500мм люлка над легло струг с ЦПУ –325mm дължина машинна
Main performance(CN-X52)
1. Swing over lathe diameter 500mm
2. Slanting bed 45 degree
3. One piece casting base and slanting bed keep good stable performance for machine
4. length of processing(self-produce chuck)325mm
5. length of processing(hydraulic chuck) 275mm
6. Roundness is not exceeding 0.003mm,
7. The Z axis screw backlash is not exceeding 0.01mm
8. The X axis screw backlash is not exceeding 0.01mm
9. Ball screw and guide lead rail with the forced lubrication
10. The machine tool base is optimization designed under the finite element analysis.
11. The machine has good performance high precision, ниско ниво на шум, нов стил, и т.н.
Главна Спецификация
Model of lathe | CN-X52 | |
Main specifications | Max. swing diam. over lathe | 500mm |
Lathe bed slope | 45 degree | |
Processing range | Max. diam. processing over the lathe | 480mm |
Max. drilling diam.(axle and sleeve) | 295mm | |
Max. length of processing(self-produce chuck) | 325mm | |
Max. length of processing(hydraulic chuck) | 275mm | |
Max .diameter of the bar | Ø52mm | |
Height of the centre(from slide plate to the centre of the spindle) | 150mm | |
Вретено | Отвор на шпиндела | Ø62mm |
Type of the spindle head | A2-6 | |
Spindle head collet taper | Diameter 68,1:20 | |
Max. speed of spindle | 3500/ мин | |
Clamp | The hydraulic clamp | A2-6 |
куличка | Type of the turret | Gang type |
Size of the turret | 20 x 20mm | |
Max. size of the turret | 25mm | |
Feed shaft | Max. X direction travel | 970mm |
Max. Z direction travel | 395mm | |
X/Z. axle rapid movement speed | 24/24м/мин | |
Max. feeding speed of cutting | 8000мм / мин | |
The Z axis screw backlash | ≦0.01 | |
The X axis screw backlash | ≦0.01 | |
Processing accuracy | Roundness | ≦0.003 |
Taper | ≦0.005/100 | |
Coaxiality | ≦0.004/100 | |
Точност на позицията | ±0.005 | |
Repeat position accuracy | ±0.0025 | |
Lubrication | Ball screw and guide lead rail with the forced lubrication | |
Мотор | Основна мощност на двигателя(standard configuration) | 7.5kw |
Power of X axle / Z axle drive motor | 1.3kw | |
The longitudinal(Z direction)servo motor torque | 8.34N.m | |
The transverse(X direction)servo motor torque | 8.34N.m | |
Type of cooling pump | AYB-20 0.115KW | |
Total power | 15KW | |
Machine dimension(L x W x H) | 2170mm X 1700mm X 1850mm | |
тегло | 2800 килограма |
Прецизно стандарт
Мерна единица:mm
т инспекция | Китай стандарт | Фабрика стандарт |
Механична точност | IT8 | IT8 |
Точност на обработка работа парче закръгленост | 0.007mm | 0.006mm |
Точност на обработка работа парче на цилиндрична форма | 0.015мм / Ф300mm | 0.013мм / Ф200mm |
Механична работа парче surfaceness | Ra3.2μm | Ra2.8μm |
Механична работа парче planeness | 0.02mm / 300mm | 0.018mm / 300mm |
Стандартната конфигурация аксесоари
име | спецификация | Марка | Забележка |
Главен мотор | 7.5 KW серво мотор | Произведено в Китай | |
шпиндела лагер | P4 | Произведено в Китай | |
X-ос СВД | С3 | Произведено в Китай | |
с- ос СВД | С3 | ||
chuck | 8” optional | Произведено в Китай | |
Електрически компоненти | All | Произведено в Китай |
Стандартни аксесоари:
Не. | име | спецификация | КОЛ |
1 | Socket head wrench | 1 комплект | |
2 | Open spanner | 1 комплект | |
3 | Bars wrench | 1 комплект | |
4 | Spindle pull rod | 1 комплект | |
5 | Spindle flange | 1 комплект | |
6 | Long tool post | 4 комплект | |
7 | Positive and negative long tool post | 1 комплект | |
8 | Drilling tool post | 2 комплект | |
9 | Spring collet chuck | 2 комплект | |
10 | Toolbox | 1 комплект |
Технически дата:
1. | Инструкция за експлоатация | 1 комплект |
2. | Спецификация на системното приложение | 1 комплект |
3. | Доклад за изпитване на качеството | 1 комплект |
4. | списък Опаковка | 1 комплект |