor torque | 8.34تکلا سے ٹیل اسٹاک کے درمیان فاصلہ | |
Type of cooling pump | AYB-20 0.115KW | |
Total power | 15کلو واٹ | |
Machine dimension(L x W x H) | 2170mm X 1700mm X 1850mm | |
وزن | 2800 کلو |
صحت سے متعلق معیار
یونٹ:ملی میٹر
معائنہ کا سامان | چین کا معیار | فیکٹری کا معیار |
مشینی صحت سے متعلق | آئی ٹی 8 | آئی ٹی 8 |
مشینی کام کے ٹکڑے کی گول پن کی درستگی | 0.007ملی میٹر | 0.006ملی میٹر |
مشینی کام کے ٹکڑے سلنڈریٹی کی صحت سے متعلق | 0.015ملی میٹر/Ф300 ملی میٹر | 0.013ملی میٹر/Ф200 ملی میٹر |
مشینی کام کے ٹکڑے کی سطحی پن | Ra3.2μm | Ra2.8μm |
مشینی کام کا ٹکڑا طیارہ پن | 0.02ملی میٹر / 300ملی میٹر | 0.018ملی میٹر / 300ملی میٹر |
کنفیگریشن معیاری لوازمات
نام | تفصیلات | برانڈ | تبصرہ |
مین موٹر | 7.5 KW سروو موٹر | چائنا کا بنا ہوا | |
سپنڈل بیئرنگ | جی ایس کے 980 | چائنا کا بنا ہوا | |
ایکس محور گیند سکرو | جی ایس کے 980 | چائنا کا بنا ہوا | |
کے ساتھ- محور گیند سکرو | جی ایس کے 980 | ||
chuck | 8” optional | چائنا کا بنا ہوا | |
برقی اجزاء | All | چائنا کا بنا ہوا |
معیاری لوازمات:
نہیں. | نام | تفصیلات | مقدار |
1 | Socket head wrench | 1 سیٹ | |
2 | Open spanner | 1 سیٹ | |
3 | Bars wrench | 1 سیٹ | |
4 | Spindle pull rod | 1 سیٹ | |
5 | Spindle flange | 1 سیٹ | |
6 | Long tool post | 4 سیٹ | |
7 | Positive and negative long tool post | 1 سیٹ | |
8 | Drilling tool post | 2 سیٹ | |
9 | Spring collet chuck | 2 سیٹ | |
10 | Toolbox | 1 سیٹ |
تکنیکی تاریخ:
1. | Operating instruction manual | 1 سیٹ |
2. | System appendix specification | 1 سیٹ |
3. | Quality testing report | 1 سیٹ |
4. | پیکنگ لسٹ | 1 سیٹ |