420mm స్వింగ్ ఓవర్ బెడ్ CNC లాథ్ –250mm మ్యాచింగ్ పొడవు
Main performance(CN-X36)
1. Swing over lathe diameter 420mm
2. Slanting bed slope 45 degrees
3. One piece casting base and slanting bed
4. Spindle speed up to 6000rpm
5. The Z axis screw backlash is not exceeding 0.01mm
6. The X axis screw backlash is not exceeding 0.01mm
7. Ball screw and guide lead rail with the forced lubrication
8. The machine tool base is optimization designed under the finite element analysis.
9. The machine has good performance high precision, తక్కువ శబ్దం, కొత్త శైలి, etc
ప్రధాన వివరణ
Model of lathe | CN-X36 | |
Main specifications | మాక్స్. swing diam. over lathe | 420mm |
Lathe bed slope | 45 degree | |
Processing range | మాక్స్. diam. processing over the lathe | 420mm |
మాక్స్. drilling diam.(axle and sleeve) | 125mm | |
మాక్స్. length of processing(self-produce chuck) | 250mm | |
మాక్స్. length of processing(hydraulic chuck) | 200mm | |
Max .diameter of the bar | Ø36mm | |
Height of the centre(from slide plate to the centre of the spindle) | 63mm | |
కదురు | Spindle bore | Ø46mm |
Type of the spindle head | A2-4 | |
Spindle head collect taper | Cone 5 | |
మాక్స్. speed of spindle | 6000r / నిమి | |
Clamp | The hydraulic clamp | A2-4 |
Turret | Type of the turret | Gang type |
Size of the turret | 20 x 20mm | |
మాక్స్. size of the turret | Ø25mm | |
Feed shaft | మాక్స్. X direction travel | 760mm |
మాక్స్. Z direction travel | 260mm | |
X/Z. axle rapid movement speed | 24/24m/min | |
మాక్స్. feeding speed of cutting | 8000mm/min | |
The Z axis screw backlash | ≦0.01 | |
The X axis screw backlash | ≦0.01 | |
Processing accuracy | Roundness | ≦0.003 |
Taper | ≦0.005/100 | |
Coaxiality | ≦0.004/100 | |
Position accuracy | ±0.005 | |
Repeat position accuracy | ±0.0025 | |
Lubrication | Ball screw and guide lead rail with the forced lubrication | |
మోటార్ | Main motor power(standard configuration) | 3.7kw |
Power of X axle / Z axle drive motor | 0.85kw | |
The longitudinal(Z direction)servo motor torque | 5.39N.m | |
The transverse(X direction)servo motor torque | 5.39N.m | |
Type of cooling pump | AYB-20 0.115KW | |
Total power | 10KW | |
Machine dimension(L x W x H) | 2040MM X 1456MM X 1710MM | |
బరువు | 2000 కిలొగ్రామ్ |
ప్రెసిషన్ స్టాండర్డ్
యూనిట్:mm
తనిఖీ అంశం | చైనా ప్రమాణం | ఫ్యాక్టరీ ప్రమాణం |
మ్యాచింగ్ ఖచ్చితత్వం | IT8 | IT8 |
మ్యాచింగ్ వర్క్ పీస్ రౌండ్నెస్ యొక్క ఖచ్చితత్వం | 0.007mm | 0.006mm |
మ్యాచింగ్ వర్క్ పీస్ సిలిండ్రిసిటీ యొక్క ఖచ్చితత్వం | 0.015mm / Ф300mm | 0.013mm / Ф200mm |
మ్యాచింగ్ వర్క్ పీస్ సర్ఫేనెస్ | Ra3.2μm | Ra2.8μm |
మ్యాచింగ్ వర్క్ పీస్ ప్లానెస్ | 0.02mm / 300mm | 0.018mm / 300mm |
కాన్ఫిగరేషన్ ప్రామాణిక ఉపకరణాలు
పేరు | స్పెసిఫికేషన్ | బ్రాండ్ | వ్యాఖ్య |
ప్రధాన మోటారు | 3.7KW servo motor | చైనాలో తయారవుతుంది | |
కుదురు బేరింగ్ | ప్రెసిషన్ గ్రేడ్ 5 | చైనాలో తయారవుతుంది | |
ఎక్స్-యాక్సిస్ బాల్ స్క్రూ | C3 | చైనాలో తయారవుతుంది | |
విత్- అక్షం బంతి స్క్రూ | C3 | ||
chuck | 5’’ optional | చైనాలో తయారవుతుంది | |
విద్యుత్ భాగాలు | all | చైనాలో తయారవుతుంది |
ప్రామాణిక ఉపకరణాలు:
తోబుట్టువుల. | పేరు | స్పెసిఫికేషన్ | QTY |
1 | Socket head wrench | 1 సెట్ | |
2 | Open spanner | 1 సెట్ | |
3 | Bars wrench | 1 సెట్ | |
4 | Spindle pull rod | 1 సెట్ | |
5 | Spindle flange | 1 సెట్ | |
6 | Long tool post | 4 సెట్ | |
7 | Positive and negative long tool post | 1 సెట్ | |
8 | Drilling tool post | 2 సెట్ | |
9 | Spring collect chuck | 2 సెట్ | |
10 | Toolbox | 1 సెట్ |
సాంకేతిక తేదీ:
1. | Operating instruction manual | 1 సెట్ |
2. | System appendix specification | 1 సెట్ |
3. | Quality testing report | 1 సెట్ |
4. | ప్యాకింగ్ జాబితా | 1 సెట్ |