500මි.මී. –350යන්ත්රයේ දිග
Main performance(CN-X46)
1. Swing over lathe diameter 500mm
2. Lathe bed slope is 45 degree
3. One piece casting base and slanting bed
4. length of processing(self-produce chuck)350මි.මී.
5. length of processing(hydraulic chuck) 300මි.මී.
6. Roundness error is not exceeding 0.003mm,
7. The Z axis screw backlash is not exceeding 0.01mm
8. The X axis screw backlash is not exceeding 0.01mm
9. Ball screw and guide lead rail with the forced lubrication
10. The machine tool base is optimization designed under the finite element analysis.
11. යන්ත්රය හොඳ කාර්ය සාධනයක් ඉහළ නිරවද්යතාවයක් ඇත, අඩු ශබ්දය, නව ශෛලිය, ආදිය
ප්රධාන පිරිවිතර
පට්ටලයේ ආකෘතිය | CN-X46 | |
Main specifications | උපරිම. swing diam. පට්ටල උඩින් | 500මි.මී. |
Lathe bed slope | 45 degree | |
Processing range | උපරිම. diam. processing over the lathe | 480මි.මී. |
උපරිම. drilling diam.(axle and sleeve) | 158මි.මී. | |
උපරිම. length of processing(self-produce chuck) | 350මි.මී. | |
උපරිම. length of processing(hydraulic chuck) | 300මි.මී. | |
Max .diameter of the bar | Ø45mm | |
Height of the centre(from slide plate to the centre of the spindle) | 80මි.මී. | |
ස්පින්ඩ්ල් | Spindle bore | Ø56mm |
Type of the spindle head | A2-5 | |
Spindle head collet taper | කේතු 6 | |
උපරිම. speed of spindle | 6000r / min | |
Clamp | The hydraulic clamp | A2-5 |
ටර්ට් | ටර්ට් වර්ගය | Gang type |
Size of the turret | 20 x 20 මි.මී | |
උපරිම. size of the turret | Ø25mm | |
Feed shaft | උපරිම. X direction travel | 970මි.මී. |
උපරිම. Z direction travel | 395මි.මී. | |
X/Z. axle rapid movement speed | 24/24m/min | |
උපරිම. feeding speed of cutting | 8000mm / min | |
The Z axis screw backlash | ≦0.01 | |
The X axis screw backlash | ≦0.01 | |
Processing accuracy | Roundness | ≦0.003 |
Taper | ≦0.005/100 | |
Coaxiality | ≦0.004/100 | |
ස්ථාන නිරවද්යතාව | ±0.005 | |
Repeat position accuracy | ±0.0025 | |
Lubrication | Ball screw and guide lead rail with the forced lubrication | |
මෝටර් | ප්රධාන මෝටර් බලය(standard configuration) | 5.5kw |
Power of X axle / Z axle drive motor | 1.3kw | |
The longitudinal(Z direction)servo motor torque | 8.34එන්.එම් | |
The transverse(X direction)servo motor torque | 8.34එන්.එම් | |
Type of cooling pump | AYB-20 0.115KW | |
Total power | 12කි.වො | |
යන්ත්ර මානය(L x W x H) | 2170mm X 1700mm X 1850mm | |
බර | 2500 kg |
නිරවද්ය ප්රමිතිය
ඒකකය:මි.මී.
පරීක්ෂණ අයිතමය | චීන සම්මතය | කර්මාන්තශාලා ප්රමිතිය |
යන්ත්ර නිරවද්යතාවය | IT8 | IT8 |
යන්ත්රෝපකරණ වැඩ කොටස වටකුරු බවේ නිරවද්යතාවය | 0.007මි.මී. | 0.006මි.මී. |
යන්ත්රෝපකරණ වැඩ කොටස සිලින්ඩරාකාරයේ නිරවද්යතාවය | 0.015mm/F300mm | 0.013mm/F200mm |
මැෂින් වැඩ කෑලි මතුපිට | Ra3.2μm | Ra2.8μm |
වැඩ කෑලි සැලසුම් කිරීම | 0.02මි.මී. / 300මි.මී. | 0.018මි.මී. / 300මි.මී. |
මානකරන සම්මත උපාංග
නම | පිරිවිතර | වෙළඳ නාමය | සටහන් කරන්න |
ප්රධාන මෝටරය | 5.5 KW සර්වෝ මෝටරය | චීනයේ නිෂ්පාදිත | |
දඟර දරණ | පී 4 | චීනයේ නිෂ්පාදිත | |
X-අක්ෂ බෝල ඉස්කුරුප්පු ඇණ | සී 3 | චීනයේ නිෂ්පාදිත | |
Z- අක්ෂ බෝල ඉස්කුරුප්පු ඇණ | සී 3 | ||
චක් | 6’’ optional | චීනයේ නිෂ්පාදිත | |
විදුලි සංරචක | all | චීනයේ නිෂ්පාදිත |
සම්මත උපාංග:
නොමැත. | නම | පිරිවිතර | QTY |
1 | සොකට් හිස යතුර | 1 කට්ටලය | |
2 | විවෘත ස්පේනර් | 1 කට්ටලය | |
3 | බාර් යතුර | 1 කට්ටලය | |
4 | ස්පින්ඩල් පුල් සැරයටිය | 1 කට්ටලය | |
5 | Spindle flange | 1 කට්ටලය | |
6 | දිගු මෙවලම් පෝස්ට් | 4 කට්ටලය | |
7 | ධනාත්මක සහ සෘණ දිගු මෙවලම් පෝස්ට් | 1 කට්ටලය | |
8 | විදුම් මෙවලම් කණුව | 2 කට්ටලය | |
9 | වසන්ත චක් එකතු කරන්න | 2 කට්ටලය | |
10 | මෙවලම් පෙට්ටිය | 1 කට්ටලය |
තාක්ෂණික දිනය:
1. | මෙහෙයුම් උපදෙස් අත්පොත | 1 කට්ටලය |
2. | පද්ධති උපග්රන්ථ පිරිවිතර | 1 කට්ටලය |
3. | තත්ත්ව පරීක්ෂණ වාර්තාව | 1 කට්ටලය |
4. | ඇහුරුම් ලැයිස්තුව | 1 කට්ටලය |