420mm Swing ka badan sariirood CNC lathe –650mm dhererka machining
Main performance（CN-SP4065A）:
1. Hal gabal oo ka mid ah saldhig iyo sariir, ilaali qallafsanaan ku filan iyo xasilloonida saxda ah.
2. Ku lulley dhexroorka sariirta. :420mm,
3. Fogaanta u dhaxaysa biraha rasaasta :380mm
4. dhexroor ku yaal lathe gaariga: 270mm
5. biro adag oo saddex xagal ah
6. Dhererka lafdhabarta 52mm.
7. Spindle with gear box, three speed automatic transfer
H: 275—2000 rpm. M: 112—820 rpm. L: 60—440 rpm
8. Beijing CBT 5.5kw servo motor.
9. Model madaxa Spindle: C6
10. Nidaamka GKS 980TDC ama nidaamka 980TDI
11. Awoodda mishiinka, qalabka dunta, saliid si toos ah, ilaalinta daboolka buuxa ee biraha guild iyo boolal kubbadda.
12. Buugga 3 daanka chuck dhexroor ah 200mm.
| Model
faahfaahinta |
CN-SP4065A | |
| Faahfaahinta ugu weyn | Sariirta korkeeda ku lullaab | 420mm |
| Dhererka ugu badan ee gabal shaqo mashiinka | 650mm | |
| Awood | Dhexroorka mashiinka ugu badan ee sariirta | 400mm |
| Dhexroorka mashiinka ugu badan ee slider | 270mm | |
| Dhererka ugu badan ee mashiinka(masaafada u dhaxaysa xoolaha dabada si ay u jeexan daanka) | 650mm | |
| Bar dhexroorka alaabta | Ø50mm | |
| Dhererka dhexda lafdhabarta | 260mm | |
| Masaafada dhexe ee u dhaxaysa xoolaha dabada ilaa dunta dunta | Fogaanta u dhaxaysa dunta birta ilaa dabada | ///// |
| Spinal | Dhexroorka dunta lafdhabarta | Ø52mm |
| Taper ee dunta dunta | C6 | |
| Kala duwanaanshaha xawaaraha lafdhabarta | Gear type automatic gear shift H: 275—2000 rpm. M: 112—820 rpm. L: 60—440 rpm | |
| turur | Max. safarka turret on dhidibka Z | 650mm |
| Max. safarka turret on dhidibka X | 260mm | |
| Xawaaraha dhaqsaha badan ee dhidibka Z | 8000mm/min | |
| Xawaaraha dhaqsaha badan ee dhidibka X | 6000mm/min | |
| boosaska Turret | nooca toosan 4 boosaska turret | |
| Cabbirka Turret | 25×25 mm | |
| Fogaanta u dhaxaysa xarunta dunidu ilaa dusha taageerada | 25mm | |
| Matoorka | Awoodda dhaqdhaqaaqa ugu weyn | Beijing CBT 5.5 Mashiinka adeegga KW |
| Torque of Z dhidibka motor | 10 N.m | |
| Torque of X dhidibka motor | 6 N.m | |
| Bamka qaboojinta | AYB-20 0.115kw | |
| Moodeelka qalab-haystaha | LD4 | |
| cabbirrada dulucda | 2700mm x 1600mm x 1900 mm | |
| Miisaanka saafiga ah | 750model mm | 2100 kgs |
saxnaanta baaritaanka mashiinka
| inspection item | Shiinaha Heerka | Factory caadiga ah |
| sax Machining | IT7 | IT7 |
| Machining shaqada gabal wareegsan | 0.005mm/φ50mm | 0.004mm/φ50mm |
| Mashiinka goos goos cylindricity | 0.03mm / 300mm | 0.02mm / 200mm |
| shaqada Machining planeness piece | 0.025mm/φ300mm | 0.015mm/φ200mm |
| shaqada Machining surfaceness piece | Ra2.5μm | Ra2.0μm |
| Saxnaanta booska | dhidibka X 0.03mm | dhidibka X 0.024mm |
| dhidibka Z-0.04mm | dhidibka Z-0.032mm | |
| Dib u dhig | dhidibka X 0.012mm | dhidibka X 0.01mm |
| dhidibka Z-0.016mm | dhidibka Z-0.012mm |
Qaabeynta mashiinka
| Agabka Magaca | Qaabka Tilmaamaha | Soo saaraha | tacliiq |
| CNC | GSK980 | GSK | |
| Matoorka ugu weyn | 5.5 KW spindle servo motor | China Beijing CBT | |
| Matoorka dhidibka X | 10 N.m | GSK | |
| Matoorka dhidibka Z | 4 N.m | GSK | |
| dhalista dunmiiqa | P4 | China caanka ah ee Ha-dhidibka | |
| P4 | |||
| Spinal | 52mm | Mashiinka Koonfureed | |
| Turret | Toosan 4 boosaska turret auto LD81 | HTC | |
| Kubbada dhidibka X | C3 | Bot / Wabiga Han | |
| Kubbada dhidibka-Z | C3 | Bot / Wabiga Han | |
| Xirmooyinka maroojiska kubbadda dhidibka-X | P4 | Cilmi-baarista dhidibka Harbin/Luo | |
| Xirmooyinka maroodiga ah ee kubbadda dhidibka-Z | P4 | Cilmi-baarista dhidibka Harbin/Luo | |
| Iftiin saddex midab leh | Saddex midab oo biligleynaya | ONN | |
| Qaybaha korontada muhiimka ah | Gudbinta/Xiriiriyaha | Japan Izumi / Switzerland ABB / Schneider |
Qalabka mashiinka caadiga ah ee qalabka:
| No. | magaca dheeriga ah | Tilmaamaha Model | Tirada | tacliiq |
| 1 | Hagaajin geeska iyo boolasha | CN-SP4065A | 1 | Summada koonfureed |
| 2 | Qalabka digsiga | 1 | Saddex gullood | |
| 3 | Qalabka isku dhufashada | 1 | Summada Shiinaha | |
| 4 | Chuck | Dhexroor daanka gacanta ee gacanta Φ200 | 1 | Summada Shiinaha |
Xogta farsamada:
| No. | Xogta farsamada Magaca | Nuqullo | tacliiq |
| 1 | Qalabka mashiinka gacanta (mashiinka)- makaanik iyo koronto | 1 | |
| 2 | Shahaado | 1 | |
| 3 | Kormeerka saxda ah | 1 | |
| 4 | Liiska Xidhmada | 1 | |
| 5 | Hawlgalka isticmaalaha gacanta ee kantaroolaha | 1 | |
| 6 | Buugga hawlgalka nidaamka xakamaynta | 1 | |
| 7 | jaantus koronto | 1 |
aad fariin noogu soo diri:
-
500mm ku lulaya sariirta cnc lathe-1000mm dhererka mashiinka
-
500mm Swing ka badan sariirood CNC lathe –1500mm dhererka machining
-
360mm Swing ka badan sariirood CNC lathe –1000mm dhererka machining
-
360mm Swing ka badan sariirood CNC lathe –750mm dhererka machining
-
420mm Swing ka badan sariirood CNC lathe –650mm dhererka machining
-
400mm Swing ka badan sariirood CNC lathe –750mm dhererka machining
-
500mm Swing ka badan sariirood CNC lathe –1500mm dhererka machining
-
500mm lulitaanka sariirta cnc lathe-1500mm dhererka mashiinka
