dros 20 mlynedd o brofiad i wneud y peiriant turn yn y de o llestri

Pam defnyddio peiriannau turn?

A tilt bed Lathe machine is a mechanical device that has a 30-degree tilt to it—spindle with exceptional accuracy, speed, and velocity. During lighters, it is most suited for the production of medium-sized components like aircraft, vehicles, and glasses. Rough steering, gear shifting, & hydraulic tightening are all used on the slight slanting bed CNC lathe machine.

  • Lathe with a Flat Bed:

It can treat both lightweight & heavy-duty items with pinpoint accuracy. Flatbed lathes get a wide machining range, are stable, and produce a lot of work. As it is highly equipped equipment, this sort of lathe will only be managed by qualified machine dealers. If it is not used properly, it may cause serious damage.

  • Lathe with a Slant Bed:

It’s recommended that you use it exclusively with light fabrics. This slant bed lathe does have a reduced range of efficiency due to its machining power. It’s a simple-to-use lathe that makes machining a lot easier.

What is the difference between such a slant bed CNC lathe and a flatbed CNC lathe?

The Peiriannu turn CNC has a bed cross-section area that is the same width as the bed level, implying bending resistance & torsional strength.

The Machine CNC turning centre by lathe cutting tools manufacturers. It is cut diagonal direction above the workpiece, associated with the direction of cutting gravitational effects & workpiece, spindle functioning relatively smoothly, extremely easy to activate vibration cutting, flatbed truck CNC lathe cutting device & workpiece cutting conditions produced by a gravitational pull to the workpiece 90 degrees, simple to trigger vibration slashing.

Comparison of machining accuracy

The repeatability of the CNC lathe screw driver is a long ball screw, a lead screw, as well as a nut drive gap between both the small ones, but that is not because there really is no gap, but rather because as long as there is a gap when the screw is in one path and then in reverse gear when backlash inevitably takes place, the replicability of the CNC lathes affects the machine’s accuracy.

Slanting bed with a gap the design of the X-direction ball screw will be immediately influenced by the CNC lathe, with gravity acting directly on the axial screws, reducing backlash to nearly nothing. The gap could not be reduced immediately because the X-direction of the tabletop CNC lathe, even without the axial screw, is influenced by gravity.

Despite taking into account all designs, a flatbed made by Southlathe is more ideal when it refers to the necessity for additional construction.


Amser postio: 2021-09-28
YMCHWILIAD YN AWR