500mm, sūpynės per lova CNC staklės –445mm staklėmis ilgis
Main performance(XN-X52L)
1. Swing over lathe diameter 500mm
2. Slanting bed slope 45 degree
3. One piece casting base and slanting bed
4. length of processing(self-produce chuck)445mm
5. length of processing(hydraulic chuck) 405mm
6. Roundness is not exceeding 0.003mm,
7. The Z axis screw backlash is not exceeding 0.01mm
8. The X axis screw backlash is not exceeding 0.01mm
9. Ball screw and guide lead rail uses the forced lubrication
10. The machine tool base is optimization designed under the finite element analysis.
11. The machine has good performance high precision, žemas garsas, naujas Stilius, ir tt
Pagrindinė specifikacija
Model of lathe | CN-X52L | |
Main specifications | daugiausia. swing diam. over lathe | 500mm |
Lathe bed slope | 45 degree | |
Processing range | daugiausia. diam. processing over the lathe | 480mm |
daugiausia. drilling diam.(axle and sleeve) | 295mm | |
daugiausia. length of processing(self-produce chuck) | 445mm | |
daugiausia. length of processing(hydraulic chuck) | 405mm | |
Max .diameter of the bar | Ø52mm | |
Height of the centre(from slide plate to the centre of the spindle) | 150mm | |
Suklys | Suklio kiaurasamtis | Ø62mm |
Type of the spindle head | A2-6 | |
Spindle head collect taper | Diameter 68,1:20 | |
daugiausia. speed of spindle | 3500r / min | |
Clamp | The hydraulic clamp | A2-6 |
bokštelis | Type of the turret | Gang type |
Size of the turret | 20 x 20mm | |
daugiausia. size of the turret | 25mm | |
Feed shaft | daugiausia. X direction travel | 970mm |
daugiausia. Z direction travel | 520mm | |
X/Z. axle rapid movement speed | 24/24m/min | |
daugiausia. feeding speed of cutting | 8000mm / min | |
The Z axis screw backlash | ≦0.01 | |
The X axis screw backlash | ≦0.01 | |
Processing accuracy | Roundness | ≦0.003 |
Taper | ≦0.005/100 | |
Coaxiality | ≦0.004/100 | |
Position accuracy | ±0.005 | |
Repeat position accuracy | ±0.0025 | |
Lubrication | Lead screw and guide rail uses the forced lubrication | |
variklis | Pagrindinis variklio galia(standard configuration) | 7.5kw |
Power of X axle / Z axle drive motor | 1.3kw | |
The longitudinal(Z direction)servo motor torque | 8.34N.m | |
The transverse(X direction)servo motor torque | 8.34N.m | |
Type of cooling pump | AYB-20 0.115KW | |
Total power | 15KW | |
Machine dimension(L x W x H) | 2400mm X 1900mm X 3000mm | |
Svoris | 3000 kilogramas |
Tikslumo standartas
Vienetas:mm
apžiūra prekės | Kinijos standartas | standartiniai gamykliniai nustatymai |
apdirbimo tikslumo | IT8 | IT8 |
Ruošinio apvalumo apdirbimo tikslumas | 0.007mm | 0.006mm |
Apdorojamo ruošinio cilindriškumo tikslumas | 0.015mm/Ф300mm | 0.013mm/Ф200mm |
Apdirbimo darbas gabalas surfaceness | Ra3,2μm | Ra2.8μm |
Apdirbimo darbas gabalas planeness | 0.02mm / 300mm | 0.018mm / 300mm |
Standartiniai konfigūracijos priedai
vardas | reikalavimas | Prekės ženklas | pastaba |
Pagrindinis variklis | 7.5 KW servo variklis | Pagaminta Kinijoje | |
suklio guolis | P4 | Pagaminta Kinijoje | |
X ašies rutulinis varžtas | C3- | Pagaminta Kinijoje | |
Z- ašies rutulinis varžtas | C3- | ||
chuck | 8” optional | Pagaminta Kinijoje | |
Elektriniai komponentai | All | Pagaminta Kinijoje |
Standartiniai priedai:
ne. | vardas | reikalavimas | KIEKIS |
1 | Socket head wrench | 1 rinkinys | |
2 | Open spanner | 1 rinkinys | |
3 | Bars wrench | 1 rinkinys | |
4 | Spindle pull rod | 1 rinkinys | |
5 | Spindle flange | 1 rinkinys | |
6 | Long tool post | 4 rinkinys | |
7 | Positive and negative long tool post | 1 rinkinys | |
8 | Drilling tool post | 2 rinkinys | |
9 | Spring collet chuck | 2 rinkinys | |
10 | Toolbox | 1 rinkinys |
Techninė data:
1. | Operating instruction manual | 1 rinkinys |
2. | System appendix specification | 1 rinkinys |
3. | Quality testing report | 1 rinkinys |
4. | Pakavimo sąrašas | 1 rinkinys |