640mm swing juu ya kitanda CNC lathe –460mm machining urefu
Main performance（CN-SP63Z）:
1. Kipande kimoja akitoa msingi na kitanda, keep enough rigidity and accuracy stability.
2. Swing juu ya kipenyo cha kitanda. :640mm,
3. Umbali kati ya reli ngumu :550mm
4. diameter on the carriage lathe: 480mm
5. Double triangle hard rails
6. Spindle bore 105mm.
7. Spindle with gear box, automatic transfer for three speed grades.
H: 156—1200 rpm; M: 39—312.5 rpm; L: 14—112.5 rpm.
8. Beijing CBT 11.0 KW servo motor.
9. Mfano wa kichwa cha spindle: C11/ 1:20/ Ø105mm
10. Manual three jaw chuck of 320mm diameter
11. GSK 980 mtawala
12. Servo motor, kifaa cha uzi, lubrication moja kwa moja, full cover protection for guild rail and ball screws.
| Model
vipimo |
CN-SP63Z | |
| Kuu spec | Swing juu ya kitanda | 640mm |
| Max urefu wa machining kazi kipande | 460mm | |
| Uwezo | Upeo mkubwa wa machining kitandani | 630mm |
| Upeo wa upeo wa juu kwenye kitelezi | 480mm | |
| Max length of machining | 460mm | |
| Baa kupitia kipenyo cha nyenzo | Ø103mm | |
| Urefu wa kituo cha spindle | 320mm | |
| Umbali wa katikati kati ya mkia wa mkia na spindle | Umbali kati ya spindle hadi mkia | ///// |
| Spindle | Spindle kuzaa kipenyo | Ø105mm |
| Taper ya kuzaa spindle | C11/ 1:20/ Ø105mm | |
| Mbalimbali ya spindle kasi | Gear type automatic three gear shift. 14 —-12002 rpm H: 156—1200 rpm; M: 39—312.5 rpm; L: 14—112.5 rpm. | |
| turret | Max. kusafiri kwa turret kwenye mhimili wa Z | 460mm |
| Max. kusafiri kwa turret kwenye mhimili wa X | 450mm | |
| Kasi ya kusonga haraka kwenye mhimili wa Z | 8000mm / min | |
| Kasi ya kusonga haraka kwenye mhimili wa X | 6000mm / min | |
| Nafasi za Turret | aina ya wima 4 nafasi turret | |
| Ukubwa wa turret | 32×32 mm | |
| NC turret | LD4B-CK6163 | |
| Mounting holes of drilling, ya kuchosha | MT4 | |
| Umbali kati ya kituo cha spindle kwa uso wa msaada | 32mm | |
| motor | Nguvu kuu ya motor | Beijing CBT 11 kw servo motor |
| Wakati wa motor Z axis | 16 Mch | |
| Wakati wa motor X mhimili | 6 Mch | |
| Pampu ya baridi | AYB-20 0.115kw | |
| Eleza vipimo | 2610mm x 1850mm x 1900 mm | |
| Net uzito | 3000 kgs |
Usahihi wa ukaguzi wa mashine
| Ukaguzi wa bidhaa | Uchina Kiwango | kiwango Kiwanda |
| usahihi Machining | IT7 | IT7 |
| Machining kazi kipande mviringo | 0.005mm / φ50mm | 0.004mm / φ50mm |
| Machining kipande kipande cha silinda | 0.03mm / 300mm | 0.02mm / 200mm |
| Machining kazi kipande planeness | 0.025mm / φ300mm | 0.015mm/φ200mm |
| Machining kazi kipande surfaceness | Ra2.5μm | Ra2.0μm |
| Nafasi usahihi | Mhimili wa X 0.03mm | X-axis 0.024mm |
| Z-mhimili 0.04mm | Z-axis 0.032mm | |
| Re-msimamo | Mhimili wa X 0.012mm | Mhimili wa X 0.01mm |
| Z-mhimili 0.016mm | Z-mhimili 0.012mm |
Usanidi wa mashine
| Jina la Vifaa | Maelezo ya Mfano | Mtengenezaji | remark |
| CNC | 989. Mchezaji hajali | GSK | |
| Motor kuu | 11KW spindle servo motor | China Beijing CBT | |
| X-axis motor | 6 Mch | GSK | |
| Z-mhimili motor | 16 Mch | GSK | |
| Spindle kuzaa | P4 | China famous Ha-axis bearing | |
| P4 | |||
| Spindle | 105 mm | Mashine ya Kusini | |
| Turret | Wima 4 positions turret auto LD4B-CK6163 | HTC | |
| Kofia ya mpira ya X-axis | C3 | Bot / Mto Han | |
| Z-axis mpira screw | C3 | Bot / Mto Han | |
| Parafujo fani kwa X-axis mpira screw | P4 | Harbin/Luo axis research | |
| Parafujo fani kwa Z-axis mpira screw | P4 | Harbin/Luo axis research | |
| Mwanga wa rangi tatu | Rangi tatu zinawaka | ONN | |
| Vipengele muhimu vya umeme | Relay / Mawasiliano | Japan’s Izumi/SwitzerlandABB/Schneider |
Vifaa vya kawaida vya vifaa vya mashine:
| Hapana. | jina la nyongeza | Vipimo vya Mfano | Wingi | remark |
| 1 | Rekebisha pembe na bolts | CN-SP63Z | 1 | South brand |
| 2 | Pan tools | 1 | Three gulls | |
| 3 | Screw tools | 1 | Chapa ya China | |
| 4 | Chuck | Manual jaw chuck diameter Φ320 | 1 | Chapa ya China |
Takwimu za kiufundi:
| Hapana. | Jina la data ya kiufundi | Nakala | remark |
| 1 | Chombo cha mashine ya mwongozo (mashine)-Mashini na umeme | 1 | |
| 2 | Cheti | 1 | |
| 3 | Precision inspection | 1 | |
| 4 | Orodha ya Ufungashaji | 1 | |
| 5 | Manual user operation for controller | 1 | |
| 6 | Mwongozo wa uendeshaji wa mfumo wa mdhibiti | 1 | |
| 7 | Mchoro wa umeme | 1 |
Tuma ujumbe yako kwetu:
-
500mm swing juu ya kitanda cnc lathe-1000mm urefu machining
-
500mm swing juu ya kitanda CNC lathe –1500mm machining urefu
-
360mm swing juu ya kitanda CNC lathe –1000mm machining urefu
-
360mm swing juu ya kitanda CNC lathe –750mm machining urefu
-
420mm swing juu ya kitanda CNC lathe –650mm machining urefu
-
400mm swing juu ya kitanda CNC lathe –750mm machining urefu
-
500mm swing juu ya kitanda CNC lathe –1500mm machining urefu
-
500mm swing juu ya kitanda cnc lathe-1500mm urefu machining
