520mm piu i runga i te moenga cnc lathe miihini pokapū-470mm te roa o te miihini
Main performance(CN-FD75)
1. One piece casting base and slanting bed keep good stable performance
2. Machine installation horizontal power living tool 12 positions, can turning and drilling and milling and threat for any side
3. Power living installation on Y-axis.
4. Swing over lathe diameter 520mm
5. turning length 475mm
6. turning diameter 310mm
7. The forms and codes of spindle A2-8
8. Adopt the structure of Y-axis power cutter tower.
9. He pai te mahi a te miihini, haruru iti, kāhua hou, etc
Main Whakapūtātanga
Tuhinga o mua | CN-FD75 | |||
Max. piu diam. over bed | 520mm | |||
Machining capacity | Max. te roa tahuri | 475mm | ||
Max. huri diameter | 310mm | |||
Diam. o te pae | 75mm | |||
Max. loading capacity | Momo paraharaha | 90kg | ||
shaft | 150kg | |||
Te tika o te tuunga | X/Z axis re- position accuracy | 0.005/0.01mm | ||
X/Z axis position accuracy | 0.01/0.02mm, | |||
Te teitei o te pokapū(from the bottom of machine) | 1125mm | |||
Spindle performance | Ko nga puka me nga waehere o te kororo mutunga | A2-8 | ||
Kohikohinga Kohikohinga kohikohi taper | DiameterØ100,1:20 | |||
I whanau te mokamoka | 90mm | |||
Tere tere | 30-3000r / min | |||
Tauini tere tere takahuri | stepless | |||
Whakauru Aunoa | 1r/min direct instruction/circumferential velocity | |||
Whakauru-a-ringa | 10r/min direct instruction/continuous control | |||
Te mana whakaputa motuka matua | Te whakatauranga 30-meneti | 18.5Kw | ||
Whakatauranga Tonu | 15Kw | |||
X/Z/Y motor torque | 15/15/10N.m | |||
Chuck Paerewa | Tuhinga o mua | 10’’ | ||
Z-Axis and X-axis specifications | X axis rapid movement speed | 20m / min | ||
Z axis rapid movement speed | 24m / min | |||
X axis linear guild | 35mm Ball roller type | |||
Z axis linear guild | 35mm Ball roller type | |||
Te haerenga o te tuaka X | 200mm | |||
Te haerenga o te tuaka Z | 680mm | |||
Tailstock specifications | Te diameter ringaringa o te hiku | 85mm | ||
Tuhinga o mua | 120mm | |||
Spindle collect taper of the tailstock | Koneone 4 | |||
Max. Tuhinga o mua | 8000N | |||
The tailstock body travel | 400mm | |||
Power
turret performance |
Momo o te taumarumaru | Horizontal power 12 working positions | ||
Wha whakawhiti whakawhiti: every workstation /30 degree including braking time | 0.12 S | |||
Maximum tool speed | 6000(4000 when continuous operation) | |||
Travel of Y axis | ±50mm | |||
Rahi o te taputapu tapahi | Taputapu tapahi porowhita a-waho | 20 x 20mm | ||
Te diameter o te mata ngenge | Diameter 32mm,25mm | |||
Ka taea te huri i te turret kaore ranei | Not | |||
Te waahanga miihini(L x W x H) | 3000mm X 1800mm X 2000mm | |||
Taumaha | 4800 kg | |||
paerewa tōtika
Unit:mm
tūemi Inspection | paerewa China | paerewa Factory |
pū machining | IT8 | IT8 |
Pū o te machining roundness mahi wahi | 0.007mm | 0.006mm |
Pū o te machining cylindricity mahi wahi | 0.015mm / Ф300mm | 0.013mm / Ф200mm |
surfaceness wahi mahi machining | Ra3.2μm | Ra2.8μm |
planeness wahi mahi machining | 0.02mm / 300mm | 0.018mm / 300mm |
Whirihoranga oko paerewa
ingoa | Whakapūtātanga | Brand | parau |
nekeneke Main | 15 KW servo motor | Hanga i roto i te haina | |
te whanau pou muka | P4 | Hanga i roto i te haina | |
X -axis takahuri pōro | C3 | Hanga i roto i te haina | |
ki te- tuaka takahuri pōro | C3 | ||
korukaru | 10”Kōwhiringa | Hanga i roto i te haina | |
wāhanga Electrical | All | Hanga i roto i te haina |
oko Paerewa:
Kao. | ingoa | Whakapūtātanga | Qty |
1 | He urunga mahunga upoko | 1 huinga | |
2 | Taonga tuwhera | 1 huinga | |
3 | Pae tawhaa | 1 huinga | |
4 | Koura toira | 1 huinga | |
5 | Whakapau piu | 1 huinga | |
6 | Pou taputapu roa | 4 huinga | |
7 | He pai, he kino hoki te pou taputapu roa | 1 huinga | |
8 | Pou taputapu keri | 2 huinga | |
9 | Puna kohikohi chuck | 2 huinga | |
10 | Pouaka Utauta | 1 huinga |
rā Hangarau:
1. | Pukapuka tohutohu mahi | 1 huinga |
2. | Whakatakotoranga taapiri punaha | 1 huinga |
3. | Pūrongo whakamātautau kounga | 1 huinga |
4. | rārangi pikau | 1 huinga |