640mm Swing ka badan sariirood CNC lathe –460mm dhererka machining
Main performance（CN-SP63Z）:
1. Hal gabal oo ka mid ah saldhig iyo sariir, ilaali qallafsanaan ku filan iyo xasilloonida saxda ah.
2. Ku lulley dhexroorka sariirta. :640mm,
3. Distance between the hard rails :550mm
4. dhexroor ku yaal lathe gaariga: 480mm
5. biro adag oo saddex xagal ah
6. Spindle bore 105mm.
7. Spindle with gear box, automatic transfer for three speed grades.
H: 156—1200 rpm; M: 39—312.5 rpm; L: 14—112.5 rpm.
8. Beijing CBT 11.0 Mashiinka adeegga KW.
9. Model madaxa Spindle: C11/ 1:20/ Ø105mm
10. Manual three jaw chuck of 320mm diameter
11. GSK 980 controller
12. Awoodda mishiinka, qalabka dunta, saliid si toos ah, full cover protection for guild rail and ball screws.
| Model
faahfaahinta |
CN-SP63Z | |
| Faahfaahinta ugu weyn | Sariirta korkeeda ku lullaab | 640mm |
| Dhererka ugu badan ee gabal shaqo mashiinka | 460mm | |
| Awood | Dhexroorka mashiinka ugu badan ee sariirta | 630mm |
| Dhexroorka mashiinka ugu badan ee slider | 480mm | |
| Max length of machining | 460mm | |
| Bar dhexroorka alaabta | Ø103mm | |
| Dhererka dhexda lafdhabarta | 320mm | |
| Masaafada dhexe ee u dhaxaysa xoolaha dabada ilaa dunta dunta | Fogaanta u dhaxaysa dunta birta ilaa dabada | ///// |
| Spinal | Dhexroorka dunta lafdhabarta | Ø105mm |
| Taper ee dunta dunta | C11/ 1:20/ Ø105mm | |
| Kala duwanaanshaha xawaaraha lafdhabarta | Gear type automatic three gear shift. 14 —-12002 rpm H: 156—1200 rpm; M: 39—312.5 rpm; L: 14—112.5 rpm. | |
| turur | Max. safarka turret on dhidibka Z | 460mm |
| Max. safarka turret on dhidibka X | 450mm | |
| Xawaaraha dhaqsaha badan ee dhidibka Z | 8000mm/min | |
| Xawaaraha dhaqsaha badan ee dhidibka X | 6000mm/min | |
| boosaska Turret | nooca toosan 4 boosaska turret | |
| Cabbirka Turret | 32×32 mm | |
| NC turret | LD4B-CK6163 | |
| Mounting holes of drilling, boring | MT4 | |
| Fogaanta u dhaxaysa xarunta dunidu ilaa dusha taageerada | 32mm | |
| Matoorka | Awoodda dhaqdhaqaaqa ugu weyn | Beijing CBT 11 kw motor Howlsocodsiinta |
| Torque of Z dhidibka motor | 16 N.m | |
| Torque of X dhidibka motor | 6 N.m | |
| Bamka qaboojinta | AYB-20 0.115kw | |
| cabbirrada dulucda | 2610mm x 1850mm x 1900 mm | |
| Miisaanka saafiga ah | 3000 kgs |
saxnaanta baaritaanka mashiinka
| inspection item | Shiinaha Heerka | Factory caadiga ah |
| sax Machining | IT7 | IT7 |
| Machining shaqada gabal wareegsan | 0.005mm/φ50mm | 0.004mm/φ50mm |
| Mashiinka goos goos cylindricity | 0.03mm / 300mm | 0.02mm / 200mm |
| shaqada Machining planeness piece | 0.025mm/φ300mm | 0.015mm/φ200mm |
| shaqada Machining surfaceness piece | Ra2.5μm | Ra2.0μm |
| Saxnaanta booska | dhidibka X 0.03mm | dhidibka X 0.024mm |
| dhidibka Z-0.04mm | dhidibka Z-0.032mm | |
| Dib u dhig | dhidibka X 0.012mm | dhidibka X 0.01mm |
| dhidibka Z-0.016mm | dhidibka Z-0.012mm |
Qaabeynta mashiinka
| Agabka Magaca | Qaabka Tilmaamaha | Soo saaraha | tacliiq |
| CNC | GSK980 | GSK | |
| Matoorka ugu weyn | 11KW spindle servo motor | China Beijing CBT | |
| Matoorka dhidibka X | 6 N.m | GSK | |
| Matoorka dhidibka Z | 16 N.m | GSK | |
| dhalista dunmiiqa | P4 | China caanka ah ee Ha-dhidibka | |
| P4 | |||
| Spinal | 105 mm | Mashiinka Koonfureed | |
| Turret | Toosan 4 positions turret auto LD4B-CK6163 | HTC | |
| Kubbada dhidibka X | C3 | Bot / Wabiga Han | |
| Kubbada dhidibka-Z | C3 | Bot / Wabiga Han | |
| Xirmooyinka maroojiska kubbadda dhidibka-X | P4 | Cilmi-baarista dhidibka Harbin/Luo | |
| Xirmooyinka maroodiga ah ee kubbadda dhidibka-Z | P4 | Cilmi-baarista dhidibka Harbin/Luo | |
| Iftiin saddex midab leh | Saddex midab oo biligleynaya | ONN | |
| Qaybaha korontada muhiimka ah | Gudbinta/Xiriiriyaha | Japan’s Izumi/SwitzerlandABB/Schneider |
Qalabka mashiinka caadiga ah ee qalabka:
| No. | magaca dheeriga ah | Tilmaamaha Model | Tirada | tacliiq |
| 1 | Hagaajin geeska iyo boolasha | CN-SP63Z | 1 | Summada koonfureed |
| 2 | Qalabka digsiga | 1 | Saddex gullood | |
| 3 | Qalabka isku dhufashada | 1 | Summada Shiinaha | |
| 4 | Chuck | Manual jaw chuck diameter Φ320 | 1 | Summada Shiinaha |
Xogta farsamada:
| No. | Xogta farsamada Magaca | Nuqullo | tacliiq |
| 1 | Qalabka mashiinka gacanta (mashiinka)- makaanik iyo koronto | 1 | |
| 2 | Shahaado | 1 | |
| 3 | Kormeerka saxda ah | 1 | |
| 4 | Liiska Xidhmada | 1 | |
| 5 | Hawlgalka isticmaalaha gacanta ee kantaroolaha | 1 | |
| 6 | Buugga hawlgalka nidaamka xakamaynta | 1 | |
| 7 | jaantus koronto | 1 |
aad fariin noogu soo diri:
-
500mm ku lulaya sariirta cnc lathe-1000mm dhererka mashiinka
-
500mm Swing ka badan sariirood CNC lathe –1500mm dhererka machining
-
360mm Swing ka badan sariirood CNC lathe –1000mm dhererka machining
-
360mm Swing ka badan sariirood CNC lathe –750mm dhererka machining
-
420mm Swing ka badan sariirood CNC lathe –650mm dhererka machining
-
400mm Swing ka badan sariirood CNC lathe –750mm dhererka machining
-
500mm Swing ka badan sariirood CNC lathe –1500mm dhererka machining
-
500mm lulitaanka sariirta cnc lathe-1500mm dhererka mashiinka
