500Heke ʻa MM ʻi he mohenga CNC fakasanisani ʻaki –350MM machining loloa
Main performance(CN-X46)
1. Swing over lathe diameter 500mm
2. Lathe bed slope is 45 degree
3. Ko e konga ʻe taha ʻo e fakavaʻe mo e mohenga slanting
4. length of processing(self-produce chuck)350MM
5. length of processing(hydraulic chuck) 300MM
6. Roundness error is not exceeding 0.003mm,
7. The Z axis screw backlash is not exceeding 0.01mm
8. The X axis screw backlash is not exceeding 0.01mm
9. Ball screw and guide lead rail with the forced lubrication
10. The machine tool base is optimization designed under the finite element analysis.
11. ʻOku lelei ʻaupito e ngaue ʻa e misini, longoaʻa maʻulalo, sipinga foʻou, etc
Tefitoʻi fakapapauʻi
Sīpinga ʻo e lathe | CN-X46 | |
Main specifications | Meki. heke diam. laka hake ʻi he lathe | 500MM |
Lathe bed slope | 45 degree | |
Processing range | Meki. diam. processing over the lathe | 480MM |
Meki. drilling diam.(axle and sleeve) | 158MM | |
Meki. length of processing(self-produce chuck) | 350MM | |
Meki. length of processing(hydraulic chuck) | 300MM | |
Max .diameter of the bar | Ø45mm | |
Height of the centre(from slide plate to the centre of the spindle) | 80MM | |
Hui | Naʻe faʻeleʻi ʻa Spindle | Ø56mm |
Type of the spindle head | A2-5 | |
Spindle head collet taper | Koeʻaí 6 | |
Meki. speed of spindle | 6000r/miniti | |
Clamp | The hydraulic clamp | A2-5 |
Turret | Type of the turret | Gang type |
Size of the turret | 20 x 20mm | |
Meki. size of the turret | Ø25mm | |
Feed shaft | Meki. X direction travel | 970MM |
Meki. Z direction travel | 395MM | |
X/Z. axle rapid movement speed | 24/24m/miniti ʻe | |
Meki. feeding speed of cutting | 8000MM/miniti ʻe | |
The Z axis screw backlash | ≦0.01 | |
The X axis screw backlash | ≦0.01 | |
Processing accuracy | Roundness | ≦0.003 |
Taper | ≦0.005/100 | |
Coaxiality | ≦0.004/100 | |
Tonu ʻa e lakangá | ±0.005 | |
Repeat position accuracy | ±0.0025 | |
Lubrication | Ball screw and guide lead rail with the forced lubrication | |
Moto | Tefitoʻi malohi ʻo e moto(standard configuration) | 5.5kw |
Power of X axle / Z axle drive motor | 1.3kw | |
The longitudinal(Z direction)servo motor torque | 8.34N.m | |
The transverse(X direction)servo motor torque | 8.34N.m | |
Type of cooling pump | AYB-20 0.115KW | |
Total power | 12KW | |
Fua ʻo e misini(L x W x H) | 2170mm X 1700mm X 1850mm | |
Mamafa ʻo e | 2500 kilo ʻe |
Tuʻunga moʻui totonu
ʻIunití:MM
Meʻa ne sivi aí | Tuʻunga moʻui ʻi | Tuʻunga ʻo e fale ngaue |
Machining totonu | IT8 | IT8 |
Machining e konga ʻo e ngaue roundness | 0.007MM | 0.006MM |
Machining e konga ʻo e ngaue cylindricity | 0.015MM/Ф300mm | 0.013MM/Ф200mm |
Machining konga ngaue surfaceness | Ra3.2μm | Ra 2.8μm |
Machining konga ʻo e ngaue planeness | 0.02MM / 300MM | 0.018MM / 300MM |
Fokotuʻutuʻu ʻo e ngaahi naunau
Hingoa | Fakapapauʻi | Kautaha | Lea ʻoku lea ʻ |
Tefitoʻi moto | 5.5 KW servo motor | Naʻe fai ʻi Siaina | |
Fua ʻo e hui | P4 | Naʻe fai ʻi Siaina | |
X-axis e sikalu fuopotopoto | C3 | Naʻe fai ʻi Siaina | |
Z- axis e sikalu fuopotopoto | C3 | ||
chuck | 6’’ optional | Naʻe fai ʻi Siaina | |
Ngaahi konga fakaʻuhila | kotoa pē | Naʻe fai ʻi Siaina |
Naunau angamaheni:
ʻIkai. | Hingoa | Fakapapauʻi | PUHA |
1 | Socket e ʻulu fakamaʻu sikalu sipana | 1 fokotuʻu | |
2 | Fakaava spanner | 1 fokotuʻu | |
3 | Ngaahi laine fakamaʻu sikalu sipana | 1 fokotuʻu | |
4 | Tā fakatātā ʻo e vaʻa ukameá | 1 fokotuʻu | |
5 | Spindle flange | 1 fokotuʻu | |
6 | Feituʻu loloa ʻo e meʻangaue | 4 fokotuʻu | |
7 | Fokotuʻu ʻo ha meʻangaue lelei mo ʻikai lelei | 1 fokotuʻu | |
8 | Pou meʻangaue vili | 2 fokotuʻu | |
9 | Faʻahitaʻu failau chuck | 2 fokotuʻu | |
10 | Puha Meʻangāué | 1 fokotuʻu |
ʻAho fakatekinikale:
1. | Tohi lēsoni fakahinohino ki hono fakalelé | 1 fokotuʻu |
2. | Fakapapauʻi ʻo e system appendix | 1 fokotuʻu |
3. | Lipooti ki hono siviʻi ʻo e tuʻunga lele | 1 fokotuʻu |
4. | Lisi hono faʻo | 1 fokotuʻu |