ເກີນ 20 ມີປະສົບການຫລາຍປີໃນການຜະລິດເຄື່ອງກຣຶງໃນພາກໃຕ້ຂອງປະເທດຈີນ

500ມມມມມມມມມ CNC –350ຄວາມຍາວຂອງເຄື່ອງຈັກ mm

ລາຍລະອຽດສັ້ນ:

Main performance(CN-X46)
1. Swing over lathe diameter 500mm
2. Lathe bed slope is 45 degree
3. One piece casting base and slanting bed
4. length of processing(self-produce chuck)350ມມ
5. length of processing(hydraulic chuck) 300ມມ
6. Roundness error is not exceeding 0.003mm,
7. The Z axis screw backlash is not exceeding 0.01mm
8. The X axis screw backlash is not exceeding 0.01mm
9. Ball screw and guide lead rail with the forced lubrication
10. The machine tool base is optimization designed under the finite element analysis.
11. The machine has good performance high precision, ສຽງຕ່ ຳ, ແບບ ໃໝ່, ແລະອື່ນໆ

ລາຍລະອຽດຂອງສິນຄ້າ

ປ້າຍຜະລິດຕະພັນ

500ມມມມມມມມມ CNC –350ຄວາມຍາວຂອງເຄື່ອງຈັກ mm

Main performance(CN-X46)
1. Swing over lathe diameter 500mm
2. Lathe bed slope is 45 degree
3. One piece casting base and slanting bed
4. length of processing(self-produce chuck)350ມມ
5. length of processing(hydraulic chuck) 300ມມ
6. Roundness error is not exceeding 0.003mm,
7. The Z axis screw backlash is not exceeding 0.01mm
8. The X axis screw backlash is not exceeding 0.01mm
9. Ball screw and guide lead rail with the forced lubrication
10. The machine tool base is optimization designed under the finite element analysis.
11. The machine has good performance high precision, ສຽງຕ່ ຳ, ແບບ ໃໝ່, ແລະອື່ນໆ

ສະເພາະຕົ້ນຕໍ

Model of lathe CN-X46
Main specifications ສູງສຸດທີ່ເຄຍ. swing diam. over lathe 500ມມ
Lathe bed slope 45 degree
Processing range ສູງສຸດທີ່ເຄຍ. diam. processing over the lathe 480ມມ
ສູງສຸດທີ່ເຄຍ. drilling diam.(axle and sleeve) 158ມມ
ສູງສຸດທີ່ເຄຍ. length of processing(self-produce chuck) 350ມມ
ສູງສຸດທີ່ເຄຍ. length of processing(hydraulic chuck) 300ມມ
Max .diameter of the bar Ø45ມມ
Height of the centre(from slide plate to the centre of the spindle) 80ມມ
Spindle Spindle bore Ø56mm
Type of the spindle head A2-5
Spindle head collet taper Cone 6
ສູງສຸດທີ່ເຄຍ. speed of spindle 6000r / ນາທີ
Clamp The hydraulic clamp A2-5
ປ້ອມ Type of the turret Gang type
Size of the turret 20 x 20mm
ສູງສຸດທີ່ເຄຍ. size of the turret Ø25mm
Feed shaft ສູງສຸດທີ່ເຄຍ. X direction travel 970ມມ
ສູງສຸດທີ່ເຄຍ. Z direction travel 395ມມ
X/Z. axle rapid movement speed 24/24m/min
ສູງສຸດທີ່ເຄຍ. feeding speed of cutting 8000ມມ/ນທ
The Z axis screw backlash ≦0.01
The X axis screw backlash ≦0.01
Processing accuracy Roundness ≦0.003
Taper ≦0.005/100
Coaxiality ≦0.004/100
Position accuracy ±0.005
Repeat position accuracy ±0.0025
Lubrication Ball screw and guide lead rail with the forced lubrication
ມໍເຕີ ພະລັງງານມໍເຕີຕົ້ນຕໍ(standard configuration) 5.5ກິໂລວັດ
Power of X axle / Z axle drive motor 1.3ກິໂລວັດ
The longitudinal(Z direction)servo motor torque 8.34ນ.ມ
The transverse(X direction)servo motor torque 8.34ນ.ມ
Type of cooling pump AYB-20 0.115KW
Total power 12KW
Machine dimension(L x W x H) 2170mm X 1700mm X 1850mm
ນໍ້າ ໜັກ 2500 ກິ​ໂລກ​ຣາມ

ມາດຕະຖານທີ່ຊັດເຈນ

ໜ່ວຍ ງານ:ມມ

ລາຍການກວດກາ ມາດຕະຖານຈີນ ມາດຕະຖານຂອງໂຮງງານ
ຄວາມແມ່ນຍໍາເຄື່ອງຈັກ IT8 IT8
ຄວາມແມ່ນຍໍາຂອງເຄື່ອງຈັກເຮັດວຽກຮອບສິ້ນ 0.007ມມ 0.006ມມ
ຄວາມແມ່ນຍໍາຂອງເຄື່ອງຈັກເຮັດວຽກຂອງກະບອກສູບ 0.015mm / Ф300mm 0.013mm / Ф200mm
ດ້ານເຄື່ອງຈັກເຮັດວຽກ Ra3.2μm Ra2.8μm
ເຄື່ອງຈັກເຮັດວຽກຢ່າງລະອຽດ 0.02ມມ / 300ມມ 0.018ມມ / 300ມມ

ການຕັ້ງຄ່າອຸປະກອນເສີມມາດຕະຖານ

ຊື່ ໂດຍສະເພາະ ຍີ່ຫໍ້ ຂໍ້ສັງເກດ
ມໍເຕີຫລັກ 5.5 KW servo motor ຜະລິດຢູ່ປະເທດຈີນ
ເກິດ Spindle P4 ຜະລິດຢູ່ປະເທດຈີນ
ສະກູດບານ X -axis C3 ຜະລິດຢູ່ປະເທດຈີນ
ຈາກ- screw ບານແກນ C3
chuck 6’’ optional ຜະລິດຢູ່ປະເທດຈີນ
ສ່ວນປະກອບໄຟຟ້າ all ຜະລິດຢູ່ປະເທດຈີນ

ອຸປະກອນເສີມມາດຕະຖານ:

ບໍ່. ຊື່ ໂດຍສະເພາະ QTY
1 Socket head wrench 1 ຕັ້ງ
2 Open spanner 1 ຕັ້ງ
3 Bars wrench 1 ຕັ້ງ
4 Spindle pull rod 1 ຕັ້ງ
5 Spindle flange 1 ຕັ້ງ
6 Long tool post 4 ຕັ້ງ
7 Positive and negative long tool post 1 ຕັ້ງ
8 Drilling tool post 2 ຕັ້ງ
9 Spring collect chuck 2 ຕັ້ງ
10 Toolbox 1 ຕັ້ງ

ວັນທີເຕັກນິກ:

1. Operating instruction manual 1 ຕັ້ງ
2. System appendix specification 1 ຕັ້ງ
3. Quality testing report 1 ຕັ້ງ
4. ບັນຊີລາຍຊື່ການຫຸ້ມຫໍ່ 1 ຕັ້ງ

ສົ່ງຂໍ້ຄວາມຂອງທ່ານມາຫາພວກເຮົາ:

ສອບຖາມດຽວນີ້
ສອບຖາມດຽວນີ້