400mm svänga över sängen manuell svarv –1500mm bearbetningslängd

kort beskrivning:

Main performance（C6140D-1500）
1. Swing over bed diameter 400mm
2. machining length up to 1500mm.
3. Strong performance for the casting base
4. Distance between the hard rails up to 320mm
5. Machining precision is IT8
6. Machining work piece roundness is not exceeding 0.01mm,
7. Machining work piece plainness is not exceeding 0.013mm/Ø200mm
8. Surfaceness(Ra) is not exceeding 2.8um
9. Machining diameter consistency is not exceeding 0.018mm/300mm
10. The machine has high precision, low noise, good rigidity, new style, etc

Skicka e-post till oss

Produktdetalj

Produkt Taggar

400mm svänga över sängen manuell svarv –1500mm bearbetningslängd

Main Specification

Modell		C6140D-1500
	Swinging over bed	400mm
	Max bearbetningsarbetsdel	1500mm
	Width of guide on bed	320mm
	Max machining diameter on tool carrier	240mm
	Max. Z-axis travel of tools supporter	1380mm
	Max. X-axis travel of tools supporter	220mm
	Stång genom materialets diameter	Ø50mm
	Max. swinging diameter on saddle	////
	Max. machining Length on saddle	////
Slända	Spindle Center height	200mm
	Spindle connection	C6
	Spindelhålets diameter	Ø52mm
	Avsmalnande av spindelborrningen	MT6
	Spindelhastighetsintervall	25-1600r/min 12 grades
Tailstock	Taper of top sleeve	MT4
	Tail stock sleeve max travel	130mm
	Tail stock horizontal max travel	± 10 mm
Screw threads	Threads metric pitches	0.45-20mm/r 30 models
	Threads inch pitches	80-1-3/4n/1” 35 models
	Threads modulo pitches	0.25-10mm 25 models
	Threads diametric pitches	160-3-1/2 DP 30 models
	Spindle motor model	YD132M-8/4-B5 3/4.5 kw
	Main drive belt model & spec	4-A-1900mm, 4-A-2000mm
Motor	Main motor	3 / 4.5 KW
	Main motor speed 50Hz	1500 r/min
	Cooler pump motor	90W
Overall dimension(L x W x H)	1500 mm	2700mmx950mmx1200mm
Nettovikt		1600 kg

Precision standard

Unit：mm

Inspektionsobjekt	China standard	Fabriksstandard
Bearbetning av precision	IT8	IT8
Precision of machining work piece roundness	0.007mm	0.006mm
Precision of machining work piece cylindricity	0.015mm/Ф300mm	0.013mm/Ф200mm
Bearbetning av arbetsytans ytlighet	Ra3.2μm	Ra2.8μm
Bearbetning av arbetsstycket planlighet	0.02mm / 300mm	0.018mm / 300mm

Configuration standard accessories

namn	Specifikation	varumärke	Anmärkning
Main motor	5.5 KW Three-phase asynchronous motor	Made in china
Spindellager	Precision grade5	Made in china
X -axis ball screw	///	Made in china
Z- axis ball screw	///	Made in china
Manual chuck	8 inches(3 Jaws chuck 200mm)	Made in china
Electrical components		Made in china

Standard accessories:

Nej.	namn	Specifikation	QTY
1	A set of lighting		1 set
2	Kylsystem	32A-10001	1 set
3	Adjustable mount	3#	6 set
4	3 Jaws chuck	KZ200	1 set
5	3 Jaws chuck transit plate	32D-09701	1 set
6	Tailstock	D114	1 set
7	Tailstock quill	P326*4	1 set
8	Double head spanner	12×14 S91－1	1 set
9	Double head spanner	17×19 S91－1	1 set
10	Double head spanner	12×24 S91－1	1 set
11	Single head spanner	30 S91-2	1 set
12	Square box spanner	12 S92－3	1 set
13	Slotted nut single-end spanner	38-42 S93－1	1 set
14	Slotted nut single-end spanner	45-52 S93－1	1 set
15	Slotted nut single-end spanner	100-110 S93－1	1 set
16	Slotted nut single-end spanner	115-130 S93－1	1 set
17	inner hexagon spanner	5 S91－7	1 set
18	inner hexagon spanner	6 S91－7	1 set
19	inner hexagon spanner	8 S91－7	1 set
20	inner hexagon spanner	10 S91－7	1 set
21	Screwdriver	150	1 set
22	Oil gun	YQ100	1 set
23	Foot bolt	M16×400；GB799－76	8 set
24	Nut	M16；GB52－76	8 set
25	Washer	16；GB97－76	8 set
26	Triangle belt	32A a model 1900	4 set
27	Brake block	32A-01041	2 set
29	Brake wire	Ø2.8*1250	1 set