500mm kiik CNC treipingi kohal –325töötluse pikkus mm
Main performance(CN-X52)
1. Swing over lathe diameter 500mm
2. Slanting bed 45 kraadi
3. One piece casting base and slanting bed keep good stable performance for machine
4. length of processing(self-produce chuck)325mm
5. length of processing(hydraulic chuck) 275mm
6. Roundness is not exceeding 0.003mm,
7. The Z axis screw backlash is not exceeding 0.01mm
8. The X axis screw backlash is not exceeding 0.01mm
9. Ball screw and guide lead rail with the forced lubrication
10. The machine tool base is optimization designed under the finite element analysis.
11. Masinal on hea jõudlus ja suur täpsus, madal müratase, uus stiil, jne
Peamine spetsifikatsioon
Treipingi mudel | CN-X52 | |
Main specifications | Maks. kiige läbim. üle treipingi | 500mm |
Lathe bed slope | 45 kraadi | |
Processing range | Maks. diam. processing over the lathe | 480mm |
Maks. drilling diam.(axle and sleeve) | 295mm | |
Maks. length of processing(self-produce chuck) | 325mm | |
Maks. length of processing(hydraulic chuck) | 275mm | |
Max .diameter of the bar | Ø52mm | |
Height of the centre(from slide plate to the centre of the spindle) | 150mm | |
Spindel | Spindli auk | Ø62mm |
Type of the spindle head | A2-6 | |
Spindlipea tsangi koonus | Läbimõõt 68,1:20 | |
Maks. speed of spindle | 3500p / min | |
Clamp | The hydraulic clamp | A2-6 |
Turret | Torni tüüp | Gang type |
Size of the turret | 20 x 20mm | |
Maks. size of the turret | 25mm | |
Feed shaft | Maks. X direction travel | 970mm |
Maks. Z direction travel | 395mm | |
X/Z. axle rapid movement speed | 24/24m/min | |
Maks. feeding speed of cutting | 8000mm/min | |
The Z axis screw backlash | ≦0.01 | |
The X axis screw backlash | ≦0.01 | |
Processing accuracy | Roundness | ≦0.003 |
Taper | ≦0.005/100 | |
Coaxiality | ≦0.004/100 | |
Asukoha täpsus | ±0.005 | |
Repeat position accuracy | ±0.0025 | |
Lubrication | Ball screw and guide lead rail with the forced lubrication | |
Mootor | Main motor power(standard configuration) | 7.5kw |
Power of X axle / Z axle drive motor | 1.3kw | |
The longitudinal(Z direction)servo motor torque | 8.34N.m | |
The transverse(X direction)servo motor torque | 8.34N.m | |
Type of cooling pump | AYB-20 0.115KW | |
Total power | 15KW | |
Masina mõõtmed(P x L x K) | 2170mm X 1700mm X 1850mm | |
Kaal | 2800 kg |
Täppisstandard
Ühik:mm
Ülevaatusobjekt | Hiina standard | Tehase standard |
Töötlemise täpsus | IT8 | IT8 |
Töödeldava detaili ümaruse täpsus | 0.007mm | 0.006mm |
Töödeldava detaili silindrilisuse täpsus | 0.015mm / Ф300mm | 0.013mm / Ф200mm |
Töödeldava detaili mehaaniline töötlemine | Ra3,2μm | Ra2,8μm |
Töötleva detaili töötlemine | 0.02mm / 300mm | 0.018mm / 300mm |
Konfiguratsiooni standardvarustus
Nimi | Spetsifikatsioon | Bränd | Märkus |
Peamootor | 7.5 KW servo motor | Toodetud Hiinas | |
Spindli laager | P4 | Toodetud Hiinas | |
X -telje kuulkruvi | C3 | Toodetud Hiinas | |
KOOS- teljega kuulkruvi | C3 | ||
Kuidas treipingid töötavad | 8” valikuline | Toodetud Hiinas | |
Elektrilised komponendid | Kõik | Toodetud Hiinas |
Standardvarustus:
Ei. | Nimi | Spetsifikatsioon | KOGUS |
1 | Pistikupea mutrivõti | 1 seatud | |
2 | Ava mutrivõti | 1 seatud | |
3 | Varraste mutrivõti | 1 seatud | |
4 | Spindli tõmbevarras | 1 seatud | |
5 | Spindli äärik | 1 seatud | |
6 | Pikk tööriistapost | 4 seatud | |
7 | Positiivne ja negatiivne pikk tööriistapost | 1 seatud | |
8 | Puurimistööriista post | 2 seatud | |
9 | Vedrupadruni padrun | 2 seatud | |
10 | Tööriistakast | 1 seatud |
Tehniline kuupäev:
1. | Kasutusjuhend | 1 seatud |
2. | Süsteemi lisa spetsifikatsioon | 1 seatud |
3. | Kvaliteedi testimise aruanne | 1 seatud |
4. | Pakkimisnimekiri | 1 seatud |